思科设备交换机vlantrunk配置.pdf
版权申诉
140 浏览量
2023-11-15
18:37:59
上传
评论
收藏 59KB PDF 举报
vlan trunk
switchA
Switch>
Switch>enable
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode, as VLAN database
mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in
config mode.
Switch(vlan)#vlan 2 name TztA
VLAN 2 added:
Name: TztA
Switch(vlan)#vlan 3 name TztB
VLAN 3 added:
Name: TztB
Switch(vlan)#exit
APPLY completed.
Exiting ...
Switch#wr
Building configuration...
[OK]
Switch#config t
Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#int f0/1
Switch(config-if)#sw mo ac
Switch(config-if)#sw acc vlan 2
Switch(config-if)#int f0/2
Switch(config-if)#sw mo ac
Switch(config-if)#sw acc vlan 3
Switch(config-if)#exit
Switch(config)#exit
Switch#
%SYS-5-CONFIG_I: Configured from console by console Switch#show vlan
VLAN Name Status Ports
1 default active Fa0/3, Fa0/4, Fa0/5, Fa0/6 Fa0/7, Fa0/8, Fa0/9, Fa0/10 Fa0/11, Fa0/12,
Fa0/13, Fa0/14 Fa0/15, Fa0/16,
Fa0/17, Fa0/18 Fa0/19, Fa0/20,
Fa0/21, Fa0/22 Fa0/23, Fa0/24,
Gig1/1, Gig1/2
2 TztA active Fa0/1
3 TztB active Fa0/2
1002 fddi-default act/unsup
资源评论
