Ralink雷凌RT5572 USB无线网卡驱动--windows

[V2.x.x.x] [V2.6.0.1] 1. Add WFD support 2. Add WIDI 3.5 support & bug fix 3. Add Switch Channel Offload support for RT5572 4. Update ATE & chip related 5. Apple Router TSN security fix 6. Add wpa_supplicant support WPS in -Dwext 7. Add cfg80211 modification [V2.6.0.0] 1. Add modifications of Samsung TV Project 2. P2P Related Fix : 1). Fixed STA TGn 5.2.18 failed if p2p interface is also up 2). Reduce P2P Action frame response time 3). Add P2pTableSemLock 4). Fixed P2P GO cannot be found by Samsung G2 802.11 scan 5). Fixed P2P CLI sometimes would have beacon lost 6). Fixed P2P CLI memory leakage issue 7). Add P2P concurrent 20/40BW support 8). Modify InsertP2PSubelmtTlv() by cases 9). fix beacon lost the ra0 can't linkdown if p2p0 has traffic 10). Fix P2P GO will always in silent mode on DFS channel. when IEEE80211H is turned on 11). APCLI and P2P CLI don't need to do PIN attack checking. 3. WPS Related Fix : 1). Registrars (both internal and external) shall add the AuthorizedMACs subelement, this applies to all Configuration Methods, including PIN, PBC and NFC 2). Add modifications for preventing complained by Coverity 3). Fix WSC test plan 5.1.1 failed at step 10. 4. P2P Related Ehancement : 1). Add Set_P2P_SecDevTypeList_Proc() to set 2nd device list 2). Change time period of sending probe request before send Provision Discovery Request or P2P GO Nego Request from 1s to 100ms in P2P GO mode. 3). Modify WscBuildAssocReqIE for P2P CLI to send ASSOC Req with WPS IE. 5. Sync with latest register update.(RT5592_RT5592EP_RT5572_RF_BBP_MACregister_2012_0208.xls) 6. Enhance Date Rate checking mechanism 7. Enhance BBP/RF/MCU protection. 8. Fix sometimes scan table may always empty. (Check MAC Tx/Rx idle before change BBP_R4 value in MlmeScanReqAction()) 9. Add frequency calibration for USB related chips 10. Fixed STA scanning issue (When table is full) 11. Add dynamic L2SD cmds [V2.5.0.0] 1. Add mac80211 iw utility other commands support. Rename crda.c to cfg80211.c, CRDA_SUPPORT to RT_CFG80211_SUPPORT. 2. Fix issue: No McuCmdLock initialization for RT3592/RT3390. 3. Fix issue: The start address of HeaderBuf must be aligned by 4 when VENDOR_FEATURE1_SUPPORT is enabled. 4. WMM ACM: see history of acm_comm.c. 5. Fix issue: sometimes rt2860_interrupt() will be called before rt28xx_init() in fedora core 7. 6. Add RT3592 PCIe chip ID. 7. Fix issue in 64bit CPU: (1) WMM ACM: see history of acm_comm.c. (2) Fix function RTMP_MapChannelID2KHZ(). 8. CFG80211: Patch for Linux 2.6.32. 9. Add an ATE command for AUTOALC. 10. Add an ATE command for interpacket GAP. 11. Add an ATE command for ATE payload pattern. 12. Fix issue: UAPSD SP can not be closed correctly for mix-mode power save. UAPSD + legacy PS. 13. [Bug fixed] The extended rate of probe-req is disappeared in AP-Client mode 14. Add RT3593 PCI/PCIe AP/STA. 15. Fix issue: kernel panic when we forward VLAN bc/mc packet to wireless LAN. 16. Fix issue: some reports from Prevent software analysis tool. 17. Fix issue: get wrong VLAN priority from VLAN tag in RTMPCheckEtherType(). 18. Fix issue: no 11b basic rate in beacon when we change WirelessMode to 2.4G, then 5G, then 2.4G 19. Fix issue: no 11b-only mode can be set in AP mode. 20. MBSS: add function to set different phy mode for different BSS. 21. Phy Mode: add check if the chip supports 5G band when WirelessMode is 5G band for command WirelessMode and MBSSWirelessMode. 22. QLOAD: Fix issue for big endian. Or value of QLOAD element in beacon will be wrong. 23. USB: Fix timer trigger fail after APStop and then APStartup. Side effect1: Power save can not work in AP mode when you do channel switch because channel switch will do APStop() and APStart(). Side effect2: After radion on/off, TIM will not be updated due to beacon timer is not started. 24. Station: Add new rate switch algorithm (AGS) for 1*1, 2*2, 3*3. 