下载  >  操作系统  >  其它  > IEEE802.3bw-100BASE-T1-2015(roadR-Reach(BRR)或OABR(Open Alliance BroadR-Reach)技术)

IEEE802.3bw-100BASE-T1-2015(roadR-Reach(BRR)或OABR(Open Alliance BroadR-Reach)技术) 评分

BroadR-Reach(BRR)或OABR(Open Alliance BroadR-Reach)技术,车载以太网的物理层技术
Grateful acknowledgment is made for portions of this standard reprinted with permission from Broadcom Corporation, OPEN Alliance BroadR-Reach(OABR)Physical Layer Transceiver Specification For Automotive applications V3.2, June 24, 2014, 0 2014 Abstract: The 100BASE-T1 Physical Layer(PHY)specifications and management parameters for point-to-point full duplex 100 Mb/s operation over single twisted pair balanced cabling is defined in this amendment This specification provides fully functional and electrical specifications for the type 100BASE-T1 PHY. This specification also specifies the baseband medium used with 100BASE-T1 Keywords: 100BASE-T1; copper; Ethernet; IEEE 802. 3bW TM; MASTER-SLAVE, Medium Dependent Interface Physical Coding Sublayer; physical layer; Physical Medium Attachment 3al Institute of Electrical and electronics engineers Inc ark Avenue. New york. Ny 10016-5997 USA Copyright o 2016 by The institute of Electrical and Electronics Engineers, Inc All rights reserved. Published 8 March 2016. Printed in the United States of America IEEE and 802 are registered trademarks in the U.S. Patent Trademark Office, owned by the Institute of Electrical and Electronics Engineers, Incorporated Print:|SBN978-150440137-1 STD20531 PDF:|SBN978-1-50440138-8 STDPD20531 IEEE prohibits discrimination, harassment, and bullying Formoreinformationvisithttp://www.ieee.orgwweb/aboutus/whatis/policies/p9-26.htm/ No part of this publication may be reproduced in any form, in an electronic retrieval system or othenwise, without the prior written permission of the publisher Important Notices and Disclaimers Concerning IEEE Standards Documents ieee documents are made available for use subject to important notices and legal disclaimers. These notices and disclaimers, or a reference to this page, appear in all standards and may be found under the heading ' Imporlant Notice"or "Important Notices and Disclaimers Concerning IEEE Standards Documents Notice and Disclaimer of Liability Concerning the Use of IEEE Standards Documents IEEE Standards documents(standards, recommended practices, and guides), both full-use and trial-use,are developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association ("IEEE-SA Standards Board. IEEE (the Institute")develops its standards through a consensus development process, approved by the american National Standards Institute ( ANSP), which brings together volunteers representing varied viewpoints and interests to achieve the final product Volunteers are not necessarily members of the Institute and participate without compensation from IEeE While ieee administers the process and establishes rules to promote fairness in the consensus development process, ieee does not independently evaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contained in its standards ieee does not warrant or represent the accuracy or content of the material contained in its standards, and expressly disclaims all warranties(express, implied and statutory) not included in this or any other document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, iEeE disclaims any and all conditions relating to: results; and workmanlike effort IEEE Standards documents are supplied"As Is and"WITH ALL FAULTS Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEee undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standar IN NO EVENT SHALL IFFF BE LIABLF FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES: LOSS OF USE DATAOR PROFITS: OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY. WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE Copyright C 2016 IEEE. All rights reserved Translations The ieee consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by ieee should be considered the approved IEEE standard Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards board Operations Manual shall not be considered or inferred to be the official position of ieEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of Ieee At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE Standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of Ieee Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of Membership affiliation with IEEE. However, ieee does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of proposed change of