//------------------------------------------------------------------------
// Readme.txt
//------------------------------------------------------------------------
This project stationery is designed to get you up and running
quickly with CodeWarrior for MC9S12DP256B.
It is set up for the selected CPU and target connection,
but can be easily modified.
Sample code for the following language(s) is at your disposal:
- C
The wizard has prepared CodeWarrior target(s) with the connection methods
of your choice:
- P&E Multilink/Cyclone Pro:
This Connection allows to debug with the P&E BDM Multilink (USB and parallel)
or P&E Cyclone Pro (USB, Serial and TCP/IP)..
Please check the P&E hardware documentation for additional details.
Additional connections can be chosen in the simulator/debugger,
use the menu Component > Set Target.
//------------------------------------------------------------------------
// Getting Started
//------------------------------------------------------------------------
To build/debug your project, use the menu Project > Debug or press F5.
This will open the simulator/debugger.
Press again F5 in the debugger (or menu Run > Start/Continue) to start
the application. The menu Run > Halt or F6 stops the application.
In the debugger menu Component > Open you can load additional components.
//------------------------------------------------------------------------
// Project structure
//------------------------------------------------------------------------
The project generated contains various files/folders:
- readme.txt: this file
- Sources: folder with the application source code
- Startup Code: Only stack pointer is set up (minimal startup code). If
you want to set up global variables as well, remove -D__ONLY_INIT_SP
from the compiler command line.
- Prm:
- burner.bbl file to generate S-Records
- the linker .prm file
- Linker Map: the .map file generated by the linker
- Libraries: needed library files (ANSI, derivative header/implementation
files)
- Debugger Project File: contains a .ini file for the debugger for each
connection
- Debugger Cmd Files: contains sub-folders for each connection with
command files
//------------------------------------------------------------------------
// Adding your own code
//------------------------------------------------------------------------
Once everything is working as expected, you can begin adding your own code
to the project. Keep in mind that we provide this as an example of how to
get up and running quickly with CodeWarrior. There are certainly other
ways to handle interrupts and set up your linker command file. Feel free
to modify any of the source files provided.
// Simulator/Debugger: Additional components
//------------------------------------------------------------------------
In the simulator/debugger, you can load additional components. Try the
menu Component > Open.
//------------------------------------------------------------------------
// Additional documentation
//------------------------------------------------------------------------
Read the online documentation provided. Use in CodeWarrior IDE the menu
Help > CodeWarrior Help.
//------------------------------------------------------------------------
// Contacting Metrowerks
//------------------------------------------------------------------------
For bug reports, technical questions, and suggestions, please use the
forms installed in the Release_Notes folder and send them to:
cw_support@freescale.com
没有合适的资源?快使用搜索试试~ 我知道了~
资源推荐
资源详情
资源评论
收起资源包目录
基于149单片机的无线收发模块NRF2401的单片机无线通信程序 (574个子文件)
2401_RX 14KB
2401_Tx 14KB
nrf2401._c 8KB
nrf2401._c 8KB
main._c 2KB
main._c 2KB
initial._c 589B
initial._c 589B
config._h 385B
config._h 385B
STARTUP.A51 6KB
STARTUP.A51 6KB
STARTUP.A51 5KB
STARTUP.A51 5KB
P&E_Multilink_CyclonePro.abs 212KB
P&E_Multilink_CyclonePro.abs 166KB
ASM.ASM 3KB
ASM 0B
2401_RX_Uv2.Bak 2KB
HX_LED_RECEIVE_Uv2.Bak 2KB
HX_LED_SEND_Uv2.Bak 2KB
HX_LED_RECEIVE_Opt.Bak 2KB
HX_LED_SEND_Opt.Bak 1KB
2401_RX_Opt.Bak 897B
ADC10_sch_st.cspy.bat 2KB
Wireless_Receiver.cspy.bat 2KB
Wireless_Transceiver.cspy.bat 2KB
V10.cspy.bat 2KB
burner.bbl 3KB
burner.bbl 3KB
NRF2401.Bkp 218KB
NRF2401功能模块.bmp 1.1MB
配置字.bmp 1MB
引脚图.bmp 827KB
引脚2.bmp 604KB
datapage.c 67KB
datapage.c 67KB
Start12.c 22KB
Start12.c 22KB
LED_DISP.C 17KB
main-tx.c 12KB
main-rx.c 11KB
nRF2401V1.0.c 10KB
nrf2401.c 8KB
nrf2401.c 8KB
MAIN.C 7KB
RECEIVE.C 7KB
RX_TC.C 6KB
SEND.C 6KB
lcd.c 6KB
lcd.c 6KB
RX_TC.C 5KB
OCMJ4X8C.c 3KB
main.c 3KB
main.c 3KB
display.c 3KB
display.c 3KB
main(TX).c 3KB
main.c 3KB
main.c 3KB
main.c 2KB
main.c 2KB
main.c 2KB
main.c 2KB
main.c 2KB
main.c 2KB
main(RX).c 2KB
main.c 2KB
main.c 2KB
main.c 1KB
main.c 1KB
main.c 1KB
main.c 1KB
main.c 1KB
MAIN.C 1KB
main.c 1KB
main.c 1017B
MAIN.C 897B
main.c 837B
main.c 746B
MAIN.C 703B
initial.c 587B
initial.c 587B
Delay.c 374B
Delay.c 353B
Convert.c 296B
P&E_Multilink_CyclonePro_Erase_unsecure_hcs12.cmd 3KB
P&E_Multilink_CyclonePro_Erase_unsecure_hcs12.cmd 3KB
P&E_Multilink_CyclonePro_Vppon.cmd 78B
P&E_Multilink_CyclonePro_Vppon.cmd 78B
P&E_Multilink_CyclonePro_Vppoff.cmd 77B
P&E_Multilink_CyclonePro_Vppoff.cmd 77B
P&E_Multilink_CyclonePro_Startup.cmd 61B
P&E_Multilink_CyclonePro_Startup.cmd 61B
P&E_Multilink_CyclonePro_Preload.cmd 60B
P&E_Multilink_CyclonePro_Reset.cmd 60B
P&E_Multilink_CyclonePro_Preload.cmd 60B
P&E_Multilink_CyclonePro_Reset.cmd 60B
P&E_Multilink_CyclonePro_Postload.cmd 59B
P&E_Multilink_CyclonePro_Postload.cmd 59B
共 574 条
- 1
- 2
- 3
- 4
- 5
- 6
SuperwarriorOne
- 粉丝: 13
- 资源: 2
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- pta题库答案c语言之排序4统计工龄.zip
- pta题库答案c语言之树结构7堆中的路径.zip
- pta题库答案c语言之树结构3TreeTraversalsAgain.zip
- pta题库答案c语言之树结构2ListLeaves.zip
- pta题库答案c语言之树结构1树的同构.zip
- 基于C++实现民航飞行与地图简易管理系统可执行程序+说明+详细注释.zip
- pta题库答案c语言之复杂度1最大子列和问题.zip
- 三维装箱问题(Three-Dimensional Bin Packing Problem,3D-BPP)是一个经典的组合优化问题
- 以下是一些关于Linux线程同步的基本概念和方法.txt
- 以下是一个简化的示例,它使用pygame库来模拟烟花动画的框架.txt
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功
- 1
- 2
前往页