BSI Standards Publication
Enterprise-control system
integration
Part 1: Models and terminology
BS EN 62264-1:2013
National foreword
This British Standard is the UK implementation of EN 62264-1:2013. It
is identical to IEC 62264-1:2013. It supersedes BS EN 62264-1:2008
which is withdrawn.
The UK participation in its preparation was entrusted to Technical Com-
mittee AMT/7, Industrial communications: process measurement and
control, including fieldbus.
A list of organizations represented on this committee can be obtained on
request to its secretary.
This publication does not purport to include all the necessary provisions of
a contract. Users are responsible for its correct application.
© The British Standards Institution 2013.
Published by BSI Standards Limited 2013
ISBN 978 0 580 76225 3
ICS 25.040.01; 35.240.50
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 31 October 2013.
Amendments/corrigenda issued since publication
Date Text affected
BRITISH STANDARD
BS EN 62264-1:2013
EUROPEAN STANDARD
EN 62264-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2013
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62264-1:2013 E
ICS 25.040; 35.240.50
Supersedes EN 62264-1:2008
English version
Enterprise-control system integration -
Part 1: Models and terminology
(IEC 62264-1:2013)
Intégration des systèmes entreprise-
contrôle
-
Partie 1: Modèles et terminologie
(CEI 62264-1:2013)
Integration von Unternehmensführungs-
und Leitsystemen
-
Teil 1: Modelle und Terminologie
(IEC 62264-1:2013)
This European Standard was approved by CENELEC on 2013-06-26. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
BS EN 62264-1:2013
EN 62264-1:2013 - 2 -
Foreword
The text of document 65E/285/FDIS, future edition 2 of IEC 62264-1, prepared by SC 65E "Devices and
integration in enterprise systems", of IEC/TC 65 "Industrial-process measurement, control and
automation", in co-operation with ISO/TC 184/SC5 "Interoperability, integration and architectures for
enterprise systems and automation applications" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 62264-1:2013.
The following dates are fixed:
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dop)
2014-03-26
• latest date by which the national
standards conflicting with the
document have to be withdrawn
(dow)
2016-06-26
This document supersedes EN 62264-1:2008.
EN 62264-1:2013 includes the following significant technical changes with respect to EN 62264-1:2008:
a) the functional hierarchy in 5.2 was extended using the definitions from EN 62264-3;
b) the equipment hierarchy in 5.3 was extended using the definitions from EN 62264-3;
c) a physical asset equipment model was added in 5.3;
d) the generic model of manufacturing operations management categories in Clause 7 was added using
information from EN 62264-3;
e) the formal UML models that were in Clause 7 were moved to EN 62264-2 and the remaining data
definitions are now in Clause 8;
f) the capacity and capability model in Clause 8 was extended;
g) a new Annex A was moved from EN 62264-3;
h) a new Annex B was moved from EN 62264-3;
i) subclause 5.5 on the decision hierarchy was removed and a reference added to ISO 15704 which is
now available;
j) old Annex C was removed and moved to a Technical Report;
k) old Annex D was removed and, moved to a Technical Report;
l) old Annex E was removed and moved to a Technical Report;
m) old Annex F was removed.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 62264-1:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61512 series
NOTE Harmonised in EN 61512 series.
BS EN 62264-1:2013
- 3 - EN 62264-1:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication
Year
Title
EN/HD
Year
IEC 61512-1
-
Batch control -
Part 1: Models and terminology
EN 61512-1
-
IEC 62264-2
-
Enterprise-control system integration -
Part 2: Object model attributes
EN 62264-2
-
IEC 62264-3
-
Enterprise-control system integration -
Part 3 Activity models of manufacturing
operations management
EN 62264-3
-
IEC 62264-5
-
Enterprise system integration -
Part 5: Business to manufacturing
transactions
EN 62264-5
-
ISO/IEC 19501
-
Information technology - Open Distributed
Processing
- Unified Modeling Language
(UML)
-
-
ISO 15704
-
Industrial automation systems - Requirements
for enterprise
-reference architectures and
methodologies
-
-
BS EN 62264-1:2013