/*++ BUILD Version: 0013 // Increment this if a change has global effects
Copyright 1990 - 1998 Microsoft Corporation
Module Name:
winioctl.h
Abstract:
This module defines the 32-Bit Windows Device I/O control codes.
Revision History:
--*/
#ifndef _WINIOCTL_
#define _WINIOCTL_
#ifndef _DEVIOCTL_
#define _DEVIOCTL_
// begin_ntddk begin_wdm begin_nthal begin_ntifs
//
// Define the various device type values. Note that values used by Microsoft
// Corporation are in the range 0-32767, and 32768-65535 are reserved for use
// by customers.
//
#define DEVICE_TYPE DWORD
#define FILE_DEVICE_BEEP 0x00000001
#define FILE_DEVICE_CD_ROM 0x00000002
#define FILE_DEVICE_CD_ROM_FILE_SYSTEM 0x00000003
#define FILE_DEVICE_CONTROLLER 0x00000004
#define FILE_DEVICE_DATALINK 0x00000005
#define FILE_DEVICE_DFS 0x00000006
#define FILE_DEVICE_DISK 0x00000007
#define FILE_DEVICE_DISK_FILE_SYSTEM 0x00000008
#define FILE_DEVICE_FILE_SYSTEM 0x00000009
#define FILE_DEVICE_INPORT_PORT 0x0000000a
#define FILE_DEVICE_KEYBOARD 0x0000000b
#define FILE_DEVICE_MAILSLOT 0x0000000c
#define FILE_DEVICE_MIDI_IN 0x0000000d
#define FILE_DEVICE_MIDI_OUT 0x0000000e
#define FILE_DEVICE_MOUSE 0x0000000f
#define FILE_DEVICE_MULTI_UNC_PROVIDER 0x00000010
#define FILE_DEVICE_NAMED_PIPE 0x00000011
#define FILE_DEVICE_NETWORK 0x00000012
#define FILE_DEVICE_NETWORK_BROWSER 0x00000013
#define FILE_DEVICE_NETWORK_FILE_SYSTEM 0x00000014
#define FILE_DEVICE_NULL 0x00000015
#define FILE_DEVICE_PARALLEL_PORT 0x00000016
#define FILE_DEVICE_PHYSICAL_NETCARD 0x00000017
#define FILE_DEVICE_PRINTER 0x00000018
#define FILE_DEVICE_SCANNER 0x00000019
#define FILE_DEVICE_SERIAL_MOUSE_PORT 0x0000001a
#define FILE_DEVICE_SERIAL_PORT 0x0000001b
#define FILE_DEVICE_SCREEN 0x0000001c
#define FILE_DEVICE_SOUND 0x0000001d
#define FILE_DEVICE_STREAMS 0x0000001e
#define FILE_DEVICE_TAPE 0x0000001f
#define FILE_DEVICE_TAPE_FILE_SYSTEM 0x00000020
#define FILE_DEVICE_TRANSPORT 0x00000021
#define FILE_DEVICE_UNKNOWN 0x00000022
#define FILE_DEVICE_VIDEO 0x00000023
#define FILE_DEVICE_VIRTUAL_DISK 0x00000024
#define FILE_DEVICE_WAVE_IN 0x00000025
#define FILE_DEVICE_WAVE_OUT 0x00000026
#define FILE_DEVICE_8042_PORT 0x00000027
#define FILE_DEVICE_NETWORK_REDIRECTOR 0x00000028
#define FILE_DEVICE_BATTERY 0x00000029
#define FILE_DEVICE_BUS_EXTENDER 0x0000002a
#define FILE_DEVICE_MODEM 0x0000002b
#define FILE_DEVICE_VDM 0x0000002c
#define FILE_DEVICE_MASS_STORAGE 0x0000002d
#define FILE_DEVICE_SMB 0x0000002e
#define FILE_DEVICE_KS 0x0000002f
#define FILE_DEVICE_CHANGER 0x00000030
#define FILE_DEVICE_SMARTCARD 0x00000031
#define FILE_DEVICE_ACPI 0x00000032
#define FILE_DEVICE_DVD 0x00000033
#define FILE_DEVICE_FULLSCREEN_VIDEO 0x00000034
#define FILE_DEVICE_DFS_FILE_SYSTEM 0x00000035
#define FILE_DEVICE_DFS_VOLUME 0x00000036
//
// Macro definition for defining IOCTL and FSCTL function control codes. Note
// that function codes 0-2047 are reserved for Microsoft Corporation, and
// 2048-4095 are reserved for customers.
//
#define CTL_CODE( DeviceType, Function, Method, Access ) ( \
((DeviceType) << 16) | ((Access) << 14) | ((Function) << 2) | (Method) \
)
//
// Define the method codes for how buffers are passed for I/O and FS controls
//
#define METHOD_BUFFERED 0
#define METHOD_IN_DIRECT 1
#define METHOD_OUT_DIRECT 2
#define METHOD_NEITHER 3
//
// Define the access check value for any access
//
//
// The FILE_READ_ACCESS and FILE_WRITE_ACCESS constants are also defined in
// ntioapi.h as FILE_READ_DATA and FILE_WRITE_DATA. The values for these
// constants *MUST* always be in sync.
