Opto 22 SNAP-PAC-S DATA SHEETpdf,Opto 22 SNAP-PAC-S DATA SHEET
SNAP Controllers p冒0222 SNAP PAC S-SERIES DATA SHEET page 3 /9 Form1584051130 System Architecture For this diagram, it is assumed that io Control Professional and iodisplay professional are being used SNAP PAC S-Series Controller on an Ethernet network Enterprise Network This diagram shows multiple Opto 22 SNAP 0 units connected together over an Ethernet network and controlled by a SNAP PAC S-series con troller running a control strategy. The con troller is also connected to a larger, PC running PC ru separate enterprise Ethernet network to Display OptoOPCServer Professional provide data to two PCs running Opto 22's ioDisplay HM software and Ethernet switch Sitting between the two networks network #1 the snap pac s-series controller isolates 10 and control traffic from the enterpr network, and vice ver SNAP PAC S-series contraller communicates ;E with host computers through one network nd controls /0 with other devices through the other interface Control network Ethernet switch ntoe"e目 y0 units are controlled controller on an isolated network 面酬团卌 Sensors and actuators Sensors and actuators location#1 location #2 Opto22.43044BusinessParkDrive.TemeculaCa92590-3614.Phone:951-695-3000.800-321-opto.fax:951-695-3095.ww.opto22.com InsideSales800-321-0pto.ProductsUpport:800-tek-optO.951-695-3080.Fax:951-695-3017.e-mail:sales@opto22.com Copyright(C 200) 0p o Z2. All richts reserved Dimensions and specifica ions are subject tc change. All trademarks, trade names, logos, and service narks referenced herein belong to their respective companies SNAP COntrollers pT022 SNAP PAC S-SERIES DATA SHEET page 4/9 Form1584051130 System Architecture(continued) For this diagram, it is assumed that io Control Professional and io Display Professional are being used SNAP PAC S-Series Controller and serial-based o Units This diagram shows a SNAP PAC S-series controller connected to ioControl multiple Opto 22 serial-based 0 units over an rs-485 serial network The controller is also connected to a PC running ioDisplay PC running ioControl larger, separate enterprise Ethernet Professional Professiona network to provide process data to a PC running Opto 22's io Display HM software The diagram also shows a PC Ethernet switch running io Control Professional, an application for developing control progra the SNAP controller. Once developed C SNAP PAC S-series controller the strategy is downloaded to the controls all l/o units controller and runs independently 1 O units are connected via a 2-wire rS- 485 ser RS-485 serial network and are controlled by the SNAP PAC S network series controller. Each l/0 unit is connected to its own group of sensors and actuators 邮 DPTo2市:: PTo22··::H: Sensors and actuators Sensors and actuators Sensors and actuators location f1 location #2 locatⅰon#3 0pto22·43044 Business park drive· specula,CA925903614· Phane:9516953000·8003210P0·Fax:9516953095·Www.opto22com InsideSales800-321-0pto.ProductSupport:800-tek-opTo.951-695-3080.Fax:951-695-3017.e-mail:sales@opto22.com Copyright@ 2005 Opto 22. All rights reserved. Dimensions and specificstions are subject to change All trademarks, trade names, logos, and service marks referenced herein belong to their respective comps SNAP Controllers p冒0222 SNAP PAC S-SERIES DATA SHEET page 5/9 Form1584051130 System Architecture(continued) For this diagram, it is assumed that io Control Professional and ioDisplay Professional are being used SNAP PAC S-Series Controller in Redundant Network Configuration Opto 22 Redundant Network PC With two PC with two NICs running Display NICs running Professional OptoOPCServer e可目 Ethernet switch Ethernet switch I network #1 network #2 SNAP PAC S-series controller controls all l/0 units 0 units are all connected by the controller. Each I/0 unit is connected to its own group of sensors and actuators. but all are connected to the same two networks SNAP PACR- L SNAP PAC R-I senes Sensors and actuators Sensors and actuators location #1 location #2 This diagram shows a SNAP PAC S-series controller In this configuration, if one network goes down, connected to two separate Ethernet networks. This config- devices can still communicate on the other. Each PC has uration addresses the concern that an ethernet network two network interface cards( Nics), and the SNaP pac s may fail or need maintenance, leaving the pc running series controller and the vo units SNaP PAC R-series) OptoOPCServer, the PC running ioDisplay, the controller, have two network interfaces as wel and the lo units unable to communicate Opto22.43044BusinessParkDrive.TemeculaCa92590-3614.Phone:951-695-3000.800-321-opto.fax:951-695-3095.ww.opto22.com InsideSales800-321-0pto.ProductsUpport:800-tek-optO.951-695-3080.Fax:951-695-3017.e-mail:sales@opto22.com Copyright( 200) 0po Z2. All richts reserved Dimensions and specifica ions are subject tc change. All trademarks, trade names, logos, and service narks referenced herein belong to their respective companies SNAP COntrollers pT022 SNAP PAC S-SERIES DATA SHEET age 6/9 Frm1584051130 Technical Specifications Processor 266 MHZ 32-bit ColdFire@ 5475 with integrated floating-point unit(FPU) Total RAM 32 MB (16 MB available for io Control strategy) Battery-backed RAM 8 MB Flash 16 MB (7.5 MB available for ioControl strategy; 4 MB available for file storage) Backup battery elent placeable 3.6-volt TL 5242/ lithium. 