没有合适的资源?快使用搜索试试~ 我知道了~
基于单片机的可燃气监测报警控制系统的设计-毕业论文.doc
0 下载量 156 浏览量
2023-07-01
20:01:15
上传
评论
收藏 1.47MB DOC 举报
温馨提示
试读
45页
基于单片机的可燃气监测报警控制系统的设计-毕业论文.doc
资源推荐
资源详情
资源评论
毕业设计(论文)
题 目
基于单片机的可燃气体监测
报警控制系统的设计
系 (院)
专 业
班 级
学生姓名
学 号
指导教师
职 称
讲师
二〇一二年六月十八日
独 创 声 明
本人郑重声明:所呈交的毕业设计(论文),是本人在指导老师的指
导下,独立进行研究工作所取得的成果,成果不存在知识产权争议。尽
我所知,除文中已经注明引用的内容外,本设计(论文)不含任何其他
个人或集体已经发表或撰写过的作品成果。对本文的研究做出重要贡献
的个人和集体均已在文中以明确方式标明。
本声明的法律后果由本人承担。
作者签名:
二〇一二年六月一十八日
毕业设计(论文)使用授权声明
本人完全了解滨州学院关于收集、保存、使用毕业设计(论文)的
规定。
本人愿意按照学校要求提交学位论文的印刷本和电子版,同意学校
保存学位论文的印刷本和电子版,或采用影印、数字化或其它复制手段
保存设计(论文);同意学校在不以营利为目的的前提下,建立目录检
索与阅览服务系统,公布设计(论文)的部分或全部内容,允许他人依
法合理使用。
(保密论文在解密后遵守此规定)
作者签名:
二〇一二年六月一十八日
滨州学院本科毕业设计(论文)
基于单片机的可燃气体监测报警控制系统的设计
摘 要
本系统由 MQ-2 传感器、单片机 AT89C51、模数转换芯片 ADC0804、
LCD1602 液晶显示屏构成,其功能是监测环境中可燃气体的浓度,当浓
度达到设定的报警值时就会触发声光报警。本系统分为硬件设计和软件
设计两部分。其中硬件设计部分包括气体浓度采集电路,A/D 转换电路、
单片机最小系统电路、显示电路、报警电路以及按键电路。当系统工作
时,信号采集电路将气体浓度转换为模拟电压,通过 ADC 换器器转换
为数字信号送入单片机,单片机内部建立浓度与电压的关系,然后将结
果送入 LCD 进行显示。如果可燃气体的浓度达到报警值时会触发声光
报警,同时无线控制模块触动阀门打开排气扇。当发生未知危险时还可
手动进行报警以及手动取消报警。软件部分通过 KEILC51 编程实现,通
过 PROTEUS 仿真,系统实现了预期的功能。
关键词:MQ-2 传感器;AT89C51 单片机;ADC0804 芯片;LCD 液晶
显示; 无线发射接收模块
滨州学院本科毕业设计(论文)
Design of Ignitable Gas Alarm Detector and Controller
Based on MCU
Abstract
The system consists of MQ-2 sensor, the single chip microcomputer
AT89C51 analog to digital converter chip, the ADC0804, the LCD1602. Its
function is to monitor the concentration of combustible gases in the
environment, when the concentration reaches the alarm set value, the system
will trigger sound and light alarm. The system is divided into hardware and
software. Hardware consist of the acquisition circuit of the gas concentration,
the A / D conversion circuit, the smallest system of AT89C51, circuit,
display circuit, the alarm circuit and the key circuit. When the system is
working, the signal acquisition circuit convert the gas concentration to
analog voltage, then the analog voltage is converted by ADC converter
device to digital signal and then send into the microcontroller, The cpu
establish the relationship between concentration and voltage, then the result
is dispiayed by 1602LCD .If the combustible gas concentration reaches the
alarm set value, the system will trigger sound and light alarm, at the same
time RF transceiver /receiver module touches the valve to open the exhaust
fan.When an unknown risk happen, the system can also control to open the
function of manually alarm and manually cancel the alarm. The
programming is implemented by KEIL C51, and the system is simulated by
PROTEUS. System achieved the desired function.
Key word: MQ-2 sensor
;
AT89C51
;
ADC0804
;
LCD
;
RF transceiver /
receiver module
剩余44页未读,继续阅读
资源评论
matlab大师
- 粉丝: 2441
- 资源: 9万+
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功