2015.06
V1.0
User Manual
DJI PC
Simulator
2
©
2015 DJI. All Rights Reserved.
The DJI PC Simulator is a ight simulator designed for SDK developers. The simulator creates
a virtual 3D environment and a data analysis from ight data transmitted to the PC via the
UDP protocol.
Supported Operating Systems: Windows 7, Windows 8 and Windows 8.1
Supported DJI Platforms: Matrice 100, Inspire 1, Phantom 3 Professional and Phantom 3
Advanced
Using the DJI PC Simulator
1. Download the DJI WIN driver from the DJI ofcial website and follow the instructions to install the
driver. You must install the driver before running the simulator.
2. Unzip the “DJISimulator-Installer.rar” le, and then follow the instructions to install the program.
The Simulator Cong window will appear once you launch the DJI PC Simulator. Set the Latitude
and Longitude values based on your preference.
Introduction
The aircraft will not take off if the latitude and longitude values are near a No Fly
Zone.
Select Show Log Window under the Log Settings tab to display the log window.
DJI PC Simulator User Manual
©
2015 DJI. All Rights Reserved.
3
Do NOT launch the DJI Pilot app when the DJI PC Simulator is running.
Do NOT mount the propellers on the aircraft when the DJI PC Simulator is running.
3. Connect the aircraft to your PC via a Micro USB cable, and then power on the aircraft and the
remote controller. Click Display Simulator.
4. Start the simulation by clicking Start Simulation. You can use the remote controller to change the
course of the aircraft or bring it back with the Return-to-Home function. Enable API Control to
allow control from a mobile or onboard device. World X, Y, Z represents the North-South, East-
West, and Up-Down axes (take the North, East and Up directions as positive).