download:
AT firmware which can upgrade by "AT+CIUPDATE"
boot_v1.2+.bin 0x00000
user1.1024.new.2.bin 0x01000
blank.bin 0x7e000 & 0xfe000
or
AT firmware which can not upgrade by "AT+CIUPDATE", but fit in 4Mbit flash
eagle.flash.bin 0x00000
eagle.irom0text.bin 0x40000
blank.bin 0x3e000 & 0x7e000
*NOTICE*:
1.If you use Esp Flash Download Tool, please MAKE SURE to choose FLASH SIZE to 8Mbit.
2.UPDATE is not supported in non-boot mode
Update steps
1.Make sure TE(terminal equipment) is in sta or sta+ap mode
ex. AT+CWMODE=3
OK
AT+RST
2.Make sure TE got ip address
ex. AT+CWJAP="ssid","12345678"
OK
AT+CIFSR
192.168.1.134
3.Let's update
ex. AT+CIUPDATE
+CIPUPDATE:1 found server
+CIPUPDATE:2 connect server
+CIPUPDATE:3 got edition
+CIPUPDATE:4 start start
OK
note. If there are mistakes in the updating, then break update and print ERROR.
esp8266-01接DHT11实现读取温湿度
需积分: 49 150 浏览量
2019-03-06
11:17:59
上传
评论 2
收藏 12.93MB RAR 举报
esp8266-01接DHT11实现读取温湿度 （127个子文件） 
libssl.a 400KB liblwip.a 312KB liblwip_536.a 312KB libnet80211.a 221KB libwps.a 220KB libpp.a 211KB libat.a 204KB libdriver.a 179KB libmain.a 148KB libphy.a 145KB libmesh.a 128KB libwpa.a 125KB libsmartconfig.a 108KB libcrypto.a 55KB libespnow.a 30KB libpwm.a 28KB libupgrade.a 23KB libjson.a 13KB libuser.a 9KB gen_misc.bat 3KB user1.1024.new.2.bin 255KB user2.1024.new.2.bin 255KB eagle.irom0text.bin 218KB eagle.irom0text.bin 168KB eagle.flash.bin 32KB eagle.flash.bin 27KB blank.bin 4KB esp_init_data_default.bin 128B eagle.flash.bin_rep 27KB uart.c 27KB spi.c 17KB spi_overlap.c 14KB i2c_master.c 10KB key.c 6KB dht.c 5KB hw_timer.c 4KB gpio16.c 1KB user_main.c 1KB .cproject 5KB spi.d 1KB user_main.d 1KB spi_overlap.d 1KB dht.d 1KB key.d 1KB uart.d 1KB i2c_master.d 1020B hw_timer.d 1010B gpio16.d 980B eagle.dump 1.61MB
xxd.exe 69KB espconn.h 26KB user_interface.h 11KB eagle_soc.h 11KB spi_register.h 7KB uart_register.h 7KB queue.h 7KB uart.h 6KB jsontree.h 5KB at_custom.h 4KB jsonparse.h 3KB gpio.h 3KB json.h 3KB c_types.h 2KB ets_sys.h 2KB ip_addr.h 2KB i2c_master.h 2KB sntp.h 2KB spi_overlap.h 2KB spi.h 1KB upgrade.h 1KB osapi.h 1KB espnow.h 1KB pwm.h 894B spi_flash.h 870B ping.h 733B key.h 616B smartconfig.h 598B dht.h 381B os_type.h 352B mem.h 263B gpio16.h 188B user_config.h 66B eagle.rom.addr.v6.ld 15KB eagle.app.v6.old.1024.app2.ld 5KB eagle.app.v6.old.1024.app1.ld 5KB eagle.app.v6.new.512.app2.ld 5KB eagle.app.v6.old.512.app2.ld 5KB eagle.app.v6.ld 5KB eagle.app.v6.old.512.app1.ld 5KB eagle.app.v6.new.1024.app2.ld 5KB eagle.app.v6.new.2048.ld 5KB eagle.app.v6.new.512.app1.ld 5KB eagle.app.v6.new.1024.app1.ld 5KB Makefile 10KB Makefile 3KB Makefile 1KB Makefile 1KB uart.o 66KB spi_overlap.o 32KB i2c_master.o 21KB共 127 条
- 1
- 2
资源评论
