下载  >  行业  >  制造  > 康耐视相机说明书

康耐视相机说明书 评分

康耐视相机说明书,IS7000系列智能相机。
Legal Notices The software described in this document is furnished under license, and may be used or copied only in accordance with the terms of such license and with the inclusion of the copyright notice shown on this page. Neither the software, this document, nor any copies thereof may be provided to, or otherwise made available to, anyone other than the licensee Title to and ownership of, this software remains with Cognex Corporation or its licensor Cognex Corporation assumes no responsibility for the use or reliability of its software on equipment that is not supplied by Cognex Corporation Cognex Corporation makes no warranties, either express or implied, regarding the described software, its merchantability, non-infringement or its fitness for any particular purpose The information in this document is subject to change without notice and should not be construed as a commitment by Cognex Corporation Cognex Corporation is not responsible for any errors that may be present in either this document or the associated software Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, nor transferred to any other media or language without the written permission of Cognex corporation Cognex P/N 597-0138-01 Rev C Copyright o 2011-2013 Cognex Corporation. All Rights reserved Portions of the hardware and software provided by Cognex may be covered by one or more of the U.s. and foreign patents listed below as well as pending U.S. and foreign patents. Such pending U.S. and foreign patents issued after the dateofthisdocumentarelistedontheCognexwebsiteat:http://www.cognex.com/patents 5481712,5742037,5751853,5845007,5909504,5943441,5949905,5960125,5978080,5978081,6005978 6137893,6141033,6154567,6215915,6301396,6327393,6381375,6408109,6457032,6490600,6563324, 6658145,6690842,6771808,6804416,6836567,6850646,6856698,6859907,6920241,6941026,6959112, 6963338,6975764,6985625,6993192,7006712,7016539,7043081,7058225,7065262,7069499,7088862 7107519,7164796,7175090,7181066,7251366,7720315,JP3927239 Cognex, In-Sight, Easy Builder, Vision View, Data Man and dvt are registered trademarks of cognex Corporation The Cognex logo, SmartLink, Edge Count, Feature Count, and Objectlocate are trademarks of Cognex Corporation Windows is a registered trademark or trademark of microsoft Corporation in the United states and other countries. other product and company trademarks identified herein are the trademarks of their respective owners COGNEX Regulations/Conformity Note: For the most up-to-date regulations and conformity information, please refer to the In-Sight online support site http://www.cognex.com/support/insight. Declaration of Conformity Manufacturer Cognex Corporation One vision drive Natick, MA 01760 USA Declares this CEmarked Machine Vision System Product Product In-Sight 7010/7010C/7020/7050: Regulatory Model 1AAA In-Sight 7200/7200C/7210/7230: Regulatory Model 1AAA In-Sight 7400/7400C/7410/7430: Regulatory Model 1AAA In-Sight 7402/7402C/7412/7432: Regulatory Model 1AAA Complies With 2004/108/EC Electromagnetic Compatibility Directive Compliance EN 55022: 2006+A1: 2007 Class A Standards EN610006-2:2005 EN61000-3-2:2006+A1:2009+A2:2009 EN61000-3-3:2008 European COGNEX INTERNATIONAL Representative Immeuble "Le Patio 104 Avenue albert ler 92563 Rueil malmaison cedex.france Safety and regulatory FCC FCC Part 15. class a This device complies with Part 15 of the FCc Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference; and (2)this device must accept any interference received, including interference that may cause undesired operation This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense KCC In-Sight 7010/7010C/7020/7050: Regulatory Model 1AAA KCC-REM-CGX-1AAA In-Sight 7200/7200C/7210/7230: Regulatory Model 1AAA KCC-REM-CGX-1AAA In-Sight 7400/7400C/7410/7430: Regulatory Model 1AAA KCC-REM-CGX-1AAA In-Sight 7402/7402C/7412/7432: Regulatory Model 1AAA KCC-REM-CGX-1AAA NRTL TUV SUD AM SCC/NRTL OSHA Scheme for UL/CAN 60950-1 Regulatory model 1AAA CB TUV SUD AM, IEC/EN 60950-1 CB report available upon request RoHS RoHS 6 Compliant COGNEX Precautions Observe these precautions when installing the vision system to reduce the risk of injury or equipment damage The In-Sight vision system is intended to be supplied by a UL or nrtL listed power supply with a 24VDC output rated for at least 2A continuous and a maximum short circuit current rating of less than 8a and a maximum power rating of less than 100VA and marked Class 2 or Limited Power Source(LPS). Any other voltage creates a risk of fire or shock and can damage the components. Applicable national and local wiring standards and rules must be followed According to lEC 62471, the white ring light is in Risk Group 1; it is not recommended to stare directly into the illumination LEDs when the vision system is receiving power. According to lec 62471, the blue ring light is in Risk Group 2; CAUTIoN-Possibly hazardous optical radiation emitted from this product. Do not stare at operating light. May be harmful to the eyes. the green ring light, the red ring light and the Infrared (r)ring light are Exempt Group products therefore no precautions are required Do not install In-Sight vision systems where they are directly exposed to environmental hazards such as excessive heat, dust, moisture humidity, impact, vibration, corrosive substances, flammable substances, or static electricity To reduce the risk of damage or malfunction due to over-voltage, line noise, electrostatic discharge(ESD), power surges, or other irregularities in the power supply, route all cables and wires away from high-voltage power sources Do not expose the image sensor to laser light; image sensors can be damaged by direct, or reflected, laser light If your application requires the use of laser light that may strike the image sensor, a lens filter at the corresponding lasers wavelength is recommended. Contact your local integrator or application engineer for suggestions The In-Sight vision system does not contain user-serviceable parts Do not make electrical or mechanical modifications to In-Sight vision system components. Unauthorized modifications may void your warranty Changes or modifications not expressly approved by the party responsible for regulatory compliance could void the users authority to operate the equipment Service loops should be included with all cable connections Cable shielding can be degraded or cables can be damaged or wear out more quickly if a bend radius or service oop is tighter than 10X the cable diameter Class a Equipment (broadcasting and communication equipment for office work): Seller and user shall be notified that this equipment is suitable for electromagnetic equipment for office work class a)and can be used outside the home . This device should be used in accordance with the instructions in this manual COGNEX Table of contents Legal Notices Regulations/Conformity Precautions Introduction St Standard components Cables 2 Ethernet cable Light Cable Power and l/o breakout cable 2 Installation 3 Connectors and Indicators Install the Lens(C-Mount Lens Configuration) Mount the Vision system Working Distance and Field of view 1 Connect the Light Cable(Optional) Connect the ethernet cable Connect the power and i/o Breakout cable 10 Specifications 11 Vision System Specifications 1/O Specifications 13 Acquisition Trigger Input General-Purpose Inputs 14 High-Speed Outputs 16 RS-232 Receive and transmit 18 RS-232 Connector Configuration 18 Light Connecto 19 Ethernet Cable Specifications Light Cable Specifications 21 Power and l/o Breakout cable specifications Vision System Dimensions 23 Appendix A-Cleaning/Maintenance 27 Clean the Vision System Housing 27 Clean the Vision System Image Sensor Window(C-Mount Lens Configuration 27 Appendix B-Connect the IO Module 29 v COGNEX

