FC-10GRev4.0资源-CSDN文库

FibreChannel

需积分: 5 4 浏览量 2024-01-10 14:39:36 上传评论收藏 1.5MB PDF 举报

资源推荐

资源详情

资源评论

Copies of this document may be purchased from: INCITS 364-2002

Global Engineering, 15 Inverness Way East, T11/Project 1413-D/Rev 4.0

Englewood, CO 80112-5704

Phone: (800) 854-7179 or (303) 792-2181 Fax: (303) 792-2192

FIBRE CHANNEL

10 Gigabit

(10GFC)

REV 4.0

INCITS working draft proposed

American National Standard

for Information Technology

April 1, 2004

Secretariat: Information Technology Industry Council

NOTE:

This is a working draft American National Standard of Accredited Standards Committee INCITS. As

such this is not a completed standard. The T11 Technical Committee or anyone else may modify

this document as a result of comments received anytime, or during a future public review and its

eventual approval as a Standard. Use of the information contained herein is at your own risk.

Permission is granted to members of INCITS, its technical committees, and their associated task

groups to reproduce this document for the purposes of INCITS standardization activities without

further permission, provided this notice is included. All other rights are reserved. Any duplication

of this document for commercial or for-profit use is strictly prohibited.

POINTS OF CONTACT:

Robert Snively (T11 Chair)

Brocade Communications Systems, Inc.

1745 Technology Drive

San Jose, CA 95110

Voice: (408) 487-8135

Fax: (408) 487-8101

EMail: rsnively@brocade.com

Curtis A. Ridgeway (Facilitator)

LSI Logic Corporation

1551 McCarthy Blvd.

Milpitas, CA 95035

Voice: (408) 433-7792

Fax: (408) 954-4764

E-mail: [email protected]

Edward Grivna (T11 Vice Chair)

Cypress Semiconductor

2401 East 86th Street

Bloomington, MN 55425

Voice: (612) 851-5046

Fax: (612) 851-5087

E-Mail: [email protected]

Richard Taborek Sr. (Technical Editor)

Tartan Technologies

Campbell, CA 95008

Voice: (408) 832-3957

Fax: (408) 374-3645

E-mail: rtaborek@earthlink.net

Project 1413-D, 10 Gigabit Fibre Channel, Rev 4.0, April 1, 2004

Release Notes for revision 0.1: Below is a summary of the work done to create this revision.

– None. First release of document as a template for accepted 10GFC proposals.

– Baseline proposals based on work in development in IEEE P802.3ae (10 Gigabit Ethernet stan-

dards project and document) will be directly referenced by 10GFC clauses in the interest of ex-

pediency and to prevent errors due to duplicate specifications. It is anticipated that the schedule

of the 10 GFC project will allow such direct reference and that the 802.3ae standard will be pub-

lished prior to the publication of the 10GFC document.

– It is anticipated that the 10GFC extensions to proposals being developed in IEEE P802.3ae will

be reserved as such in P802.3ae drafts as well as the published standard. Formal liaisons be-

tween INCITS T11 and IEEE 802.3 are currently in place and a formal request for 10GFC ex-

tension documentation in P802.3ae drafts is being drafted by the joint T11.2/T11.3 meeting

chair, Mr. Robert Snively, on behalf of the 10GFC project.

Release Notes for revision 1.0: Below is a summary of the work done to the prior revision (0.1) to cre-

ate this revision.

– Solicited and included contributions from clause editors.

– Added 8B/10B Clause 17 to describe the usage of 8B/10B physical coding and media attach-

ment associates with the XAUI and four lane physical variants.

– Added WIS Clause 22 per motion at the February, 2001 T11 10GFC meeting.

Release Notes for revision 1.1: Below is a summary of the work done to the prior revision (1.0) to cre-

ate this revision.

– Updated Clause 6, optical interface, 850 nm parallel (4-lane), per input from clause editors Du-

bravko Babic, Alvesta, and Deepak Patel, Stratos Lightwave.

– Updated Clause 8 per input from Len Young, Corning and Terry Cobb, Lucent.

– Updated Clause 9 per input from Michael Karg, Madison Cable and Ken Lazaris-Brunner, Gen-

num.

– Updated Clause 10 per input from Michael Karg, Madison Cable and Bob Thornton, Fujitsu.

– Deleted Clause 11, Loopback mode, as being too general per discussion at the April, 2001

10GFC meeting. This clause was essentially identical to the corresponding clause in FC-PH.

