.
'.
1. 和装机人员核实现场 ONU 连接的 PON 口和 SN 码是否与后台系统分配的一致。
SHCZ-ShuNiuLou-C220-1#show running-config interface epon-olt_0/4/1
Building configuration...
no shutdown
vlan-smart-qinq enable
p2p mode group
onu 2 type ZTE-F420 snHZ95ip-cfg static
!
2. 核实现场 ONU 的状态
HCZ-ShuNiuLou-C220-1#show onu all-status epon-olt_0/4/1
Onu Interface Regstatus Status
.......................................................
epon-onu_0/4/1:2 authenticated Power-Off(online,offline)
power-off:表示设备断电 online:在线且正常运行 offline:离线,可考虑光路
3. 查看 ONU 端口配置
HCZ-ShuNiuLou-C220-1#show running-config interface epon-onu_0/4/1:2
Building configuration...
switchport mode trunk vport 1
switchportvlan 1,2010 tag vport 1//此处是否透传了语音 vlan
authentication enable
sn MZ95
description $$MZ95$$
spliter 1 line 1
user-infozte
bandwidth upstream fixed 0 fixedpkt 64 assured 1000 maximum 1000000 maxburst
45000 priority 0
bandwidth downstream maximum 999994 maxburst 15054910
encrypt direction downstream enable
bind-status disable
autocfg disable
4. 查看 OLT 远程下发到 ONU 的数据
HCZ-ShuNiuLou-C220-1#show onu running config epon-onu_0/4/1:2
pon-onu-mng epon-onu_0/4/1:2
no Forbid-auto-dispatch
no Forbid-auto-dispatch voip ////注意检查此项(语音信息自动下发开启)
interface eth eth_0/1 policing upstream enable cir 1024 cbs 10000 ebs 1518
vlan port eth_0/1 mode tag vlan 2001 priority 0//宽带端口 1 业务 vlan
!
pon-onu-mng epon-onu_0/4/1:2
voip-module global-pro ip batchconfig2vlan batchconfig2//IP 模板,VLAN 模板
voip-module protocol-pro sip batchconfig2//接入 SS 的模板
voip-module fax-pro default//传真模板
voipip-address 172.18.47.2 mask 255.255.255.0 slot 1//ONU 上的语音 ip 地址