没有合适的资源?快使用搜索试试~ 我知道了~
基于单片机的遥控数显控制系统本科论文.doc
0 下载量 51 浏览量
2023-07-09
10:02:10
上传
评论
收藏 1.73MB DOC 举报
温馨提示
试读
55页
基于单片机的遥控数显控制系统本科论文.doc
资源推荐
资源详情
资源评论
毕 业 设 计(论 文)
基于单片机的遥控数显控制系统
基于单片机的遥控数显控制系统
(硬件、软件设计)
摘 要
近年来,随着人们对生活便利性的需求越来越高,能够对不同类型信号的监测和报警
的设备也越来越多。现在的报警器功能也越来越智能化。在感知的信号方面有红外信号、
超声波信号、重力信号、震动信号、遥控信号等。本文通过对几种报警器的功能以及实际
情况分析,设计了一种安全、实用、方便控制的报警器。
本文首先阐述了报警器的研究状况和发展现状,以及不同类型报警器的优点和当前的
普及程度。分析了一般报警器的检测原理和物理机制。根据常用的检测信号类型,选取了
遥控信号、红外信号和温度信号作为本设计的检测依据。
红外技术是一种发展很成熟的技术,由于它是不可见光,用在防盗报警系统上有良好
的隐蔽性,而且可以在不同的天气条件下都可以使用,抗干扰能力也比较强。这种报警系
统在家庭、场馆以及办公室等场合有广泛的使用。由于红外技术自身的优势,本设计以红
外信号作为一种检测信号。
温度是日常生活中最经常遇到的一个变量,温度值是很多报警系统所采纳的一个信号。
特别是火灾报警设备中,温度信号是必不可少的一个值。对于具体的实物或是环境,温度
往往是一个最直观的数据,通过对温度值的监测可以对现场情况做趋势的研判,对后续的
操作提供一定的依据。
随着设备智能化的发展,遥控技术越来越受到重视。通过遥控方式可以对受控对象进
行远距离的控制和监测。在报警系统中占有重要的位置,不仅可以远距离的遥控报警设备,
可以远距离的监测终端的基本情况。随着遥控技术的成熟,在报警系统中也得到越来越多
的使用。
本设计选取遥控信号、红外信号和温度信号作为监测信号。遥控信号用来远程控制报
警器的开启与关闭。报警器开启之后,同时监测红外信号和温度信号,两个信号中有一个
达到阈值则开始报警。
关键字:报警器;遥控;红外;温度
Remote Control Digital Display System Based on
Single Chip Microcomputer
ABSTRACT
In recent years, alarm detects more and more signal types and requires more
intelligence in order to meet the convenience of human life needs. Alarm can sense
infrared signal, ultrasonic signal, gravity signal, vibration signal and remote
control signals. This paper designs a safe, practical and convenient burglar alarm
on the analysis of several common alarm functions and the actual situation.
This paper describes the research and development of the alarm, the advantages
and the disadvantages of several different alarms and theirs popularity. The paper
also analyzes the detection principles and the physical mechanisms of the popular
alarms. And this paper chooses remote control signal, infrared signal and
temperature signal as the detection signals.
Infrared technology is a very mature technology and human eyes can not see
infrared light. It can be used under different weather conditions with good
concealment, and strong anti-interference ability. This kind of anti-theft alarm
system is widely used in homes, offices and other occasions. This design uses
infrared signal as a detection signal.
Temperature signal is most commonly used in daily life and used in most warning
systems. Particularly, temperature signal is an essential signal in the fire alarm
device. Temperature signal is one of the most intuitive parameters in the specific
environment. It can be monitored to judge the spot situation in order to provide
the basis for subsequent operations.
Remote control technology is highly attention with the development of the
intelligent alarm. Remote control technology can control and monitor remote object.
Remote control technology can not only control remote alarm equipment, but also
monitor the basic situation of the terminal. It is used in alarm system because
of the maturity of such technology.
This anti-theft alarm system selects the remote control signal, the infrared
signal and the temperature signal as monitoring signals. Remote control signal
is used to remotely control the alarm on and off. The infrared signal and the
temperature signal were monitored at the same time after the opening of the alarm.
The alarm was triggered when any of these signal reach its threshold.
Keywords: alarm;remote control;infrared;temperature
I
目 录
第 1 章 绪 论 ..............................................................II
1.1 课题背景及研究意义 ..................................................1
1.2 遥控数显控制系统的发展概况 ..........................................1
1.3 本课题研究的主要内容 ................................................2
第 2 章 遥控数显控制系统的总结 ...............................................3
2.1 原理介绍 ............................................................3
2.2 每个模块简单介绍 .....................................................3
2.2.1 遥控器 .........................................................3
2.2.2 遥控接收器 .....................................................4
2.2.3 显示电路 .......................................................4
2.2.4 温度传感器 .....................................................4
第 3 章 遥控数显控制系统硬件设计 .............................................6
3.1 总硬件原理图 .........................................................6
3.2 传感器的选型和特点 ..................................................6
3.2.1 温度传感器的特点 ...............................................7
3.2.2 红外对管传感器的特点 ..........................................10
3.2.3 遥控传感器的特点 ..............................................12
3.3 单片机单元设计 .....................................................14
3.3.1 STC89C52 单片机介绍 ............................................14
3.3.2 单片机外围接口电路 ............................................17
3.3.3 报警条件设置 ..................................................19
3.4 报警及控制输出电路 .................................................19
3.5 显示电路 ...........................................................19
第 4 章 遥控数显控制系统的软件设计 ..........................................21
4.1 软件结构 ...........................................................21
4.2 软件设计程序 .......................................................21
4.2.1 主程序 ........................................................22
4.2.2 温度数据读取程序 ..............................................22
4.2.3 中断显示程序 ..................................................24
4.2.4 构成报警条件子程序 ............................................25
4.3 软件抗干扰措施 .....................................................26
剩余54页未读,继续阅读
资源评论
matlab大师
- 粉丝: 2434
- 资源: 9万+
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功