text, together with appropriate supporting comments. Since IEee standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests for this reason ieee and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, ieee does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group Comments on standards should be submitted to the following address Secretary IEEE-SA Standards board 445 Hoes lane Piscataway, NJ08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulator requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. ieeE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so Copyrights iFFE draft and approved standards are copyrighted by ieFf under u.s. and international copyright laws They are made available by Ieee and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, ieee does not waive any rights in copyright to the documents Copyright C 2016 IEEE. All rights reserved Photocopies Subject to payment of the appropriate fee, ieee will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service. 222 Rosewood Drive. Danvers, MA 01923 USA: +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of ieee Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments corrigenda, or errata. An official ieee document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect Every Ieee standard is subjected to review at least every ten years. When a document is more than ten year old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard In order to determine whether a given document is the current edition and whether it has been amended throughtheissuanceofamendmentscorrigendaorerratavisittheIee-saWebsiteathttp:// ieeexplore.ieee. org/xpl/standards. jsp or contact IEeE at the address listed previously. For more information abouttheIeeESaorIeEe'sstandardsdevelopmentprocessvisittheIeEe-saWebsiteathttp:/ standards.ieee.org Errata Errata,ifanyforallieeestandardscanbeaccessedontheIeee-saWebsiteatthefollowingUrl:http:/ standards. ieee. org/findstds/errata/index. htmL. Users are encouraged to check this URL for errata dically Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the Ieee with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance then the statement is listed on the ieee SaWebsiteathttp://standards.ieeeorg/about/sasb/patcom/patents.htmlLettersofAssurancemayindicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses Essential Patent Claims may exist for which a Letter of assurance has not been received The IeEE responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the ieee Standards association Copyright C 2016 IEEE. All rights Participants The following individuals were officers and members of the ieEE 802.3 working group at the beginning of the ieee P802. 3bw working group ballot. Individuals may have not voted, voted for approval, disapproval or abstained on this standard David J Law, IEEE 802. 3 Working Group chair Adam Healey, IEEE 802.3 Working Group Vice-Chair Pete Anslow, IEEE 802.3 Working Group Secretary Steven B. Carlson, IEEE 802. 3 Working Group Executive Secretary Valerie Maguire, IEEE 802.3 Working Group Treasurer Thomas Hogenmiller, IEeE P802. 3bw 100BASE-Tl Task Force chair, Phase I Steven B. Carlson, IEEE P802. 3bw 100BASE-TI Task Force chair Phase 2 Mehmet Tazehay TEFF P8023bw 100BASE-TI Task Force vice-Chair Curtis Donahue, IEEE P802. 3bw 100BASE-Tl Task Force Editor-in-Chief Ghani abbas Christopher r. cole Riu hirai John△ bott Keith Conroy Brian holden David abramson Eugene D Rita horner Shadi abughazaleh Shaoan dai Bernd horrmeyer Faisal ahmad John d'ambrosia Ⅴ ictor hou Michel Allard Mike Darling Rui Hu Dale amason Y air darshan Liang-wel Huang Oleksandr Babenko Piers dawe Scott irwin Koussalya Balasubramanian Fred dawson Kazuhiko ishiba Thananya baldwin William delveau Hideki sono Denis beaudoin John Dickinson Tom issenhuth Christian beia Chris diminico Mitsuru iwaoka Yakov Belopolsky Thuven dinh Kenneth Jackson Michael bennett Dan dove Jack Jewel Gary bernstein Mike dudek Wenbin j Vipul Bhatt David dwelley Andrew jimenez William bliss Hesham elbakor Chad Jones Brad booth David estes Antony Joseph Martin bouda John ewen Yasuaki Kawatsu Edward boyd Josef faller Michael Kelsen Arash farhoodfar Yong K Im Ralf-Peter braun Shahar Feldman Jonathan King Theodore brillhart Alan Flatman Scott Kipp Paul brooks Howard frazier Michael Klempa Alan brown Richard frosch Avi Liger David brown Michael furlon Curtis Kittle Matthew brown Mikc gardner Shigeru kobayashi Thomas Brown Ali ghiasi Keisuke Kojima Phillip brownlee Joel Goergen Paul Kolesar