– Deleted Clause 12, Diagnostic mode, as being too general per discussion at the April, 2001

10GFC meeting. This clause was essentially identical to the corresponding clause in FC-PH.

– Deleted Clause 13, Transmitter safety, as being too general per discussion at the April, 2001

10GFC meeting. This clause was essentially identical to the corresponding clause in FC-PH.

– Updated Clause 17 per input from Osamu Ishida, NTT.

Release Notes for revision 1.9: Below is a summary of the work done to the prior revision (1.1) to cre-

ate this revision.

– Updated subclause 6.1, Optical Interface, 850 nm parallel (4-lane), and per input from clause

editors Dubravko Babic, Alvesta, and Tom Lindsay, Stratos Lightwave.

– Updated subclause 6.3, Optical Interface, 850 nm CWDM (4-lane), and per input from clause

editors Bill Weidemann, Blaze Network Products.

– Updated Clause 8 and Annex A, Optical Cable Plant, per input from Len Young, Corning.

– Updated Clause 11, Ordered Sets per input from Craig Stuber, JNI and Curt Ridgeway, LSI

Logic.

– Updated Clause 17, Link Signaling Sublayer, per input from Osamu Ishida, NTT.

Release Notes for revision 1.91: Below is a summary of the work done to the prior revision (1.9) to

create this revision.

– Updated subclause 7, Optical Interface Receptacle Specification, per input from clause editor

Kevin White, USConnec. Inadvertently left out of revision 1.9.

– Updated Clause 8 to insert missing figure 41.

Project 1413-D, 10 Gigabit Fibre Channel, Rev 4.0, April 1, 2004

iii

Release Notes for revision 1.99: Below is a summary of the work done to the prior revision (1.91) to

create this revision.

– Updated clauses with resolution of T11.2 and T11.3 letter ballot comments to revision 1.1

Release Notes for revision 2.0: Below is a summary of the work done to the prior revision (1.99) to

create this revision.

– Updated clauses with resolution of T11.2 and T11.3 letter ballot comments to revision 1.1;

– Deleted Electrical interface specification clause (9) per December, 2001 T11 motion;

– Deleted Electrical cable and connector specification clause (10) per December, 2001 T11 mo-

tion;

– Renamed Ordered Set clause (11) to FC-1;

– Deleted Link signaling sublayer (LSS) clause (17) per December, 2001 T11 motion;

– Deleted WAN interface sublayer (WIS) clause (19) per December, 2001 T11 motion.

Release Notes for revision 2.1: Updated clauses with resolution of T11 letter ballot comments to revi-

sion 2.0;

Release Notes for revision 3.0: Updated clauses with further resolution of T11 letter ballot comments

to revision 2.0;

Release Notes for revision 3.1:

– Corrected front matter for First Public Review;

– Changed all NCITS to INCITS;

– Changed Ed Grivna to Edward Grivna on cover to match Foreword;

– Filled out T11 membership list in Foreword;

– Deleted empty T11.2 membership list in Foreword;

– Deleted empty T11.3 membership list in Foreword;

– Deleted update needed note at the beginning of the Introduction section;

– Added Doug Coleman to clause editors list in Introduction;

– Corrected inadvertent red table text in clause 8 to black;

– Added the following text to the end of 4.2.2 to address Agilent additional comment issue #1: “Ar-

bitrated loop functions defined in FC-AL-2 are not supported and outside the scope of this spec-

ification. Potential FC-AL-2 ordered set mapping, translations and related topics are provided in

annex C for future reference.”

– Updated Cover point of contact information.

Release Notes for revision 3.2:

– Resolution of INCITS First Public Review comments;

– Editor correction of spelling, grammar and document style.

Release Notes for revision 3.3:

– Resolution of INCITS Second Public Review comments:

– Changed all FC-PH references ANSI X3.230:1994 to ANSI INCITS 230-1994 (1999);

– Changed all FC-AL-2 references ANSI INCITS 332:1999 to ANSI INCITS 332-1999;

– Changed all FC-PI references ANSI INCITS 352:200x to ANSI INCITS 352-2002 and moved

listing to Approved References;

– Aligned all cross references to 10GbE to “10GbE [12]”;

– Changed the nomenclature for the first three PMDs listed at the beginning of Clause 6 to “1200-

MX-…” as M5 refers distinctly to 50 micron, whereas these PMD descriptions are intended to be

more general here;

– Changed PMD reference in 6.1.5.3 to 10GASE-LX4 as 10GBASE-SR does not specify jitter;

