File: APPNOTE.TXT - .ZIP File Format Specification
Version: 6.3.2
Revised: September 28, 2007
Copyright (c) 1989 - 2007 PKWARE Inc., All Rights Reserved.
The use of certain technological aspects disclosed in the current
APPNOTE is available pursuant to the below section entitled
"Incorporating PKWARE Proprietary Technology into Your Product".
I. Purpose
----------
This specification is intended to define a cross-platform,
interoperable file storage and transfer format. Since its
first publication in 1989, PKWARE has remained committed to
ensuring the interoperability of the .ZIP file format through
publication and maintenance of this specification. We trust that
all .ZIP compatible vendors and application developers that have
adopted and benefited from this format will share and support
this commitment to interoperability.
II. Contacting PKWARE
---------------------
PKWARE, Inc.
648 N. Plankinton Avenue, Suite 220
Milwaukee, WI 53203
+1-414-289-9788
+1-414-289-9789 FAX
zipformat@pkware.com
III. Disclaimer
---------------
Although PKWARE will attempt to supply current and accurate
information relating to its file formats, algorithms, and the
subject programs, the possibility of error or omission cannot
be eliminated. PKWARE therefore expressly disclaims any warranty
that the information contained in the associated materials relating
to the subject programs and/or the format of the files created or
accessed by the subject programs and/or the algorithms used by
the subject programs, or any other matter, is current, correct or
accurate as delivered. Any risk of damage due to any possible
inaccurate information is assumed by the user of the information.
Furthermore, the information relating to the subject programs
and/or the file formats created or accessed by the subject
programs and/or the algorithms used by the subject programs is
subject to change without notice.
If the version of this file is marked as a NOTIFICATION OF CHANGE,
the content defines an Early Feature Specification (EFS) change
to the .ZIP file format that may be subject to modification prior
to publication of the Final Feature Specification (FFS). This
document may also contain information on Planned Feature
Specifications (PFS) defining recognized future extensions.
IV. Change Log
--------------
Version Change Description Date
------- ------------------ ----------
5.2 -Single Password Symmetric Encryption 06/02/2003
storage
6.1.0 -Smartcard compatibility 01/20/2004
-Documentation on certificate storage
6.2.0 -Introduction of Central Directory 04/26/2004
Encryption for encrypting metadata
-Added OS/X to Version Made By values
6.2.1 -Added Extra Field placeholder for 04/01/2005
POSZIP using ID 0x4690
-Clarified size field on
"zip64 end of central directory record"
6.2.2 -Documented Final Feature Specification 01/06/2006
for Strong Encryption
-Clarifications and typographical
corrections
6.3.0 -Added tape positioning storage 09/29/2006
parameters
-Expanded list of supported hash algorithms
-Expanded list of supported compression
algorithms
-Expanded list of supported encryption
algorithms
-Added option for Unicode filename
storage
-Clarifications for consistent use
of Data Descriptor records
-Added additional "Extra Field"
definitions
6.3.1 -Corrected standard hash values for 04/11/2007
SHA-256/384/512
6.3.2 -Added compression method 97 09/28/2007
-Documented InfoZIP "Extra Field"
values for UTF-8 file name and
file comment storage
V. General Format of a .ZIP file
--------------------------------
Files stored in arbitrary order. Large .ZIP files can span multiple
volumes or be split into user-defined segment sizes. All values
are stored in little-endian byte order unless otherwise specified.
Overall .ZIP file format:
[local file header 1]
[file data 1]
[data descriptor 1]
.
.
.
[local file header n]
[file data n]
[data descriptor n]
[archive decryption header]
[archive extra data record]
[central directory]
[zip64 end of central directory record]
[zip64 end of central directory locator]
[end of central directory record]
A. Local file header:
local file header signature 4 bytes (0x04034b50)
version needed to extract 2 bytes
general purpose bit flag 2 bytes
compression method 2 bytes
last mod file time 2 bytes
last mod file date 2 bytes
crc-32 4 bytes
compressed size 4 bytes
uncompressed size 4 bytes
file name length 2 bytes
extra field length 2 bytes
file name (variable size)
extra field (variable size)
B. File data
Immediately following the local header for a file
is the compressed or stored data for the file.
The series of [local file header][file data][data
descriptor] repeats for each file in the .ZIP archive.
C. Data descriptor:
crc-32 4 bytes
compressed size 4 bytes
uncompressed size 4 bytes
This descriptor exists only if bit 3 of the general
purpose bit flag is set (see below). It is byte aligned
and immediately follows the last byte of compressed data.
This descriptor is used only when it was not possible to
seek in the output .ZIP file, e.g., when the output .ZIP file
was standard output or a non-seekable device. For ZIP64(tm) format
archives, the compressed and uncompressed sizes are 8 bytes each.
When compressing files, compressed and uncompressed sizes
should be stored in ZIP64 format (as 8 byte values) when a
files size exceeds 0xFFFFFFFF. However ZIP64 format may be
used regardless of the size of a file. When extracting, if
the zip64 extended information extra field is present for
the file the compressed and uncompressed sizes will be 8
byte values.
