# BOOT MODE
## download
### Flash size 8Mbit: 512KB+512KB
boot_v1.2+.bin 0x00000
user1.1024.new.2.bin 0x01000
esp_init_data_default.bin 0xfc000 (optional)
blank.bin 0x7e000 & 0xfe000
### Flash size 16Mbit: 512KB+512KB
boot_v1.2+.bin 0x00000
user1.1024.new.2.bin 0x01000
esp_init_data_default.bin 0x1fc000 (optional)
blank.bin 0x7e000 & 0x1fe000
### Flash size 16Mbit-C1: 1024KB+1024KB
boot_v1.2+.bin 0x00000
user1.2048.new.5.bin 0x01000
esp_init_data_default.bin 0x1fc000 (optional)
blank.bin 0xfe000 & 0x1fe000
### Flash size 32Mbit: 512KB+512KB
boot_v1.2+.bin 0x00000
user1.1024.new.2.bin 0x01000
esp_init_data_default.bin 0x3fc000 (optional)
blank.bin 0x7e000 & 0x3fe000
### Flash size 32Mbit-C1: 1024KB+1024KB
boot_v1.2+.bin 0x00000
user1.2048.new.5.bin 0x01000
esp_init_data_default.bin 0x3fc000 (optional)
blank.bin 0xfe000 & 0x3fe000
# NON-BOOT MODE
## download
eagle.flash.bin 0x00000
eagle.irom0text.bin 0x10000
blank.bin
Flash size 8Mbit: 0x7e000 & 0xfe000
Flash size 16Mbit: 0x7e000 & 0x1fe000
Flash size 16Mbit-C1: 0xfe000 & 0x1fe000
Flash size 32Mbit: 0x7e000 & 0x3fe000
Flash size 32Mbit-C1: 0xfe000 & 0x3fe000
esp_init_data_default.bin (optional)
Flash size 8Mbit: 0xfc000
Flash size 16Mbit: 0x1fc000
Flash size 16Mbit-C1: 0x1fc000
Flash size 32Mbit: 0x3fc000
Flash size 32Mbit-C1: 0x3fc000
## compile
modify eagle.app.v6.ld, as
irom0_0_seg : org = 0x40210000, len = 0x6C000
> NOTICE: UPDATE is not supported in non-boot mode; 4Mbit Flash is not supported in non-boot mode;
# Update steps
1.Make sure TE(terminal equipment) is in sta or sta+ap mode
AT+CWMODE=3
OK
2.Make sure TE got ip address
AT+CWJAP="ssid","12345678"
OK
AT+CIFSR
192.168.1.134
3.Let's update
AT+CIUPDATE
+CIPUPDATE:1 found server
+CIPUPDATE:2 connect server
+CIPUPDATE:3 got edition
+CIPUPDATE:4 start start
OK
> NOTICE: If there are mistakes in the updating, then break update and print ERROR.
基于NONOS_SDK动手做个8266毕设小案例，smartConfig + MQTT协议轻松实现远程控制一盏LED。
5星 · 超过95%的资源 需积分: 50 17 浏览量
2018-01-13
19:40:55
上传
评论 3
收藏 5.53MB RAR 举报 
基于NONOS_SDK动手做个8266毕设小案例，smartConfig + MQTT协议轻松实现远程控制一盏LED。 （180个子文件） 
libgcc.a 587KB libwpa2.a 354KB liblwip.a 346KB liblwip_536.a 346KB libat.a 338KB libnet80211.a 266KB libpp.a 232KB libwps.a 222KB libmain.a 215KB libssl.a 214KB libmqtt.a 167KB libmesh.a 155KB libphy.a 154KB libwpa.a 122KB libsmartconfig.a 105KB libcrypto.a 101KB libdriver.a 65KB libespnow.a 54KB libuser.a 43KB libupgrade.a 33KB libpwm.a 28KB libmodules.a 22KB libjson.a 13KB libairkiss.a 11KB gen_misc.bat 3KB user2.1024.new.2.bin 419KB user1.1024.new.2.bin 419KB user1.2048.new.5.bin 419KB user2.2048.new.5.bin 419KB user1.2048.new.5.bin 417KB user2.2048.new.5.bin 417KB user2.1024.new.2.bin 417KB user1.1024.new.2.bin 417KB eagle.irom0text.bin 276KB eagle.flash.bin 34KB blank.bin 4KB boot_v1.7.bin 4KB boot_v1.6.bin 4KB boot_v1.2.bin 2KB esp_init_data_default.bin 128B eagle.flash.bin_rep 34KB esp_init_data_default.bin_rep 128B mqtt.c 28KB uart.c 27KB spi.c 18KB spi_interface.c 17KB spi_overlap.c 15KB mqtt_msg.c 13KB sdio_slv.c 13KB hal_key.c 10KB i2c_master.c 10KB key.c 7KB user_main.c 7KB hw_timer.c 5KB utils.c 4KB config.c 4KB proto.c 3KB gpio16.c 3KB queue.c 2KB wifi.c 2KB smartconfig.c 2KB ringbuf.c 2KB .cproject 4KB user_main.d 2KB config.d 2KB mqtt.d 2KB hal_key.d 1KB queue.d 1KB utils.d 1KB wifi.d 1KB smartconfig.d 1KB proto.d 1KB ringbuf.d 1KB mqtt_msg.d 931B eagle.dump 1.64MB espconn.h 32KB user_interface.h 19KB eagle_soc.h 12KB slc_register.h 12KB mesh.h 10KB spi_interface.h 9KB queue.h 8KB spi_register.h 8KB uart_register.h 7KB uart.h 7KB uart_register.h 6KB at_custom.h 5KB mqtt.h 5KB mqtt.h 5KB jsontree.h 5KB mqtt_msg.h 5KB mqtt_msg.h 5KB gpio.h 4KB ets_sys.h 4KB c_types.h 4KB jsonparse.h 3KB osapi.h 3KB uart.h 3KB i2c_master.h 3KB airkiss.h 3KB共 180 条
- 1
- 2
- 1
- 2
前往页