– Changed PMD all references in 6.1.5.4 to 10GASE-LX4 as 10GBASE-SR does not specify jit-

ter;

– Changed the 10GbE referenced test at the end of 6.1.5.3 to “Stressed receiver conformance

test”;

Project 1413-D, 10 Gigabit Fibre Channel, Rev 4.0, April 1, 2004

– Modified the current revision level of the reference document to TIA-568B in 6.1.7.3;

– Deleted the last sentence in 6.3.5 as Rx specs are in OMA;

– Changed Table 16, column 50µm MF 2000 MHz•km, row: Stressed Rx sensitivity to 64,0 (-11,9)

µW (dBm) (per T11/02-506v2);

– Changed Table 16, column 50µm MF 2000 MHz•km, row: Vertical eye closure penalty to 2,3 dB

(per T11/02-506v2);

– Inserted “OMA” into the row descriptors for Rx sensitivity and Stressed Rx sensitivity in Table

16;

– Changed the last sentence in 6.5.2 to read: “For 10GFC system testing that requires a long or

mixed pattern, the test pattern defined in Annex E should be used; for component testing, test

pattern(s) defined for 10GBASE-LX4 in 10GbE [12] or in Annex E may be used as appropri-

ate.”;

– Deleted the first sentence in 8.2.2 as this subclause is relevant to all PMDs, not just the one in

the first sentence;

– Replaced text in 8.2.2 inadvertently deleted during the resolution of First Public Review com-

ments;

– Delete the second sentence of the second paragraph of 8.3.1. This sentence was no longer

quite true, as the loss budget is based on nominal wavelength, but the other values are based

on worst-case wavelength;

– Changed Table 18, column: 1200-M5-SN4P-I, row: Channel insertion loss to 2,0 dB (per

T11/02-505v1);

– Changed Table 18, column: 1200-SM-LL-L, row: Allocation for penalties to 3,4 dB (per T11/02-

504v1);

– Changed Table 19, column: 1200-M5E-SN4-I, row: Allocation for penalties to 3,7 dB (per

T11/02-505v1);

– Changed Table 19, column: 1200-M5E-SN4-I, row: Additional insertion loss allowed to 0,3 dB

(per T11/02-505v1);

– Changed Table 19, column: 1200-SM-LC4-L, row: Allocation for penalties to 2,0 dB (per

T11/02-506v2);

– Changed Table 19, column: 1200-SM-LC4-L, row: Additional insertion loss allowed to 0,0 dB

(per T11/02-506v2);

– Changed Table A.1, column: 1200-M6-SN-I, row: Allocation for penalties to 4,5 dB (per T11/02-

504v1);

– Changed Table A.1, column: 1200-SM-LL-L, row: Allocation for penalties to 3,3 dB (per T11/02-

504v1);

– Changed Table A.1, column: 1200-M6-SN4P-I, row: Additional insertion loss allowed to 0,0 dB

(per T11/02-505v1);

– Changed Table A.2, column: 1200-M5E-SN4-I, row: Allocation for penalties to 3,2 dB (per

T11/02-506v2);

– Changed Table A.2, column: 1200-M5E-SN4-I, row: Additional allowable insertion loss to 0,0

dB (per T11/02-506v2);

– Changed Table A.2, column: 1200-M5-LC4-L, row: Allocation for penalties to 4,5 dB (per

T11/02-506v2);

– Changed Table A.2, column: 1200-M5-LC4-L, row: Additional allowable insertion loss to 0,2 dB

(per T11/02-506v2);

– Changed Table A.2, column: 1200-M6-LC4-L, row: Additional allowable insertion loss to 0,1 dB

(per T11/02-506v2);

– Changed Table A.2, column: 1200-SM-LC4-L, row: Allocation for penalties to 2,0 dB (per

T11/02-506v2);

– Changed “Operating Wavelength” to “Nominal Operating Wavelength” in Tables 18, 19, A.1 and

A.2;

– Changed “Channel Insertion Loss (dB)” to “Channel Insertion Loss (dB) at Nominal Operating

Wavelength” via footnote in Tables 18, 19, A.1 and A.2;

Project 1413-D, 10 Gigabit Fibre Channel, Rev 4.0, April 1, 2004

– Inserted the word “nominal” in front of “operating wavelength” for all occurrences in Note 5 in

Tables 18, 19, A.1 and A.2;

– Added “/10GFC Level” to the end of the label “(Ethernet Reconciliation Sublayer)” in Figure 9;

