MS-860 Industrial
Raster Reader
User’s Manual
P/N 83-000860 Rev C
ii MS-860 Industrial Raster Reader User’s Manual
Copyright © 2005
by Microscan Systems, Inc.,
1201 S.W. 7th Street, Renton, Washington, U.S.A. 98055
(425) 226-5700 FAX: (425) 226-8682
ISO 9001/Certification No. 00-1047
All rights reserved. The information contained herein is proprietary and is provided solely for the
purpose of allowing customers to operate and/or service Microscan manufactured equipment
and is not to be released, reproduced, or used for any other purpose without written permission
of Microscan.
Throughout this manual, trademarked names might be used. Rather than put a trademark (™)
symbol in every occurrence of a trademarked name, we state herein that we are using the
names only in an editorial fashion, and to the benefit of the trademark owner, with no intention
of infringement.
Disclaimer
The information and specifications described in this manual are subject to change without
notice.
Latest Manual Version
For the latest version of this manual, see the Download page on our web site at
www.microscan.com/downloadcenter
For technical support email helpdesk@microscan.com
Microscan Systems, Inc.
1201 S.W. Seventh Street
Renton, Washington 98055
U.S.A.
Tel: 425 226 5700
Fax: 425 226 8250
helpdesk@microscan.com
Microscan Europe
Tel: 31 172 423360
Fax: 31 172 423366
Microscan Asia Pacific R.O.
Tel: 65 6846 1214
Fax: 65 6846 4641
MS-860 Industrial Raster Reader User’s Manual iii
Table of Contents
Chapter 1 Quick Start
Step 1 Connect the System.....................................................................1-2
Step 2 Install ESP.................................................................................... 1-3
Step 3 Select Reader Model.................................................................... 1-4
Step 4 Autoconnect .................................................................................1-5
Step 5 Position Symbol and Reader........................................................ 1-6
Step 6 Test for Read Rate....................................................................... 1-7
Step 7 Calibrate the Reader .................................................................... 1-8
Step 8 Configure the Reader ................................................................... 1-9
Chapter 2 Using ESP
EZ Mode .................................................................................................. 2-2
Application Mode ..................................................................................... 2-3
Pulldown Menus ...................................................................................... 2-4
Connect Menu ......................................................................................... 2-9
View...................................................................................................... 2-11
Navigating in ESP.................................................................................. 2-12
Send/Receive Options........................................................................... 2-12
Chapter 3 EZ Button
EZ Button by ESP.................................................................................... 3-2
EZ Button by Serial Command ................................................................ 3-2
EZ Button Operation................................................................................3-3
EZ Button Modes..................................................................................... 3-4
EZ Button Options ...................................................................................3-6
Chapter 4 Calibration
Calibration by ESP .................................................................................. 4-2
Calibration by Serial Command............................................................... 4-2
Calibration Overview ............................................................................... 4-3
Calibrating a Symbol ............................................................................... 4-4
Calibration Dialog ....................................................................................4-5
Calibration Options .................................................................................. 4-6
Chapter 5 Configuration Database
Configuration by ESP ..............................................................................5-2
Configuration by Serial Command........................................................... 5-2
Overview of Configuration Database....................................................... 5-2
Setup for Configuration Database ........................................................... 5-3
Operation of Database ............................................................................5-4
Save Current Settings to Database ......................................................... 5-7
Load Current Settings to Database ......................................................... 5-7
Table of Contents
iv MS-860 Industrial Raster Reader User’s Manual
Chapter 6 Communications
Communications by ESP......................................................................... 6-2
Communications by Serial Command ..................................................... 6-2
RS-232/422 Host Port ............................................................................. 6-3
RS-232 Auxiliary Port .............................................................................. 6-8
Auxiliary Port System Data.................................................................... 6-18
Preamble ............................................................................................... 6-19
Postamble ............................................................................................. 6-20
LRC Status ............................................................................................ 6-21
Response Timeout ................................................................................ 6-22
Chapter 7 Read Cycle
Read Cycle by ESP................................................................................. 7-2
Read Cycle by Serial Command ............................................................. 7-3
Multisymbol ............................................................................................. 7-4
Trigger ..................................................................................................... 7-6
Serial Trigger......................................................................................... 7-12
End of Read Cycle ................................................................................ 7-14
Decodes Before Output......................................................................... 7-16
Reader Setup ........................................................................................ 7-17
Laser Setup ........................................................................................... 7-22
Raster Setup ......................................................................................... 7-22
Chapter 8 Raster/Laser
Raster/Laser Setup by ESP .................................................................... 8-2
Raster/Laser Setup by Serial Command ................................................. 8-2
Raster Setup ........................................................................................... 8-3
Laser Setup ............................................................................................. 8-6
Chapter 9 Symbologies
Symbologies by ESP............................................................................... 9-2
Symbologies by Serial Command ........................................................... 9-3
1D Symbologies ...................................................................................... 9-4
Stacked Symbologies............................................................................ 9-26
Narrow Margins ..................................................................................... 9-29
Symbology ID ........................................................................................ 9-30
Background Color.................................................................................. 9-31
Autodiscriminate.................................................................................... 9-31
Chapter 10 I/O Parameters
I/O Parameters by ESP ......................................................................... 10-2
I/O Parameters by Serial Command ..................................................... 10-3
Symbol Data Output .............................................................................. 10-4
Noread Message ................................................................................... 10-7
Bad Symbol Message ........................................................................... 10-8
No Symbol Message ............................................................................. 10-9
Output Indicators ................................................................................. 10-10
MS-860 Industrial Raster Reader User’s Manual v
Serial Verification................................................................................. 10-12
EZ Button.............................................................................................10-14
Input..................................................................................................... 10-15
Output 1...............................................................................................10-16
Output 2...............................................................................................10-23
Output 3...............................................................................................10-24
Quality Output...................................................................................... 10-25
Database Number Output....................................................................10-26
Symbol Position Output ....................................................................... 10-27
Read Duration Output..........................................................................10-30
Chapter 11 Matchcode
Matchcode by ESP ................................................................................11-2
Matchcode by Serial Command ............................................................11-2
Overview of Matchcode ......................................................................... 11-3
Using Master Symbols........................................................................... 11-3
Matchcode Type .................................................................................... 11-4
Sequential Matching .............................................................................. 11-5
Match Start Position .............................................................................. 11-6
Match Length......................................................................................... 11-7
Wild Card Character .............................................................................. 11-8
Sequence on Noread............................................................................. 11-9
Sequence on Mismatch ....................................................................... 11-10
Sequence Step .................................................................................... 11-11
New Master Pin ................................................................................... 11-11
Match Replace..................................................................................... 11-12
Mismatch Replace ............................................................................... 11-13
Chapter 12 Diagnostics
Diagnostics by ESP ............................................................................... 12-2
Diagnostics by Serial Command ........................................................... 12-2
Diagnostic Messages Overview ............................................................ 12-3
Counts ................................................................................................... 12-4
Hours Since Last Reset......................................................................... 12-6
Laser High .............................................................................................12-7
Laser Low .............................................................................................. 12-8
High Temperature.................................................................................. 12-9
Low Temperature .................................................................................. 12-9
Service Message ................................................................................. 12-10
Chapter 13 Output Format
Output Format by ESP .......................................................................... 13-2
Output Format by Serial Command.......................................................13-2
Output Format Overview ....................................................................... 13-3
Extraction Mode..................................................................................... 13-4
Insertion Mode....................................................................................... 13-6
Multisymbol Output Format Status ........................................................ 13-8
Ordered Output.................................................................................... 13-10