onvif2mqtt:将ONVIF事件（从IP摄像机）转换为MQTT消息

# ONVIF2MQTT <!-- ALL-CONTRIBUTORS-BADGE:START - Do not remove or modify this section --> [](#contributors-) <!-- ALL-CONTRIBUTORS-BADGE:END --> [](https://app.fossa.com/projects/git%2Bgithub.com%2Fdmitrif%2Fonvif2mqtt?ref=badge_shield) ## Table of Contents * [ONVIF2MQTT](#onvif2mqtt) * [Purpose](#purpose) * [Background](#background) * [Requirements](#requirements) * [Hardware Compatibility](#hardware-compatibility) * [Supported Events](#supported-events) * [Installation](#installation) * [Docker](#docker) * [Baremetal](#baremetal) * [Configuration](#configuration) * [Notes](#notes) * [MQTT Notes](#mqtt-notes) * [Templating / Custom Topics](#templating--custom-topics) * [Schema](#schema) * [Examples / Guides](#examples--guides) * [Using with Shinobi](#using-with-shinobi) * [Using with HomeAssistant](#using-with-homeassistant) * [Getting Started / Sample Config](#getting--started) ## Purpose This package aims to implement a transformation layer between the ONVIF event stream (sourced from IP cameras / camera doorbells) and MQTT (a messaging protocol largely used in home automation). Any number of ONVIF devices is supported. ## Background After acquiring an EzViz DB1 camera doorbell, I was happy to find a PIR sensor on it. I was then dismayed to find out that there is no open API to consume the triggered status of it. This project was written to scratch that itch, but it should work for any other ONVIF compliant devices with built-in sensors. ## Requirements - Docker (unless running Baremetal) - MQTT Broker - At least one ONVIF compatible device implementing events. ## Hardware Compatibility - EZViz DB-1 Doorbell (flashed with LaView firmware) - **TESTED** - EZViz DB-1 Doorbell (flashed with HikVision 200321 firmware) - **TESTED** - Nelly's Security Doorbell (NSC-DB2) (flashed with Nelly's v5.2.4 191216 firmware) - **TESTED** - Laview Halo One Doorbell - **TESTED** - SV3C SV-B01POE-5MPL-A - **TESTED** - IMOU cue 2 - **TESTED** - Provision ISR I3-340IP536+ - **TESTED** - Provision ISR I4-340IP5MVF - **TESTED** - RCA HSDB2A Doorbell (flashed with LaView firmware) - Reolink E1 Pro - **TESTED** - Hikvision DB2 - **Does not work, TODO: implement push point subscriptions.** - Any other ONVIF compliant IP Camera - if it works for you please let me know so that this list can be updated. ## Supported Events - Motion Sensor - That's it for now, but it's easy to implement new events, just submit a PR or a ticket. ## Installation ### Docker This is the recommended method of consumption for everyday users. 1. [Pull the image from docker registry.](https://hub.docker.com/r/dfarkov/onvif2mqtt) ``` docker pull dfarkov/onvif2mqtt:latest ``` 2. Run the image, mounting a config volume containing your configuration (`config.yml`) ``` docker run -v PATH_TO_CONFIGURATION_FOLDER:/config dfarkov/onvif2mqtt ``` ### Baremetal This method requires an installation of NodeJS / NPM. This is the recommended installation method for development purposes. 1. Clone this repo ``` git clone https://github.com/dmitrif/onvif2mqtt ``` 2. Navigate to the repo folder. ``` cd ./onvif2mqtt ``` 3. Install dependencies ``` npm install ``` 4. Create and fill out a configuration file: ``` touch config.dev.yml ``` 5. Run the app: ``` # For development npm run dev # For production build npm run build CONFIG_FILE=./config.dev.yml npm run start ``` ## Configuration ### Notes Configuration can be placed into a `config.yml` file, containing valid YAML. This file should be placed into the host-mounted config volume; if another location is preferred then the file path can be provided as an environment variable `CONFIG_PATH`. ### MQTT Notes By default this package publishes events to