MOTOROLA-GP328写频软件

================================================================ Professional Radio - Customer Programming Software R06.01.00 ================================================================ Known CPS Issues: ---------------- 1) If your PC is running the first release of Microsoft Windows 95 and Internet Explorer has not been installed, you may experience problems in installing and running the CPS due to certain components of the operating system being out of date. To eliminate this problem two Microsoft patches have been included on the CPS CD. If you experience any problems under Windows 95, please go to the CD and run: /Win95Patches/40comupd.exe /Win95Patches/dcom95.exe and then re-install the CPS. 2) On some PCs, the CPS may abnormally terminate if Print Preview is attempted on the Print Custom screen. This problem only occurs when Print All is selected. This problem has been observed on Compaq Windows 98 computers with the following programs running: * Easy Access Internet Program (cpqEasyAcc.exe) * Compaq Internet Watchdog Program (watchdog.exe) If this CPS function is to be used, it is recommended that these programs be removed from the PC startup. 3) When the tree view is printed some nodes may overlap on the printout and an extra blank page may be printed. This issue is more likely to occur on large codeplug configurations. 4) On some printers, the columns in some printed tables might be slightly wider than they should be, causing the table to spread horizontally onto a second page. 5) Emergency Revert Personalities assigned on the Signaling Configuration Page will not be tracked if the personality being referenced is moved in the tree view. 6) On certain HP Laserjet printers the Print Summary option will only print one page. If you experience this problem, it is recommended that you first save the information to a file and then use any Editor (Word, Wordpad, etc...) to open the file and print the summary information. Major CPS Enhancements: ----------------------- New functionality has been added to accommodate the following radio models: EX500, EX600; GP346, GP386; PRO5150 Elite, PRO7150 Elite; GP328 Plus, GP338 Plus Home Revert AutoKey When enabled, this feature will allow the radio user to press a single button and have the radio revert to the specified Home Revert Zone/Channel and automatically key-up the radio. This feature will provide the radio user with an Emergency-like feature, which will automatically key up and send PTT ID (if enabled) to all other radio users. This feature was originally implemented for LS Trunking and has now been added to the Conventional mode for LS Trunking. Revert Scan When set, it will enable the normal scan implementation whereby, when scan exits, it returns to the last landed zone/channel. When cleared (disabled), it uses alternative revert scan, which causes the radio, when exiting scan, to return to the channel from where scan is entered. This is a mobile only feature. This functionality will be added to the Professional Series mobile radio in late 2001. Frequency or FCC Channel Number Input This feature will allow the user to enter either the FCC Channel number or Frequency when programming 800MHz LS Trunking radios. An additional Option has been added to enable or disable the feature. Extended 800MHz Frequency range for Latin America This is an enhancement to increase the 800MHz Frequency range for Latin America. Reported Issues ------------------ 1) Resolved the issue whereby selecting "Rx Only" in first Conventional Personality caused an unrecoverable invalid condition. Programming Hints: ------------------ 1) It should be noted that a new/added conventional personality must be assigned to a zone/channel position. To add a zone to a radio click the "+" in a Personality Assignment to Zone Window. To add a conventional personality to the radio, click the "+" on a Conventional Personality Window. To add an additional conventional personality to a zone go to the Personality Assignment to Zone:Channel window for the desired zone. Click the right mouse key within the channel table to add a conventional personality entry. Please read the CPS help for additional information. 2) Speed Dial buttons should not be programmed to the P1, P2, and P3 buttons on radios, which overlay these buttons with the menu navigation keys. The speed dial buttons will not operate in this configuration because the buttons function as the menu navigation keys when phone mode is entered. 3) When adding a new conventional personality, verify that the bandwidth selected on the Conventional Personality Basic screen is correct. Incorrect selections will lead to poor radio performance.