Keil.STM32F1xx_DFP.2.1.0.pack

STMicroelectronics STM32F1 Series Device Support, Drivers and Examples Version: 2.1.0 Keil.STM32F1xx_DFP.2.1.0.pack Updated CMSIS drivers: EMAC: Improved robustness by function checking that driver is powered (EMAC_FLAG_POWER) CAN: Corrected functionality when only one CAN controller is used Corrected pin remap configuration for CAN2 port pins Corrected functionality when NULL pointer is provided for one or both signal callbacks in Initialize function USB Device: Corrected Isochronous transfer Corrected IN Endpoint FIFO flush procedure USB Host: Removed interrupt priority handling Corrected multiple packet sending Corrected PowerControl function for unconditional Power Off USART: Corrected Peripheral Reset and Clock enable/disable (check if peripheral is available on selected device) Corrected CTS handling and added signal CTS change event. SPI: Corrected Peripheral Reset and Clock enable/disable (check if peripheral is available on selected device) Corrected Bus Speed configuration Corrected 8bit/16bit Data register access, regarding the Data frame size -I2C: Corrected invalid __I2C_DMA field in I2C_DMA_TxEvent and I2C_DMA_RxEvent functions Updated/added examples: Added examples using Network DualStack (IPv4/IPv6) Middleware targeting MCBSTM32C (Keil.MDK-Middleware.7.0.0.pack required) Updated emWin examples to emWin V5.32 Updated CAN examples Updated USB Host examples Updated USB Device CDC ACM VirtualCOM examples Updated RTE_Device.h: Corrected USART Pin configuration Added trace configuration to the debug description and updated Quick Start Guide