Mark B gang gong Tom Kol Juan-Carlos calderon James graba Glen Kramer J. Martin Carroll Robert grow albert Kuo Mandeep chadha Mark gustlin Hans lackner David chalupsky Marek hajduczenia Efstathios larios Xin Chang Bernie hammond ayne Larsen Whaling Cheng Jeffrey leath Ryan latchman Ahmad chini Carl herman Mark laubach Golam Choudhury David hess Greg Le cheminant Peter cibula Yasuo hidaka Andre lessard Copyright C 2016 IEEE. All rights David lewis Moon park Bharat tailor Lei li Pravin patel Akio tajima Mike Peng Li Petar Pepeljugoski Takayuki Tajima Shaohua li Gerald Pepper Tomoo Takahara Thomas Lichtenegger Ruben perez De Aranda Satoshi takahashi Ru Jian lin Alonso Kiyoto takahata Robert lingle Michael Peters Alexander tan JamesLiu John petrilla Toshiki tanaka enyu Liu ick Pimpinella Brian Teipen William lo Rainer pochmcrer Gcoffrcy Thompson Miklos lukacs William powell Alan t Kent lusted Richard Prodan Nathan tracy Rick rabinovich David tremblay James malkemus Saifur rahman albert tretter Yonatan malkiman Adee r: Stephen Trowbridge Edwin mallette Ram rao Wen-Cheng tseng Arthur marris Duane remen Yoshihiro tsukamoto Chris mash Ⅴ ictor renteria Mike tu Kirsten matheus Michael ressl Alan ugolil Erdem matoglu Poldi (pavlick) rimboim John ulm Laurence matola Salvatore rotolo Ed ulrichs tt Musa unch John McDonough Vineet salunke Sterling A. vaden Richard M Sam sambasivan Stefano valle Richard mellitz Yasuo sasaki Paul vanderlaan Leo montreuil Fred schindler Robert wagner Paul me Stefan Scheele Robert Wang Charles moore Peter scruton Tongtong Wang Andy moorwood Alexander seiger Xiaofeng Wang Thomas mueller aoshi serizawa Xinyuan Wang Ron muir Megha Shanbhag Zhong Feng Wang Dale murray Stephen Shellhammer David warren Henry muyshondt Bazhong shen Brian Welch Edward nakamoto Mizuki hirao Matthias wendt Gary nicholl Kapil shrikhande Oded Wertheim Paul nikolich Jeff slavick Ludwig winkel John nola Scott s Peter w Kevin noll Yoshiaki Sone Yu xu Ronald nordin Lennart yseboodt Mark nowell Bryan Sparrowhawk Liquan Yuan David ofelt Edward sprague Hayato yuki Ichiro Ogura Peter stassar Garold Yurko Leonard stencel Andrew cambell Sujan Pandey Ken-Ichi suzuk Jin Zhang Sesha panguluri Steve Swanson Yan Zhuang Carlos pardo Andre Szczepanek G Zimmerman William szeto Copyright C 2016 IEEE. All rights reserved The following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention Iwan adhicandra Werner hoelzl Arumugam Paventhan Thomas alexander noriyuki lkeuchi Adee ran Richard alfy Atsushi lto R.K. Rannow Dale amason Alon regev Peter Anslow Michael Johas teener Maximilian Riegel Oleksandr babenko Adri Jovin Robert robinson Leslie baxter Shinkyo kaku Benjamin rolfe Tuncer bay kas Stuart Kerry Dan romascanu Christian boiger Yongbum Kim Bartien Sayogo Ralf-Peter braun Scott Ki Nicola Scantamburlo Nancy Bravin Bruce kraemer David solomon Theodore brillhart Mark laubach Thomas starai William byrd David. l i Eugene Stoudenmire Steven B. Carlson Hyeong Ho Lee Walter Struppler Juan carreon David lewis Steven Swanson Clark Carty Michael Swearingen Mandeep chadha Arthur h light William szeto Keith Chow William lumpkins Patricia thaler Charles cook Michael lynch James Theodoras Rodney cummings ElⅤ is maculuba Geoffrey thompson Yezid d Valerie maguire Mark-Rene uchida Daniel do Jeffery maki Alexander Umno Souray dutta Arthur marris Sterling vaden Richarde Edward mccall Lorenzo v angelista Dmitri varsanofiev Yukihiro fujimoto Brett Mcclellan James graba Richard mellitz Prabodh varshney Balasubramanian vittal Eric w.Gray Tremont miao David gregson Charles moorwood George Vlantis Khurram waheed Randall groves Matthew mora Karl webe Robert grow Jose morales Chris guy Hung-Yu wei Henry Muyshondt Natalie wieckowski Stephen haddock Michael newman Andreas Wolf Marek hajduczenia Nick s.A. Nikjoo Peter Wu Satoshi obara Oren yuen Jerome her Stephen Palm Jin zhang Marco hernandez Zhen Zhou 8 Copyright C 2016 IEEE. All rights reserved When the IFEF-SAa Standards Board approved this standard on 26 October 2015, it had the following membership John d. kulick che Jon walter rosdahl. vice chair Richard H. Hulett, Past Ch Konstantinos Karachalios. Secretary Masayuki rIos Joseph L. Koepfingers Stephen J Shellhammer Ted Burse David ]. law Adrian P. Stephens Stephen dukes Hung Ling Yatin trivedi Jean-Philippe Faure Andrew Myles Philip winston T W. OIse Don Wright Gary Hoffman Glenn parsons Yu Yuan Michael Janezic Ronald c. petersen Daidi zhon Annette D. Reilly *Member emeritus Copyright C 2016 IEEE. All rights

