/**
******************************************************************************
* @file stm32f4xx_hal_tim.c
* @author MCD Application Team
* @version V1.5.2
* @date 22-September-2016
* @brief TIM HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Timer (TIM) peripheral:
* + Time Base Initialization
* + Time Base Start
* + Time Base Start Interruption
* + Time Base Start DMA
* + Time Output Compare/PWM Initialization
* + Time Output Compare/PWM Channel Configuration
* + Time Output Compare/PWM Start
* + Time Output Compare/PWM Start Interruption
* + Time Output Compare/PWM Start DMA
* + Time Input Capture Initialization
* + Time Input Capture Channel Configuration
* + Time Input Capture Start
* + Time Input Capture Start Interruption
* + Time Input Capture Start DMA
* + Time One Pulse Initialization
* + Time One Pulse Channel Configuration
* + Time One Pulse Start
* + Time Encoder Interface Initialization
* + Time Encoder Interface Start
* + Time Encoder Interface Start Interruption
* + Time Encoder Interface Start DMA
* + Commutation Event configuration with Interruption and DMA
* + Time OCRef clear configuration
* + Time External Clock configuration
@verbatim
==============================================================================
##### TIMER Generic features #####
==============================================================================
[..] The Timer features include:
(#) 16-bit up, down, up/down auto-reload counter.
(#) 16-bit programmable prescaler allowing dividing (also on the fly) the
counter clock frequency either by any factor between 1 and 65536.
(#) Up to 4 independent channels for:
(++) Input Capture
(++) Output Compare
(++) PWM generation (Edge and Center-aligned Mode)
(++) One-pulse mode output
##### How to use this driver #####
==============================================================================
[..]
(#) Initialize the TIM low level resources by implementing the following functions
depending from feature used :
(++) Time Base : HAL_TIM_Base_MspInit()
(++) Input Capture : HAL_TIM_IC_MspInit()
(++) Output Compare : HAL_TIM_OC_MspInit()
(++) PWM generation : HAL_TIM_PWM_MspInit()
(++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
(++) Encoder mode output : HAL_TIM_Encoder_MspInit()
(#) Initialize the TIM low level resources :
(##) Enable the TIM interface clock using __TIMx_CLK_ENABLE();
(##) TIM pins configuration
(+++) Enable the clock for the TIM GPIOs using the following function:
__GPIOx_CLK_ENABLE();
(+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
(#) The external Clock can be configured, if needed (the default clock is the
internal clock from the APBx), using the following function:
HAL_TIM_ConfigClockSource, the clock configuration should be done before
any start function.
(#) Configure the TIM in the desired functioning mode using one of the
initialization function of this driver:
(++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
(++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
Output Compare signal.
(++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
PWM signal.
(++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
external signal.
(++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
in One Pulse Mode.
(++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
(#) Activate the TIM peripheral using one of the start functions depending from the feature used:
(++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
(++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