10-year minimum power-off data Communication Ethernet(host and/O Two independent 10/100 Mbps Ethernet network interfaces(RJ-45 connectors) Each interface has a separate IP address RS-232 serial (host only) Two RS-232 serial ports(one DB-9 and one pluggable connector); one port has ull handshaking RS-485 serial (10 only One Rs-485 serial port (pluggable connector); two-Wire RS-485; no mistic signal interrupts 1o unit compatibility Ethernet-based lO units Opto 22 SNAP Simple I/O, SNAP Ethernet 1/0, and SNAP Ultimate l/O units Serial-based l/o units Serial B3000, SNAP-BRS, B100/B200, mistic remote bricks(G4D16R, G4D32RS G4A8R) Power requirements 8-24 VDC. 10 Va maximum Environmenta Operating temperature oC to 60oC Storage temperature -409Cto85C Humidity 0%o to 95% relative humidity, non-condensing Software ioProject Basic Includes programming, HMI software, and configuration software; included with purchase of controller ioProject Professional io Project Basic plus OPC 2. 0-compliant OPC server, Opto Cantrol strategy and Opto Display project importing, support for serial mistic l/o units, and Ethernet link redundanancy support Other features Multiple protocol support including TCP/IP, FTP, and OptoMMP IM Real-time clock FTP server/client with file system Ethernet link redundancy or network segmenting 0pto22·43044 Business park drive· specula,CA925903614· Phane:9516953000·8003210P0·Fax:9516953095·Www.opto22com InsideSales800-321-0pto.ProductSupport:800-tek-opTo.951-695-3080.Fax:951-695-3017.e-mail:sales@opto22.com Copyright@ 2005 Opto 22. All rights reserved. Dimensions and specificstions are subject to change All trademarks, trade names, logos, and service marks referenced herein belong to their respective comps SNAP Controllers p冒0222 SNAP PAC S-SERIES DATA SHEET page 7/9 Form1584051130 Connectors and indicators Controller reset button AcL 4 DIP switches for rs-485 serial Independent 10/100 Mbps Ethernet link bias and termination 合○s2 interfaces(RJ-45 connectors) Port 2 for rs 485 scrial communications (pins 1-5 of pluggable 10-pin connector) LNK Port 1 for rs-232 serial communications (pins 6-10 of pluggable 10-pin connector) ∽U<z Pot o for rs-232 serial communications(DB-9 connector) with handshaking 8-24 VDC input power (pluggable 3-pin connector) Status and Activity lEDs RS-232 DTE Port 0 RS-485 and rs-232 Ports (DB-9 connector) Indicator Description Pin Description RS-232 serial activity on P Description 1TX/RⅩ+ port 0 DCD 2 TX/RX S1 RS-232 serial activity on 2RX 3 SIG COM ort 1 3 TX 4 S2 RS-485 serial activity (not used) 4DTR 5 (not used) STaT Startup status and control program operational status COM 6TX ACt Ethernet network activity 6DSR 7 RX LNK Link established with 7 RTS 8 GND Ethernet network 8 CTS Q a 9 RTS 9 RI 10 CTS The rs-485 interface does not support mistic signal interrupts Contact Opto 22 Product Sup- port for current information on this top Opto22.43044BusinessParkDrive.TemeculaCa92590-3614.Phone:951-695-3000.800-321-opto.fax:951-695-3095.ww.opto22.com InsideSales800-321-0pto.ProductsUpport:800-tek-optO.951-695-3080.Fax:951-695-3017.e-mail:sales@opto22.com Copyright(C 200) 0p o Z2. All richts reserved Dimensions and specifica ions are subject tc change. All trademarks, trade names, logos, and service narks referenced herein belong to their respective companies SNAP COntrollers pT022 SNAP PAC S-SERIES DATA SHEET page 8/9 Frm1584051130 Dimensions and Mounting Panel Mounting and Dimensions 48"(121.84m 4.40(11.7mnm 0.2c"(53nm BTa2之 SNAP PAO 50.80n 1.025.39mm 015"381mm) 0.50"(2.70mm) 05:102.2m) 1.5”(44. 4375" (111. 1mm) 4.17 1059m 0pto22·43044 Business park drive· specula,CA925903614· Phane:9516953000·8003210P0·Fax:9516953095·Www.opto22com InsideSales800-321-0pto.ProductSupport:800-tek-opTo.951-695-3080.Fax:951-695-3017.e-mail:sales@opto22.com Copyright@ 2005 Opto 22. All rights reserved. Dimensions and specificstions are subject to change All trademarks, trade names, logos, and service marks referenced herein belong to their respective comps SNAP Controllers p冒0222 SNAP PAC S-SERIES DATA SHEET page 9/9 Form1584051130 Dimensions and Mounting(continued) DIN-Rail Mounting and dimensions Requires a SNAP-PSDIn adapter \purchased separately) 405(102.85 OPT 2222 SNAP PAC ○ (111.1mm) FOR DIN CLIP ADD ADDITIONAL 0.06(1.52mm)TO OVERALL HEIGH CUSTONER SUPPLIED SNAF RACK DIN-RAIL ADAPTER CLIR 35mm CIN RAIL NOTE: BESURE TC CONSIDER