...展开详情
所需积分/C币:11 上传时间:2019-02-18 资源大小:3.06MB
举报 举报 收藏 收藏 (2)
分享 分享

评论 下载该资源后可以进行评论 1

chan666 这个资源是最便宜的
2019-10-30
回复
IEEE 802.3-bw 车载以太网标准规范 官方版本

学习和研究车载以太网的必备资料,本PDF是IEEE官方版本。

立即下载
802.3bw-2015

IEEE 802.3bw 2015,车载以太网100base-T1标准,车载以太网开发必备

立即下载
Open_Alliance_100BASE-T1_PMA_Test_Suite_v1.0.pdf

汽车以太网联盟OPEN的 TC1 100BASE-T1 PMA Spec.

立即下载
ModbusTCP/RTU网关设计

基于UIP协议栈,实现MODBUS联网,可参考本文档资料,有MODBUS协议介绍

立即下载
html+css+js制作的一个动态的新年贺卡

该代码是http://blog.csdn.net/qq_29656961/article/details/78155792博客里面的代码,代码里面有要用到的图片资源和音乐资源。

立即下载
iCopy解码软件v1.0.1.7.exe

解ic,id,hid卡密码破解ic,id,hid卡密码破解ic,id,hid破解ic,id,hid卡破解ic,id,hid卡密码密码卡密码破解ic,id,hid卡...

立即下载
分布式服务框架原理与实践(高清完整版)

第1章应用架构演进1 1.1传统垂直应用架构2 1.1.1垂直应用架构介绍2 1.1.2垂直应用架构面临的挑战4 1.2RPC架构6 1.2.1RPC框架原理6 1.2.2最简单的RPC框架实现8 1.2.3业界主流RPC框架14 1.2.4RPC框架面临的挑战17 1.3SOA服务化架构18 1.3.1面向服务设计的原则18 1.3.2服务治理19 1.4微服务架构21 1.4.1什么是微服务21 1.4.2微服务架构对比SOA22 1.5总结23 第2章分布式服务框架入门25 2.1分布式服务框架诞生背景26 2.1.1应用从集中式走向分布式.26?

立即下载
Camtasia 9安装及破解方法绝对有效

附件中注册方法亲测有效,加以整理与大家共享。 由于附件大于60m传不上去,另附Camtasia 9百度云下载地址。免费自取 链接:http://pan.baidu.com/s/1kVABnhH 密码:xees

立即下载
电磁场与电磁波第四版谢处方 PDF

电磁场与电磁波第四版谢处方 (清晰版),做天线设计的可以作为参考。

立即下载