an topic `onvif2mqtt/$ONVIF_DEVICE/$EVENT_TYPE/` with a value of `on | off` for each captured event type. ### Templating / Custom Topics However, by using the `api.templates` option in configuration, one can define a custom `subtopic` and specify a custom template. The following tokens will be interpolated in both the `subtopic` and the `template` values: - `${onvifDeviceId}` - name of the ONVIF device (e.g. `doorbell`) - `${eventType}` - type of event captured (e.g. `motion`) - `${eventState}` - boolean state of the event (if applicable) The messages will be sent to a topic of the following format: `onvif2mqtt/$ONVIF_DEVICE/$SUBTOPIC`. ### Schema ```yaml api: templates: #Subtopics can be nested with `/` and are interpolated - subtopic: ${eventType}/json # Should this message be retained by MQTT # Defaults to true retain: false # Template that should be published to the topic, # values are interpolated template: >- { "device": "${onvifDeviceId}", "eventType": "${eventType}", "state": "${eventState}" } # You can specify any number of custom subtopics. - subtopic: hello_world template: hello from ${onvifDeviceId} # MQTT Broker configuration, # required due to nature of project. mqtt: host: 192.168.0.57 port: 1883 username: user password: password # All of your ONVIF devices onvif: # Name for the device (used in MQTT topic) - name: doorbell hostname: localhost port: 80 username: admin password: admin ``` ## Examples / Guides ### Using with Shinobi 1. [Configure Shinobi.video to use `mqtt`](https://hub.shinobi.video/articles/view/xEMps3O4y4VEaYk) 2. Configure a shinobi monitor to trigger motion detector on API events. 3. Add custom subtopic for shinobi: ```yaml ... api: templates: - subtopic: shinobi retain: false template: >- { "plug": "${onvifDeviceId}", "reason": "${eventType}", "name": "${onvifDeviceId}" } ... ``` ### Using with HomeAssistant 1. Install the MQTT HomeAssistant integration. 2. Define custom `binary_sensor` in HomeAssistant's `configuration.yaml`: ```yaml binary_sensor doorbell_motion: - platform: mqtt name: doorbell_motion state_topic: "onvif2mqtt/doorbell/motion" ``` ### Getting Started Simplest way forward is to base your configuration off [`config.sample.yml`](https://github.com/dmitrif/onvif2mqtt/blob/master/config.sample.yml). ## Contributors ✨ Thanks goes to these wonderful people ([emoji key](https://allcontributors.org/docs/en/emoji-key)): <!-- ALL-CONTRIBUTORS-LIST:START - Do not remove or modify this section --> <!-- prettier-ignore-start --> <!-- markdownlint-disable --> <table> <tr> <td align="center"><a href="https://github.com/ksupipr"><img src="https://avatars1.githubusercontent.com/u/2247971?v=4?s=100" width="100px;" alt=""/><br />_{<b>Michael Bogatyrev</b>}</a><br /><a href="https://github.com/dmitrif/onvif2mqtt/commits?author=ksupipr" title="Code">💻</a></td> <td align="center"><a href="https://github.com/dmitrif"><img src="https://avatars0.githubusercontent.com/u/655800?v=4?s=100" width="100px;" alt=""/><br />_{<b>Dmitri Farkov</b>}</a><br /><a href="https://github.com/dmitrif/onvif2mqtt/commits?author=dmitrif" title="Code">💻</a> <a href="https://github.com/dmitrif/onvif2mqtt/commits?author=dmitrif" title="Documentation">📖</a> <a href="#maintenance-dmitrif" title="Maintenance">🚧</a></td> <td align="center"><a href="https://casillo.me"><img src="https://avatars0.githubusercontent.com/u/9551125?v=4?s=100" width="100px;" alt=""/><br />_{<b>Domenico Casillo</b>}</a><br /><a href="https://github.com/dmitrif/onvif2mqtt/commits?author=DomenicoCasillo" title="Code">💻</a></td> <td align="center"><a href="https://github.com/brilthor"><img src="https://avatars2.githubusercontent.com/u/567144?v=4?s=100" width="100px;" alt=""/><br /><sub><b>brilth