Opto22.43044BusinessParkDrive.TemeculaCa92590-3614.Phone:951-695-3000.800-321-opto.fax:951-695-3095.ww.opto22.com InsideSales800-321-0pto.ProductsUpport:800-tek-optO.951-695-3080.Fax:951-695-3017.e-mail:sales@opto22.com Copyright(C 200) 0p o Z2. All richts reserved Dimensions and specifica ions are subject tc change. All trademarks, trade names, logos, and service narks referenced herein belong to their respective companies LATEST PRODUCTS oPT 22 PRODU SUPPORT COMPANY NFORMATION Products Opto 22 Software Opto 22 produces a broad array of reliable, flexible hardware and Opto 22 s ioProject and Factory Floor software 回卫时 software products for industrial automation, remote monitoring, enterprise suites provide full-featured and cost-effective data acquisition, and machine-to-machine(M2M) applications controL, HMI, and OPC software to power your Opto 22 hardware. These software applications SNAP Ethernet Systems help you develop control automation solutions, build Based on the Internet Protocol (IP), SNAP Ethernet systems offer easy-to-use operator interfaces, and expand your flexibility in their network connectivity and in the software applications manufacturing systems' connectivity they work with. The physical network may be a wired Ethernet network, a cellular wireless network, or a modem. a wide variety of software Quality applications can exchange data with SnaP Ethernet systems, including In delivering hardware and software solutions forworldwide device Opto 22s own ioProjectIM suite of control and HM software management and control, Opto 22 retains the highest commitment to Manufacturing resource planning(MRP), enterprise management, quality. We do no statistical testing; each product is made in the U.S.A and other enterprise systems and is tested twice before leavingour 160,000 square-foot manufacturing Human-machine interfaces(HMIs facility in Temecula, California. That s why we can guarantee solid-state Database · Email systems oPc client software Product Support Custom applications Opto 22S Product Support Group offers comprehensive technical Modbus/TCP software and hardware support for opto 22 products. The staff of support engineers represents ears of training and experience, and can assist with a variety of project SNAP Ethernet system hardware consists of controllers and O units. implementation questions. Product support is available in English and Controllers provide central control and data distribution. IO units provide spanish from Monday through Friday 7 a.m. to 5 p. m. PST. local connection to sensors and equipment Opto 22 Web Sites SNAP OEM Systems www.opto22.com Opto 22 SNAP OEMI/0 systems are highly configurable, programmable nvio.opto22.com processors intended for OEMs, IT professionals, and others who need to use custom software with Opto 22 SNAP /O modules www.internetio.com(liveInternetl/odemo Linux applications running on these systems wf Other resources can read and write to analog, simple digital, and serial Optolnto cds y0 points on SNAPI,0 modules using easily implemented file- based operations. Applications can be developed using Custom integration and development OPTO 22 hands-on customer training classes several common development tools and environments including C or C++, Java, and shell scripts About opto 22 M2M Systems Opto 22 manufactures and develops hardware and software products Machine-to-machine(M2M)systems connect your business computer for industrial automation, remote monitoring, enterprise data acquisition systems to the machines, devices, and environments you want to monitor, and machine-to-machine(M2M)applications. Using standard control, or collect data from. M2M systems often use wireless cellular commercially available Internet, networking, and computer technologies, communications to link remote facilities to central systems over the Internet Opto 22s input/output and control systems allow customers to monitor, or to provide monitoring and control capability via a cellular phone control, and acquire data from all of the mechanical, electrical, and electronic assets that are key to their business operations Opto 22s interface and communications hardware data service plan, and products and services support automation end users, UEMS, and Web portal--in one easy-to-use package. Visit nvio. opto22. com for information technology and operations personnel more information Founded in 19/4 and with over 85million Opto 22-connected devices deployed worldwide, the company has an established reputation for quality and reliability ptc22·43044 Business park drive· temecula,CAg2590-3614· Phone:(951)6953000·800321-0PT0·Fax:(51)6953095·Www.opto2com InsideSales:(800)321-OPTO.ProductSupport:(800)TEK-OPTO.(951)695-3080.Fax:(951)695-3017Email:sales@opto22.comForm1335-050601 @ 2004-2005 Opto 22. All rights reserved All trademarkS, trade names, logos and service marks referenced herein belong to their respective companies