宇宙风软件

/* Copyright (c) 2000 Cypress Semiconductor Corporation Module Name: CyIoclt.h Additional Notes: THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE. */ #ifndef __IOCTL_H__ #define __IOCTL_H__ #ifndef DRIVER #ifndef CTL_CODE #include <devioctl.h> #endif #ifndef BM_REQUEST_TYPE #include <usb200.h> #endif #include <PSHPACK1.H> #define DIR_HOST_TO_DEVICE 0 #define DIR_DEVICE_TO_HOST 1 #define DEVICE_SPEED_UNKNOWN 0x00000000 #define DEVICE_SPEED_LOW_FULL 0x00000001 #define DEVICE_SPEED_HIGH 0x00000002 typedef struct _WORD_SPLIT { UCHAR lowByte; UCHAR hiByte; } WORD_SPLIT, *PWORD_SPLIT; typedef struct _BM_REQ_TYPE { UCHAR Recipient:2; UCHAR Reserved:3; UCHAR Type:2; UCHAR Direction:1; } BM_REQ_TYPE, *PBM_REQ_TYPE; typedef struct _SETUP_PACKET { union { BM_REQ_TYPE bmReqType; UCHAR bmRequest; }; UCHAR bRequest; union { WORD_SPLIT wVal; USHORT wValue; }; union { WORD_SPLIT wIndx; USHORT wIndex; }; union { WORD_SPLIT wLen; USHORT wLength; }; ULONG ulTimeOut; } SETUP_PACKET, *PSETUP_PACKET; #define USB_ISO_ID 0x4945 #define USB_ISO_CMD_ASAP 0x8000 #define USB_ISO_CMD_CURRENT_FRAME 0x8001 #define USB_ISO_CMD_SET_FRAME 0x8002 typedef struct _ISO_ADV_PARAMS { USHORT isoId; USHORT isoCmd; ULONG ulParam1; ULONG ulParam2; } ISO_ADV_PARAMS, *PISO_ADV_PARAMS; typedef struct _ISO_PACKET_INFO { ULONG Status; ULONG Length; } ISO_PACKET_INFO, *PISO_PACKET_INFO; typedef struct _SINGLE_TRANSFER { union { SETUP_PACKET SetupPacket; ISO_ADV_PARAMS IsoParams; }; UCHAR reserved; UCHAR ucEndpointAddress; ULONG NtStatus; ULONG UsbdStatus; ULONG IsoPacketOffset; ULONG IsoPacketLength; ULONG BufferOffset; ULONG BufferLength; } SINGLE_TRANSFER, *PSINGLE_TRANSFER; #endif // #ifndef DRIVER typedef struct _SET_TRANSFER_SIZE_INFO { UCHAR EndpointAddress; ULONG TransferSize; } SET_TRANSFER_SIZE_INFO, *PSET_TRANSFER_SIZE_INFO; // // Macro to extract function out of the device io control code // #ifdef WIN_98_DDK #define DEVICE_TYPE_FROM_CTL_CODE(ctrlCode) (((ULONG)(ctrlCode & 0xffff0000)) >> 16) #endif #define FUNCTION_FROM_CTL_CODE(ctrlCode) (((ULONG)(ctrlCode & 0x00003FFC)) >> 2) #define ACCESS_FROM_CTL_CODE(ctrlCode) (((ULONG)(ctrlCode & 0x000C0000)) >> 14) #define METHOD_FROM_CTL_CODE(ctrlCode) (((ULONG)(ctrlCode & 0x00000003))) #define IOCTL_ADAPT_INDEX 0x0000 // Get the driver version #define IOCTL_ADAPT_GET_DRIVER_VERSION CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX, METHOD_BUFFERED, FILE_ANY_ACCESS) // Get the current USBDI version #define IOCTL_ADAPT_GET_USBDI_VERSION CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+1, METHOD_BUFFERED, FILE_ANY_ACCESS) // Get the current device alt interface settings from driver #define IOCTL_ADAPT_GET_ALT_INTERFACE_SETTING CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+2, METHOD_BUFFERED, FILE_ANY_ACCESS) // Set the device interface and alt interface setting #define IOCTL_ADAPT_SELECT_INTERFACE CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+3, METHOD_BUFFERED, FILE_ANY_ACCESS) // Get device address from driver #define IOCTL_ADAPT_GET_ADDRESS CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+4, METHOD_BUFFERED, FILE_ANY_ACCESS) // Get number of endpoints for current interface and alt interface setting from driver #define IOCTL_ADAPT_GET_NUMBER_ENDPOINTS CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+5, METHOD_BUFFERED, FILE_ANY_ACCESS) // Get the current device power state #define IOCTL_ADAPT_GET_DEVICE_POWER_STATE CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+6, METHOD_BUFFERED, FILE_ANY_ACCESS) // Set the device power state #define IOCTL_ADAPT_SET_DEVICE_POWER_STATE CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+7, METHOD_BUFFERED, FILE_ANY_ACCESS) // Send a raw packet to endpoint 0 #define IOCTL_ADAPT_SEND_EP0_CONTROL_TRANSFER CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+8, METHOD_BUFFERED, FILE_ANY_ACCESS) // Send/receive data to/from nonep0 #define IOCTL_ADAPT_SEND_NON_EP0_TRANSFER CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+9, METHOD_BUFFERED, FILE_ANY_ACCESS) // Simulate a disconnect/reconnect #define IOCTL_ADAPT_CYCLE_PORT CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+10, METHOD_BUFFERED, FILE_ANY_ACCESS) // Reset the pipe #define IOCTL_ADAPT_RESET_PIPE CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+11, METHOD_BUFFERED, FILE_ANY_ACCESS) // Reset the device #define IOCTL_ADAPT_RESET_PARENT_PORT CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+12, METHOD_BUFFERED, FILE_ANY_ACCESS) // Get the current transfer size of an endpoint (in number of bytes) #define IOCTL_ADAPT_GET_TRANSFER_SIZE CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+13, METHOD_BUFFERED, FILE_ANY_ACCESS) // Set the transfer size of an endpoint (in number of bytes) #define IOCTL_ADAPT_SET_TRANSFER_SIZE CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+14, METHOD_BUFFERED, FILE_ANY_ACCESS) // Return the name of the device #define IOCTL_ADAPT_GET_DEVICE_NAME CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+15, METHOD_BUFFERED, FILE_ANY_ACCESS) // Return the "Friendly Name" of the device #define IOCTL_ADAPT_GET_FRIENDLY_NAME CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+16, METHOD_BUFFERED, FILE_ANY_ACCESS) // Abort all outstanding transfers on the pipe #define IOCTL_ADAPT_ABORT_PIPE CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+17, METHOD_BUFFERED, FILE_ANY_ACCESS) // Send/receive data to/from nonep0 w/ direct buffer acccess (no buffering) #define IOCTL_ADAPT_SEND_NON_EP0_DIRECT CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+18, METHOD_NEITHER, FILE_ANY_ACCESS) // Return device speed #define IOCTL_ADAPT_GET_DEVICE_SPEED CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+19, METHOD_BUFFERED, FILE_ANY_ACCESS) // Get the current USB frame number #define IOCTL_ADAPT_GET_CURRENT_FRAME CTL_CODE(FILE_DEVICE_UNKNOWN, IOCTL_ADAPT_INDEX+20, METHOD_BUFFERED, FILE_ANY_ACCESS) #define NUMBER_OF_ADAPT_IOCTLS 21 // Last IOCTL_ADAPT_INDEX + 1 #include <POPPACK.H> #endif // __IOCTL_H__