GNS3-0.8.2网络虚拟软件 （linux）

Dynagen README Version 0.11.1.091203 For documentation, refer to the tutorial in the docs directory, and the sample network files in the sample_labs directory. To see usage examples for all options, refer to the "all_config_options.txt" file in the sample_labs directory. Also be sure to visit the Dynamips web site at http://www.ipflow.utc.fr/index.php/Cisco_7200_Simulator. This version of Dynagen requires at least version 0.2.8-RC1 of Dynamips. The Windows installer package requires at least Windows XP SP2. For earlier versions of Windows, replace the Dynamips binary with the Windows 2000 version as described in the Dynagen FAQ section of the tutorial. Known Issues ============ * "save" and "idlepc save" commands may reformat the indentation of your network file and add an explicit "model" definition in the router section * Gig interfaces on the NPE-G2 cannot currently be used. Changelog ========= Version 0.11.1.091203 * "delay" option added to dynagen.ini. Allows you to globally set the default delay between device startups. * Added a progress bar which is displayed during the delay between device startups. * Sync with GNS3, which includes: - Some ghosting changes made by Pavel - Unicode support - Quick JIT blocks sharing support - Allows use of "monitor" filter provided by dynamips - Pavel's automatic unused slot removal Version 0.11.0 * Merge of the features of confDynagen (dynamic reconfiguration, pemu support, and many other features). Big thanks to Pavel Skovajsa for performing the merge work and other significant contributions. * Addition of a pemu server for Cisco PIX emulation. Thanks to Thomas Pani for writing the wrapper, and to mmm123 for writing pemu. NOTE: A Pemu instance will always consume 100% of a CPU core. There is no "idlepc". Use a tool like BES (Windows) or cpulimit (Linux) if you wish to reduce CPU usage. * Could not specify a model of 1751 or 1760 in a router definition * WIC interfaces on 1751s and 1760s could not be used * On Windows platforms, Network Device list changes to the temp dir before executing Dynamips (helps Vista users). * Added a delay option to start /all. This introduces a pause between starting devices. * Filter command was broken in 0.10.x * FS#217 - fixed the connect method for switches. Only effected 3rd party developers using the library, Dynagen does not use these methods. * FS#211 - Dynagen crash when specifying invalid port * 7200 instances now default to using an NPE-400 rather than an NPE-200. This is because the C7200-IO-2FE is not compatible with the NPE-200 and this was causing confusion. You can override this new behavior with "npe = NPE-200". * Referencing f0/0 or f0/1 with 7200s now automatically inserts a C7200-IO-2FE in slot 0 rather than a C7200-IO-FE. You can override this behavior by specifying "slot0=PA-C7200-IO-FE". * Support for ATM to Ethernet bridge introduced in Dynamips 0.2.8-RC2. Provision using ATMBR. * idlemax issue fixed (see http://7200emu.hacki.at/viewtopic.php?p=13676) * Resolves crash when invalid port specified on adapter (http://7200emu.hacki.at/viewtopic.php?p=15685) * Dynagen now warns if a router does not have an image set * The prefix "PA-" for the 7200 IO adapters is optional (i.e. "PA-C7200-IO-2FE" or "C7200-IO-2FE"). * Multisever config with two instances on the same system no longer requires use of the UDP configuration option workaround. * The adapter "PA-4T+" should now be specified as "PA-4T+". "PA-4T" is still supported so as not to break compatibility with existing labs. * Added a "start-pemu.sh" script to launch pemuwrapper, writing temp files to a temp directory. To be used on Linux systems. * Throws a warning for the infamous "using localhost with multiserver" misconfiguration. * Change of base udp port for pemuwrapper to 40000 so that we do not conflict with vpc * "idlepc show" now shows the current idlepc value if one has already been applied * idlepc commands now warn that pemu instances are not supported * Added "ghostsize" command to dynamic configuration mode * Ignores GNS3-DATA section. Caution: Issuing a "copy run start" from inside of Dynagen will obliterate this section. Version 0.10.1 * Accidentally only gave the NM-16ESW 15 interfaces. Version 0.10.0 * Support for the 1700 platform new to Dynamips 0.8.0-RC1. See the tutorial for supported platforms and modules. * Support for WIC-1T, WIC-2T, and WIC-1ENET. See the tutorial for supported router platforms and usage. * Support for NM-CIDS and NM-NAM. Note these are just "stubs" (at least as of this version of Dynamips). You can connect to them using "IDS-Sensorx/0 = ..." or "Analysis-Modulex/0 = ..." but they don't actually do anything. See the tutorial for platform support. * FS#154 - added "confreg" command to set the configuration register of router(s) from Dynagen. e.g. "confreg r1 0x2142" followed by "reload r1". Note changes to the config register will not be displayed in a "show ver" until the router is reloaded. * FS#182 - Second port of PA-C7200-IO-2FE was not usable * FS#177 - crash on malformed interface entry in net file * Dynagen now automatically picks a PA-2FE-TX rather than a PA-FE-TX when referencing a FastEthernet on ports 1-6 on a 7200. You can override this to mimic the old behavior with "slotx = PA-FE-TX". * the vbs file that launches SecureCRT sessions was missing from the Windows installer package * Changed the state shown with the "list" command for virtual switches from "n/a" to "always on" to avoid confusion. * Added an up-to-date list of hardware emulated by Dynamips to the tutorial. Thanks to ggee for performing the initial documentation in this post: http://7200emu.hacki.at/viewtopic.php?t=1831 Version 0.9.3 * No longer prints a warning for unused switchports * Added "MAC" option to set base MAC address of a router. See all_config_options.txt for usage. * Eliminated unnecessary Leopard-2FE insertion on 3660s resulting in "a NM already exists in slot 0" warnings from Dynamips. * Fix bug that caused crash when trying to capture packets on an unconnected interface * Dynamips temp files are now written to the user's temp dir rather than \Program Files\Dynamips. Might make it work better under Vista. * Dynagen allows POS to frame-relay switch connections. But there seems to be a bug in dynamips 0.2.7 that prevents it from functioning. * Console entries in dynagen.ini for use with iTerm on OS X and SecureCRT on Windows. The SecureCRT one is a little glitchy but generally works. * Entering "no ?" caused a crash * Including a new Network Device list script for Windows that includes interface descriptions in the output contributed by Volker Semken. Version 0.9.2 * Fixed required version string * Removed false warning message when autostart is used at the router level * Added some info and fixed some misspellings in all_config_options.txt * Added the console command. It is identical to the telnet command. It occurred to me that "telnet" is a misleading command since a connection to the console is actually being made. But you can use which ever one you prefer, and you can abbreviate "console" as "con" if you wish. Version 0.9.1 * added "oldidle" option for use in network files. Setting this to true allows you to use pre-0.2.7-RC2 idlepc values. This disables direct jumps between JIT blocks (new to 0.2.7 RC2). Use this a the top level of your network file, or in the defaults or specific router definition. * sparsemem was misspelled in all_config_options.txt * Built-in motherboard Ethernet/fastethernet interfaces now are automatically created on 2600 platforms. * Improved checking for attempts to insert network modules into unsupported slots, and the error now indicates the offending router name. * I totally neglected to include the 2611XM. Sorry 2611XM! * 2621, 2621XM, and 2651XM mistakenly only got one integrated FE instead of two. * Could not use gigabit adapters prop