...展开详情
所需积分/C币:10 上传时间:2014-07-08 资源大小:2.79MB
举报 举报 收藏 收藏
分享 分享
康耐视相机调试设置手册

包括软件安装,参数设置,硬件接线等方面。图像清晰度调节 触发模式设置。经验之谈。

立即下载
康耐视 In-Sight 7000 系列视觉系统(技术手册).pdf

康耐视 In-Sight 7000 系列视觉系统(技术手册)pdf,康耐视 In-Sight 7000 系列视觉系统(技术手册)

立即下载
康耐视IS7210系列相机手册

美国康耐视 IS 7000 系列智能相机(智能ID)说明及配置使用手册

立即下载
康耐视视觉软件 斑点工具教程

介绍了如何用康耐视视觉软件 中的斑点工具进行斑点特征提取

立即下载
Insight软件中文操作手册-第二十章 趋势定义编辑器

simens insight是APOGEE® 楼宇自动化控制系统.

立即下载
康耐视相机程序

用于搬用空气压缩机,可自主添加空气压缩机型号,尺寸。已经在海尔工厂应用

立即下载
康耐视VisionPro软件操作手册V10.pdf

机器视觉软件美国康耐视VisionPro软件使用说明,机器视觉软件美国康耐视VisionPro软件使用说明

立即下载
康耐视 In-Sight 相机编程说明书

康耐视 In-Sight电子表格编程说明书。

立即下载
康耐视In_Sight全套资料

一些康耐视智能机In_Sight的学习资料,对初学者很有帮助

立即下载
康耐视配置说明书.pdf

康耐视配置说明书.pdf

立即下载
康耐视VisionPro 操作手册.pdf

康耐视VisionPro的中文操作手册,PDF版本

立即下载
康耐视congnex-In Sight5000说明

康耐视congnex-In Sight5000说明

立即下载
康耐视IN-sight教程上

康耐视只能相机应用详细教程 它是什么样的产品? 新型In-Sight 视觉系统平台 涵盖从入门级到高性能的In-Sight 视觉系统 重要信息: “终极视觉系统 – 体积小、结实耐用和高度智能化” 客户卖点 设置简便5倍 = 节省时间 &成本 高性能In-Sight视觉系统 有入门级产品选择 如何击败竞争对手? 最新型硬件提供功能强大、经广泛认可的In-Sight视觉系统工具 占领低端市场上的最佳视觉系统

立即下载
ModbusTCP/RTU网关设计

基于UIP协议栈,实现MODBUS联网,可参考本文档资料,有MODBUS协议介绍

立即下载
html+css+js制作的一个动态的新年贺卡

该代码是http://blog.csdn.net/qq_29656961/article/details/78155792博客里面的代码,代码里面有要用到的图片资源和音乐资源。

立即下载
iCopy解码软件v1.0.1.7.exe

解ic,id,hid卡密码破解ic,id,hid卡密码破解ic,id,hid破解ic,id,hid卡破解ic,id,hid卡密码密码卡密码破解ic,id,hid卡...

立即下载
分布式服务框架原理与实践(高清完整版)

第1章应用架构演进1 1.1传统垂直应用架构2 1.1.1垂直应用架构介绍2 1.1.2垂直应用架构面临的挑战4 1.2RPC架构6 1.2.1RPC框架原理6 1.2.2最简单的RPC框架实现8 1.2.3业界主流RPC框架14 1.2.4RPC框架面临的挑战17 1.3SOA服务化架构18 1.3.1面向服务设计的原则18 1.3.2服务治理19 1.4微服务架构21 1.4.1什么是微服务21 1.4.2微服务架构对比SOA22 1.5总结23 第2章分布式服务框架入门25 2.1分布式服务框架诞生背景26 2.1.1应用从集中式走向分布式.26?

立即下载