– Modified the wording of 9.4.1 based on proposed modifications in Brocade comments docu-

mented in T11/02-763v0;

– Modified the wording of 9.4.2 based on proposed modifications in Brocade comments docu-

mented in T11/02-763v0;

– Deleted Table 23 - Primitive signals (arbitrated loop) per proposed modifications in Brocade

comments documented in T11/02-763v0;

– Deleted Table 25 - Primitive sequences (arbitrated loop) per proposed modifications in Brocade

comments documented in T11/02-763v0;

– Changed “XGMII” to “10GFC” in 9.4.3 based on proposed modifications in Brocade comments

documented in T11/02-763v0;

– Changed the cross reference in the second to last paragraph in 9.6 to 9.7.2 based on proposed

modifications in Brocade comments documented in T11/02-763v0;

– Modified the wording of 9.7.2 based on proposed modifications in Brocade comments docu-

mented in T11/02-763v0;

– Changed “This” to “The 10GFC” in 9.8.2 based on proposed modifications in Brocade com-

ments documented in T11/02-763v0;

– Modified the wording of 9.8.3 based on proposed modifications in Brocade comments docu-

mented in T11/02-763v0;

– Modified the wording of 9.8.5 based on proposed modifications in Brocade comments docu-

mented in T11/02-763v0;

– Changed “FC-1” to “10GFC” in 9.8.7.2 based on proposed modifications in Brocade comments

documented in T11/02-763v0;

– Deleted one extraneous “D0.0” for the 8B/10B encodings for Ordered Sets Local_Fault and

Remote_Fault;

– Modified the wording of the beginning of Annex C based on proposed modifications in Brocade

comments documented in T11/02-763v0;

– Added C.4 to Annex C based on proposed modifications in Brocade comments documented in

T11/02-763v0;

– Replace two instances of “will” in the last sentence of E.4 to “may” as it is unknown for certain

that IDLEs will flip disparity.

Release Notes for revision 3.4:

– Corrected cross reference in 9.3 to Table 30 from Table 38;

– Changed all variables “10GbE [12]” to direct cross references reading “10GbE [13]”;

– In the last sentence of 8.3, changed the value of 1,7 dB to 2,0 dB.

Release Notes for revision 3.5:

– Resolved 2PR comment #29 from Tom Lindsay by inserting figure into Clause 7 showing fiber

lane ordering and transmit and receive lane ordering for MPO connector.

Release Notes for revision 4.0:

– Resolved 3PR comments.

剩余109页未读，继续阅读

评论收藏

内容反馈

FPGA_Darren

粉丝: 3
资源: 33

FC-10G Rev4.0

最新资源

FC-10G Rev4.0

Fibre Channel –Physical Interface-7 (FC-PI-7)Rev 0.04 -2017

(FC-PI-7) Fibre Channel –Physical Interface-7 (FC-PI-7)Rev 0.04

CCNA 4--final exam v4.0

Gigabyte技嘉GA-F2A55M-HD2(rev.3.0)主板BIOS驱动程序FC版

fc-ae-asm协议（光纤通道航空环境）

FC-AE-1553协议标准

Z97-HD3-f10c，rev2.1

FC-AE-ASM协议.pdf

FC-PI-5协议

基于FC-BB-3-GFPT的光纤通道长距传送方案

FC-621GB-J

FC-FS-4(Fibre Channel Framing and Signaling - 4).pdf

FC-AE-1553协议的命令帧，数据帧和状态帧格式说明

HCIA-Cloud Computing V4.0 PC安装FusionCompute指导手册.pptx

FC-PI-4 Rev7.0

FC-PH-3 Rev9.1

GA-F2A55M-DS2 (rev. 1.0) BIOS: F7c

FC-AL-2 Rev5.4

FC-PH-2 Rev7.4

Origin绘制相关性热图插件(Correlation Plot)

（免费）Chrome浏览器插件axure-chrome-extension

vep视频快速加密提取器

2011-2022年北大数字普惠金融指数数据（包括省市县）.zip

最新版YS9082HC主控开卡工具 YS9082HC-MPToolV8.00.00.18.826-HCS1A25E2023062

noc指导教师资格认证题库

糖尿病数据集diabetes.csv（免费）

IEEE 802.11be（WiFi7） 协议原文pdf文档

Mann -kendall突变检验的MATLAB代码

Axhub Charts Pro V2.1.1.rplib

最新资源

IEEE 802.11be（WiFi7）协议原文pdf文档