Although not originally assigned a signature, the value
0x08074b50 has commonly been adopted as a signature value
for the data descriptor record. Implementers should be
aware that ZIP files may be encountered with or without this
signature marking data descriptors and should account for
either case when reading ZIP files to ensure compatibility.
When writing ZIP files, it is recommended to include the
signature value marking the data descriptor record. When
the signature is used, the fields currently defined for
the data descriptor record will immediately follow the
signature.
An extensible data descriptor will be released in a future
version of this APPNOTE. This new record is intended to
resolve conflicts with the use of this record going forward,
and to provide better support for streamed file processing.
When the Central Directory Encryption method is used, the data
descriptor record is not required, but may be used. If present,
and bit 3 of the gener
没有合适的资源?快使用搜索试试~ 我知道了~
温馨提示
本资源为基于SSM框架的毕业设计管理系统的设计与实现。 本系统采用B/S模式,主要开发工具为Eclipse(Oxygen.1a Release),用到的编程语言有Java、JavaScript和JSP,数据库采用MySQL 5.7,服务器则用的Apache Tomcat 9.0。前端页面的编写基于bootstrap,整个项目基于SSM框架。
资源推荐
资源详情
资源评论
收起资源包目录
毕业设计管理系统源码 (4852个子文件)
africa 45KB
antarctica 15KB
asia 111KB
australasia 68KB
backward 4KB
TeacherController.class 46KB
StudentController.class 31KB
AdminContraller.class 20KB
TeacherServiceImpl.class 17KB
StudentServiceImpl.class 12KB
Student.class 8KB
IStudentDaoTest.class 8KB
ITeacherDaoTest.class 7KB
UserController.class 5KB
StudentTaskBookOpening.class 4KB
ITeacherService.class 3KB
IUserDaoTest.class 3KB
ThesisTitle.class 3KB
IThesisTitleDaoTest.class 3KB
Teacher.class 3KB
TeacherProgress.class 3KB
TeacherTaskBookOpening.class 3KB
LoginFilter.class 3KB
IStudentService.class 2KB
IStudentTaskBookOpeningDao.class 2KB
Announcement.class 2KB
ThesisInformation.class 2KB
ITopicDaoTest.class 2KB
DepartmentContraller.class 2KB
MajorContraller.class 2KB
Topic.class 2KB
StudentScore.class 1KB
Doubt.class 1KB
User.class 1KB
UserServiceImpl.class 1KB
AnnouncementServiceImpl.class 1KB
StudentProgress.class 1KB
ThesisPaper.class 1KB
DepartmentServiceImpl.class 1KB
Major.class 1KB
MajorServiceImpl.class 1KB
Zhiyuan.class 1KB
ITeacherTaskBookOpeningDao.class 1KB
Department.class 1KB
ITeacherDao.class 940B
IStudentDao.class 936B
IThesisTitleDao.class 579B
BaseTest.class 558B
IUserDao.class 481B
IThesisInformationDao.class 461B
ITeacherProgressDao.class 426B
IZhiyuanDao.class 387B
ITopicDao.class 375B
IAnnouncementService.class 354B
IAnnouncementDao.class 342B
IDepartmentService.class 338B
IUserService.class 329B
IDepartmentDao.class 326B
IMajorService.class 318B
IMajorDao.class 309B
IThesisPaperDao.class 292B
IDoubtDao.class 287B
IStudentScoreDao.class 276B
IStudentProgressDao.class 130B
.classpath 1KB
教师.cld 50KB
教师.cld 50KB
学生.cld 45KB
学生.cld 45KB
管理员.cld 45KB
管理员.cld 45KB
CNAME 14B
gauge.coffee 14KB
morris.grid.coffee 14KB
morris.line.coffee 12KB
line_spec.coffee 8KB
label_series_spec.coffee 7KB
set_data_spec.coffee 7KB
morris.bar.coffee 7KB
morris.donut.coffee 6KB
bar_spec.coffee 4KB
donut_spec.coffee 3KB
hover_spec.coffee 2KB
area_spec.coffee 2KB
parse_time_spec.coffee 2KB
morris.area.coffee 2KB
starrr.coffee 2KB
karma.conf.coffee 1KB
colours.coffee 1KB
commas_spec.coffee 1KB
auto_grid_lines_spec.coffee 1KB
morris.hover.coffee 1KB
morris.coffee 1006B
Gruntfile.coffee 669B
pad_spec.coffee 588B
y_label_format_spec.coffee 443B
placeholder.coffee 162B
org.eclipse.wst.common.component 668B
configure 248B
org.eclipse.wst.jsdt.ui.superType.container 49B
共 4852 条
- 1
- 2
- 3
- 4
- 5
- 6
- 49
资源评论
- 底层初学者2020-12-21代码思路有的,就是导入总会有些毛病,总的来说还是不错的,要是包括论文更好了
年少遗梦oo
- 粉丝: 351
- 资源: 4
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功