第
45
卷第
2
期
煤
炭
科 学 技 术
Vol. 45 No. 2
2017
年
2
月
Coal Science and Technology
Feb. 2017
安全技术及工程
超大断面单巷超长距离掘进通风技术研究
杨 俊 哲
(
神华神东煤炭集团有限责任公司
,
陕西
榆林
719315)
摘 要
:
为了
配合
8. 8 m
超大采高综采成套装备整体搬运
,
采用大功率
( 2
×
55 kW)
通风机配大直径风
筒
(
直径为
1 200 mm)
局部通风技术解决超大断面
( 6. 0 m
×
5. 8 m) 、
单巷超长距离
( 5 340 m)
掘进需
风量大与供风难的问题
。
通过通风设计确定合理供风量和风压等通风参数
,
据此进行通风机选型
。
为提高通风效率
,
根据工作面通风和环境参数实时测定结果
,
以变频技术动态调整局部通风机频率和
转数
,
使其达到最佳的工况点
,
并通过实施安全技术措施和风筒降阻减漏措施
,
满足了超大断面超长
距离掘进工作面在掘进至不同长度时风量的需求
,
可为服务于超大型高产高效矿井
、
超大盘区
、
工作
面的超长掘进工作面施工的通风配合提供借鉴
。
关键词
:
超大断面掘进工作面
;
局部通风
;
风筒风阻
;
变频通风机
; 8. 8 m
超大采高
中图分类号
: TD72
文献标志码
: A
文章编号
: 0253
-
2336( 2017) 02
-
0065
-
06
Study on ventilation technology of overlong distance heading in
mine over large cross sec t ion single roadway
Yang Junzhe
( Shenhua Shendong Coal Group Corporation Limited,Yulin 719315,China)
Abstract: In order to coordinate the integrated transportation of 8. 8 m high cutting fully mechanized completed equipment,a high power
( 2
×
55 kW) fan local ventilation technology with large diameter ventilation duct ( a diameter of 1 200 mm) was applied to solve the high
ventilation volume and difficult ventilation supply problems in a super long distance ( 5 340 m) heading of a mine single roadway with a
over large cross section ( 6. 0 m
×
5. 8 m) . With the ventilation design,rational air supply volume,air pressure and other ventilation param-
eters were determined and the selection of the ventilator was conducted. In order to improve the ventilation efficiency,according to the real
-
time measured results of the heading face ventilation and environment parameters,the frequency conversion technology was applied to dy-
namically adjust the frequency and revolution of the local fan in order to reach the optimum performance point. Meanwhile with the safety
technical measures and the measures to reduce the air resistance and the air leakage of the ventilation duct conducted,the ventilation vol-
ume requirements of the over large cross section and overlong distance heading face with different length heading were met and could pro-
vide the references to the ventilation coordination of the overlong distance heading face construction for the overlarge high production and
high efficient mine,overlarge mining block and coal mining face.
Key words: over large cross section heading face; local ventilation; air resistance of ventilation duct; frequency conversion ventilator; 8. 8
m over high cutting height
收稿
日期
: 2016
-
12
-
20;
责任编辑
:
杨正凯
DOI: 10. 13199 /j. cnki. cst. 2017. 02. 011
基金项目
:
国家重点基础研究发展计划
( 973
计划
)
资助项目
( 2010CB226801,2010CB226804) ;
国家自然科学基金资助项目
( 51174213)
作者简介
:
杨俊哲
( 1964—) ,
男
,
陕西汉中人
,
教授级高级工程师
,
现任神华神东煤炭集团有限责任公司副总经理兼总工程师
。
引用格式
:
杨俊哲
.
超大断面单巷超长距离掘进通风技术研究
[J].
煤炭科学技术
,2017,45( 2) : 65
-
70.
Y
ang Junzhe. Study on ventilation technology of overlong distance heading in mine over large cross section single roadway[J]. Coal Science and
Technology,2017,45( 2 ) : 65
-
70.
0
引 言
近年
来
,
随着煤矿开采技术突破性发展和机械
化程度的提高
,
采掘设备的体积和质量越来越大
,
为
了实现高效运输采用整体搬运
,
所需巷道断面尺寸
也相应增大
。
上湾煤矿
1
-
2
煤四盘区设计采用
8. 8
56
评论0
最新资源