//
#define FILE_ANY_ACCESS 0
#define FILE_READ_ACCESS ( 0x0001 ) // file & pipe
#define FILE_WRITE_ACCESS ( 0x0002 ) // file & pipe
// end_ntddk end_wdm end_nthal end_ntifs
#endif // _DEVIOCTL_
#ifndef _NTDDSTOR_H_
#define _NTDDSTOR_H_
#ifdef __cplusplus
extern "C" {
#endif
//
// IoControlCode values for storage devices
//
#define IOCTL_STORAGE_BASE FILE_DEVICE_MASS_STORAGE
//
// The following device control codes are common for all class drivers. They
// should be used in place of the older IOCTL_DISK, IOCTL_CDROM and IOCTL_TAPE
// common codes
//
#define IOCTL_STORAGE_CHECK_VERIFY CTL_CODE(IOCTL_STORAGE_BASE, 0x0200, METHOD_BUFFERED, FILE_READ_ACCESS)
#define IOCTL_STORAGE_MEDIA_REMOVAL CTL_CODE(IOCTL_STORAGE_BASE, 0x0201, METHOD_BUFFERED, FILE_READ_ACCESS)
#define IOCTL_STORAGE_EJECT_MEDIA CTL_CODE(IOCTL_STORAGE_BASE, 0x0202, METHOD_BUFFERED, FILE_READ_ACCESS)
#define IOCTL_STORAGE_LOAD_MEDIA CTL_CODE(IOCTL_STORAGE_BASE, 0x0203, METHOD_BUFFERED, FILE_READ_ACCESS)
#define IOCTL_STORAGE_RESERVE CTL_CODE(IOCTL_STORAGE_BASE, 0x0204, METHOD_BUFFERED, FILE_READ_ACCESS)
#define IOCTL_STORAGE_RELEASE CTL_CODE(IOCTL_STORAGE_BASE, 0x0205, METHOD_BUFFERED, FILE_READ_ACCESS)
#define IOCTL_STORAGE_FIND_NEW_DEVICES CTL_CODE(IOCTL_STORAGE_BASE, 0x0206, METHOD_BUFFERED, FILE_READ_ACCESS)
#define IOCTL_STORAGE_GET_MEDIA_TYPES CTL_CODE(IOCTL_STORAGE_BASE, 0x0300, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_STORAGE_GET_MEDIA_TYPES_EX CTL_CODE(IOCTL_STORAGE_BASE, 0x0301, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_STORAGE_RESET_BUS CTL_CODE(IOCTL_STORAGE_BASE, 0x0400, METHOD_BUFFERED, FILE_READ_ACCESS)
#define IOCTL_STORAGE_RESET_DEVICE CTL_CODE(IOCTL_STORAGE_BASE, 0x0401, METHOD_BUFFERED, FILE_READ_ACCESS)
#define IOCTL_STORAGE_GET_DEVICE_NUMBER CTL_CODE(IOCTL_STORAGE_BASE, 0x0420, METHOD_BUFFERED, FILE_ANY_ACCESS)
//
// IOCTL_STORAGE_GET_DEVICE_NUMBER
//
// input - none
//
// output - STORAGE_DEVICE_NUMBER structure
// The values in the STORAGE_DEVICE_NUMBER structure are guaranteed
// to remain unchanged until the system is rebooted. They are not
// guaranteed to be persistant across boots.
//
typedef struct _STORAGE_DEVICE_NUMBER {
//
// The FILE_DEVICE_XXX type for this device.
//
DEVICE_TYPE DeviceType;
//
// The number of this device
//
DWORD DeviceNumber;
//
// If the device is partitionable, the partition number of the device.
// Otherwise -1
//
DWORD PartitionNumber;
} STORAGE_DEVICE_NUMBER, *PSTORAGE_DEVICE_NUMBER;
//
// Define the structures for scsi resets
//
typedef struct _STORAGE_BUS_RESET_REQUEST {
BYTE PathId;
} STORAGE_BUS_RESET_REQUEST, *PSTORAGE_BUS_RESET_REQUEST;
//
// IOCTL_STORAGE_MEDIA_REMOVAL disables the mechanism
// on a storage device that ejects media. This function
// may or may not be supported on storage devices that
// support removable media.
//
// TRUE means prevent media from being removed.
// FALSE means allow media removal.
//
typedef struct _PREVENT_MEDIA_REMOVAL {
BOOLEAN PreventMediaRemoval;
} PREVENT_MEDIA_REMOVAL, *PPREVENT_MEDIA_REMOVAL;
// begin_ntminitape
typedef struct _TAPE_STATISTICS {
DWORD Version;
DWORD Flags;
LARGE_INTEGER RecoveredWrites;
LARGE_INTEGER UnrecoveredWrites;
LARGE_INTEGER RecoveredReads;
LARGE_INTEGER UnrecoveredReads;
BYTE CompressionRatioReads;
BYTE CompressionRatioWrites;
} TAP