25. AP: Fix power save problem when station is in power-save mode and send (re)associate frame again we will think the station is still in PS mode, but the station is in ACTIVE mode. 26. TX Block: Fix no packet can be sent when TX Fail count > a threshold for non-WDS interface in RTMPDeQueuePacket(). 27. Fix WPS issue: WPS process failed with some WPS Client that sends dis-assoc close to WSC_DONE. 28. Refine the stack size of all functions to be smaller than 300B. 29. Fix bugs when protocol field of packet & 0x8080 does not equal to 0. Such as PPPOE. 30. Fix issue: Wrong MACRO use for RTMP_SET_PACKET_DHCP ~ RTMP_SET_PACKET_IPV4. 31. Fix ACM issue: Need also to unlock after calling ACMP_MsduClassify() in USB. 32. Fix IGMP bc/mc User Priority issue: Need also to get UP for bc/mc packets. [V2.4.0.0] 1. AMSDU supports NO-ACK. 2. Added new channel list of A-Band Region 16 3. Basic Ethtool support. (i.e. GSO) 4. Fix issue: PCI command thread initialization in pci_main_dev.c init_waitqueue_head(&pAd->cmdQTask.kthread_q); for KTHREAD_SUPPORT 5. WMM ACM: see history of acm_comm.c. 6. Fix issue: When PS-Poll is received in AP and STA is not WMM device and no any queued packet, we will reply DATA NULL frame. We will double-lock. 7. AP QLOAD: Add compile option. 8. Add CRDA function in Linux 2.6.28 above. 9. Increase channel property. Property is only set in CRDA function currently. 10. RSSI feedback supported(only with Ralink client). 11. Fix issue: Wmm capable will be enabled from ABG mode to N mode but Wmm capable is not recovered when from N mode to ABG mode. 12. Two iwpriv commands "ACLDelEntry" and "ACLShowAll" are added. 13. Support 802.11v draft 5.0 WNM - BSS transition Management and DMS. 14. Add OS abstract layer partition, util.ko, driver.ko, and netif.ko 15. Support ApClient WPS PBC. [V2.3.0.0] 1. WMM ACM AP/STA support. (Pass WiFi Test Plan v0.30) 2. Add HAS_STATS_COUNT compile option. 3. Provide some 802.1x parameter support(Quiet-period, idle-timeout, NAD-ID). 4. Fix issue : The Tx date rate can't be fixed in B/G PHY mode. 5. QLOAD: Add status information display function. "qload show" & QloadClr. 6. QLOAD: Add channel busy alarm and a command thread in PCI/USB driver. 7. It supports the MAC assignment from configuration file(.dat). 8. Fix issue : No packet is delivered from AP when PsMode from PS to ACTIVE. 9. Fast Power Save : Use Null frame with PM=0 to get buffered packet, not PS-Poll in station mode. 10. miniupnpd supported. 11. AP-Client and WDS support fixed rate. 12. Support GreenAP. 13. Support Single SKU. 14. Fix issue : RT3062/RT3562 can't enable/disable Radio. 15. Discard IgmpSn enable setting per BSSID and change it to as global setting. [V2.2.0.0] 1. New generation schema for multiple OS porting 2. New chip support for RT3572 3. New chip support for RT3062/RT3562 4. Restrict the encryption type in HT mode. 5. Support 802.1x reauthentication mechanism. 6. Limit the STA connection count per BSS. 7. Some variables support MBSS setting. 8. Support WDS entry life check function. 9. Support Mesh Air link time. 10. Support Mesh Link Metric report action. 11. Support Dot11K RRM for all testing cases of voice-enterprise testing event. 12. Performance Tune. [V2.1.1.0] 1. fix eFuse bug on big-endian platform 2. fix WMM problem for RT3071/72 3. fix one bug for ATE TX power handling and ATE frequency offset bug. 4. fix mesh crash issue 5. fix RT307x AMPDU throughput bug after interface down/up 6. update RT307x new firmware. [V2.1.0.0] 1. Support new chips RT3070/71/72, RT3090/91/92. 2. Fix bugs: fix WMM, Mesh, WDS, AP Client and DLS problems for Amazon SE platform 3. Fix bug: memory leakage problem when interface up/down. 4. Support eFuse. [V2.0.0.0] 1. Added Global Country Domain supported. 2. Fix bug: suspend/resume error when ra0 down, rax up 3. Add new UAPSD SP counting mechanism. 4. Fix bug: Ikanos WDS, AP Client, Mesh int