(++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
(++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
(++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
(++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
(#) The DMA Burst is managed with the two following functions:
HAL_TIM_DMABurst_WriteStart()
HAL_TIM_DMABurst_ReadStart()
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup TIM TIM
* @brief TIM HAL module driver
* @{
*/
#ifdef HAL_TIM_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @addtogroup TIM_Private_Functions
* @{
*/
/* Private function prototypes -----------------------------------------------*/
static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
static void TIM_OC3_SetConf
没有合适的资源?快使用搜索试试~ 我知道了~
USB_CDC_TEST.7z
共277个文件
h:102个
c:57个
xcl:43个
4星 · 超过85%的资源 需积分: 9 24 下载量 42 浏览量
2017-05-04
21:11:45
上传
评论 2
收藏 2.63MB 7Z 举报
温馨提示
此代码支持STM32F1,STM32F0,STM32F4..等USB IP核。
资源推荐
资源详情
资源评论
收起资源包目录
USB_CDC_TEST.7z (277个子文件)
STM32F072_USB_CDC_Test.STM32F072_USB_CDC_Test.cspy.bat 2KB
F407_CDC_Test.F407_CDC_Test.cspy.bat 2KB
stm32f4xx_hal_tim.c 176KB
stm32f0xx_hal_tim.c 166KB
stm32f0xx_hal_i2c.c 159KB
stm32f4xx_hal_rcc_ex.c 112KB
stm32f4xx_hal_tim_ex.c 67KB
stm32f0xx_hal_tim_ex.c 67KB
stm32f4xx_hal_flash_ex.c 52KB
stm32f4xx_ll_usb.c 51KB
stm32f0xx_hal_rcc.c 50KB
stm32f4xx_hal_rcc.c 43KB
stm32f4xx_hal_dma.c 41KB
stm32f0xx_hal_pcd.c 39KB
stm32f4xx_hal_pcd.c 38KB
stm32f0xx_hal_rcc_ex.c 37KB
stm32f0xx_hal_flash_ex.c 33KB
usbd_cdc.c 29KB
usbd_cdc.c 29KB
stm32f0xx_hal_dma.c 29KB
system_stm32f4xx.c 28KB
stm32f4xx_hal_pwr_ex.c 25KB
stm32f4xx_hal_flash.c 25KB
stm32f0xx_hal_flash.c 22KB
stm32f4xx_hal_pwr.c 21KB
usbd_conf.c 21KB
stm32f4xx_hal_gpio.c 20KB
stm32f0xx_hal_gpio.c 20KB
stm32f4xx_hal_cortex.c 19KB
stm32f4xx_hal.c 18KB
stm32f0xx_hal_pwr.c 18KB
usbd_ctlreq.c 18KB
usbd_ctlreq.c 18KB
usbd_conf.c 16KB
stm32f0xx_hal.c 15KB
stm32f0xx_hal_cortex.c 13KB
system_stm32f0xx.c 13KB
usbd_core.c 12KB
usbd_core.c 12KB
stm32f4xx_hal_dma_ex.c 12KB
stm32f0xx_hal_i2c_ex.c 11KB
usbd_desc.c 11KB
stm32f4xx_hal_pcd_ex.c 11KB
stm32f0xx_hal_pwr_ex.c 10KB
usbd_cdc_if.c 10KB
usbd_desc.c 10KB
usbd_cdc_if.c 10KB
main.c 7KB
stm32f4xx_hal_flash_ramfunc.c 7KB
main.c 7KB
stm32f4xx_it.c 6KB
usbd_ioreq.c 6KB
usbd_ioreq.c 6KB
stm32f0xx_hal_pcd_ex.c 6KB
stm32f0xx_it.c 5KB
stm32f4xx_hal_msp.c 4KB
stm32f0xx_hal_msp.c 3KB
usb_device.c 3KB
usb_device.c 3KB
F407_CDC_Test.crun 351B
STM32F072_USB_CDC_Test.crun 351B
F407_CDC_Test.dbgdt 11KB
STM32F072_USB_CDC_Test.dbgdt 9KB
STM32F072_USB_CDC_Test.dep 27KB
F407_CDC_Test.dep 23KB
F407_CDC_Test.dni 3KB
STM32F072_USB_CDC_Test.dni 668B
STM32F072_USB_CDC_Test.ewd 44KB
F407_CDC_Test.ewd 44KB
STM32F072_USB_CDC_Test.ewp 30KB
F407_CDC_Test.ewp 30KB
F407_CDC_Test.ewt 69KB
STM32F072_USB_CDC_Test.ewt 69KB
Project.eww 166B
Project.eww 157B
stm32f072xb.h 941KB
stm32f407xx.h 556KB
stm32f4xx_hal_rcc_ex.h 395KB
arm_math.h 246KB
arm_math.h 246KB
stm32_hal_legacy.h 174KB
stm32_hal_legacy.h 172KB
core_cm7.h 136KB
core_cm7.h 136KB
core_cm4.h 112KB
core_cm4.h 112KB
core_cm3.h 101KB
core_cm3.h 101KB
core_sc300.h 100KB
core_sc300.h 100KB
stm32f0xx_hal_rcc_ex.h 94KB
stm32f0xx_hal_rcc.h 84KB
stm32f0xx_hal_tim.h 82KB
stm32f4xx_hal_gpio_ex.h 74KB
stm32f4xx_hal_tim.h 74KB
stm32f4xx_hal_rcc.h 72KB
stm32f4xx_hal_flash_ex.h 60KB
stm32f0xx_hal_dma_ex.h 59KB
cmsis_armcc_V6.h 54KB
cmsis_armcc_V6.h 54KB
共 277 条
- 1
- 2
- 3
资源评论
- yao34562018-10-24不错很好用的资料
- fallowmen2017-08-29usb device的资源,我要的是host的资源。
flydream0
- 粉丝: 1733
- 资源: 21
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功