Proteus单片机仿真 万年历支持温度农历24节气显示+源程序 硬件开发 - 单片机.zip

#include <reg51.h> #include <absacc.h> #include <intrins.h> #include "lcd.h" #include "ds1302.h" #include "lcdshow.h" #include "key.h" bit CLKSTOP; uchar data count,temp,up_flag,down_flag,done; uint data year; /*********************************************/ sbit Set = P3^1; //模式切换键 sbit Up = P3^2; //加法按钮 sbit Down = P3^3; //减法按钮 sbit out = P3^4; //立刻跳出调整模式按钮 /*********************************************/ void mdelay(uint delay) { uint i; for(;delay>0;delay--) {for(i=0;i<62;i++) //1ms延时. {;} } } /*********************************************/ void setting() //选中后反白显示 { uchar i; switch(count) { case 1: //year r_ShowNumber(0,24,date_buf1[0]); r_ShowNumber(0,32,date_buf1[1]); i = date_buf[6]>>4; i &= 0x0f; r_ShowNumber(0,40,i); i = date_buf[6] & 0x0f; r_ShowNumber(0,48,i); break; case 2: //month show_date(); i = date_buf[4]>>4; i &= 0x01; r_ShowNumber(0,64,i); i = date_buf[4] & 0x0f; r_ShowNumber(0,72,i); break; case 3://day show_date(); i = date_buf[3]>>4; i &= 0x03; r_ShowNumber(0,88,i); i = date_buf[3] & 0x0f; r_ShowNumber(0,96,i); break; case 4://week i=date_buf[5]&0x0f; r_ShowChina(4,72,i); break; case 5://hour show_date(); i = date_buf[2]>>4; i &= 0x03; r_ShowNumber(2,16,i); i = date_buf[2] & 0x0f; r_ShowNumber(2,24,i); break; case 6://min show_time(); i = date_buf[1]>>4; i &= 0x07; r_ShowNumber(2,48,i); i = date_buf[1] & 0x0f; r_ShowNumber(2,56,i); break; case 7://sec show_time(); i = date_buf[0]>>4; i &= 0x07; r_ShowNumber(2,80,i); i = date_buf[0] & 0x0f; r_ShowNumber(2,88,i); break; default: show_date(); show_time(); break; } } void Setkey() { Set=1; if(Set==0) { mdelay(8); count=count+1; //Setkey按一次,count就加1 done=1; //进入调整模式 setting(); while(Set==0); //等待按键释放 } } void outkey() //跳出调整模式,返回默认显示 { uchar Second; if(out==0) { count=0; Second=read_all_1302(DS1302_SECOND); write_all_1302(0x8e,0x00); //写入允许 write_all_1302(0x80,Second&0x7f); write_all_1302(0x8E,0x80); //禁止写入 done=0; ClearScreen(1); ClearScreen(2); mdelay(2); show_date(); show_time(); show_hz(); show_temp(); while(out==0); //TR0=1; } } /***************************************************************************************************/ void addtime() { Up=1; if(Up==0) { mdelay(8); switch(count) { case 1: temp=read_all_1302(DS1302_YEAR); //读取年数 temp=temp+1; //年数加1 if((temp&0x0f)==0x0a) temp=(((temp>>4)&0x0f)+1)*16; up_flag=1; if(temp>0x85) temp=0; break; case 2: temp=read_all_1302(DS1302_MONTH); //读取月数 temp=temp+1; //月数加1 if (temp==0x0a) temp=0x10; up_flag=1; if(temp>0x12) temp=1; break; case 3: temp=read_all_1302(DS1302_DAY); //读取日数 temp=temp+1; //日数加1 if((temp&0x0f)==0x0a) temp=(((temp>>4)&0x0f)+1)*16; up_flag=1; if(temp>0x31) temp=1; break; case 4: temp=read_all_1302(DS1302_WEEK); //读取星期数 temp=temp+1; //星期数加1 if (temp==0x0a) temp=0x10; up_flag=1; if(temp>0x7) temp=1; break; case 5: temp=read_all_1302(DS1302_HOUR); //读取小时数 temp=temp+1; //小时数加1 if((temp&0x0f)==0x0a) temp=(((temp>>4)&0x0f)+1)*16; up_flag=1; if(temp>0x23) //超过23小时,清零 temp=0; break; case 6: temp=read_all_1302(DS1302_MINUTE); //读取分数 temp=temp+1; //分数加1 if((temp&0x0f)==0x0a) temp=(((temp>>4)&0x0f)+1)*16; up_flag=1; if(temp>0x59) //超过59分,清零 temp=0; break; case 7: temp=read_all_1302(DS1302_SECOND); //读取秒数 temp=temp+1; //秒数加1 if((temp&0x0f)==0x0a) temp=(((temp>>4)&0x0f)+1)*16; up_flag=1; //数据调整后更新标志 if((temp&0x7f)>0x59) //超过59秒,清零 temp=0; break; default:break; } while(Up==0); } // flag=1; } /***************************************************************************************************/ void subtime() { Down=1; if(Down==0) { mdelay(8); switch(count) { case 1: temp=read_all_1302(DS1302_YEAR); //读取年数 temp=temp-1; //年数减1 if(((temp&0x0f)==0x0f)&&(((temp>>4)&0x0f)>=0&&((temp>>4)&0x0f)<=8)) temp=temp&0x0f0+0x09; down_flag=1; if(temp==-1) temp=0x85; break; case 2: temp=read_all_1302(DS1302_MONTH); //读取月数 temp=temp-1; //月数减1 if(temp==0x0f) temp=0x09; down_flag=1; if(temp==0) temp=0x12; break; case 3: temp=read_all_1302(DS1302_DAY); //读取日数 temp=temp-1; //日数减1 if((temp&0x0f)==0x0f) temp=(((temp>>4)&0x0f))*16+9; down_flag=1; if(temp==0) temp=0x31; break; case 4: temp=read_all_1302(DS1302_WEEK); //读取星期数 temp=temp-1; //星期数减1 //if (temp==0x0f) temp=0x09; down_flag=1; if(temp==0) temp=0x7; break; case 5: temp=read_all_1302(DS1302_HOUR); //读取小时数 temp=temp-1; //小时数减1 if(((temp&0x0f)==0x0f)&&(((temp>>4)&0x0f)>=0&&((temp>>4)&0x0f)<=2)) temp=(((temp>>4)&0x0f)-1)*16+9; down_flag=1; if(temp==-1) temp=0x23; break; case 6: temp=read_all_1302(DS1302_MINUTE); //读取分数 temp=temp-1; //分数减1 if(((temp&0x0f)==0x0f)&&(((temp>>4)&0x0f)>=0&&((temp>>4)&0x0f)<=5)) temp=(((temp>>4)&0x0f))*16+9; down_flag=1; if(temp==-1) temp=0x59; //小于0秒,返回59秒 break; case 7: temp=read_all_1302(DS1302_SECOND); //读取秒数 temp=temp-1; //秒数减1 if(((temp&0x0f)==0x0f)&&(((temp>>4)&0x0f)>=0&&((temp>>4)&0x0f)<=5)) temp=(((temp>>4)&0x0f))*16+9; down_flag=1; //数据调整后更新标志 if(temp==0x7f) //小于0秒,返回59秒 temp=0x59; break; default:break; } while(Down==0); } // flag1=1; } /*****************************************************************************************/ void Deal_With_Time() { uchar second; if(CLKSTOP==0) //关闭时钟,停止计时 { write_all_1302(0x8e,0x00); //写入