/******************************************************************************
FILE : datapage.c
PURPOSE : paged data access runtime routines
MACHINE : Freescale 68HC12 (Target)
LANGUAGE : ANSI-C
HISTORY : 21.7.96 first version created
******************************************************************************/
#include "hidef.h"
#include "non_bank.sgm"
#include "runtime.sgm"
/*lint --e{957} , MISRA 8.1 REQ, these are runtime support functions and, as such, are not meant to be called in user code; they are only invoked via jumps, in compiler-generated code */
/*lint -estring(553, __OPTION_ACTIVE__) , MISRA 19.11 REQ , __OPTION_ACTIVE__ is a built-in compiler construct to check for active compiler options */
#ifndef __HCS12X__ /* it's different for the HCS12X. See the text below at the #else // __HCS12X__ */
/*
According to the -Cp option of the compiler the
__DPAGE__, __PPAGE__ and __EPAGE__ macros are defined.
If none of them is given as argument, then no page accesses should occur and
this runtime routine should not be used !
To be on the save side, the runtime routines are created anyway.
*/
/* Compile with option -DHCS12 to activate this code */
#if defined(HCS12) || defined(_HCS12) || defined(__HCS12__)
#ifndef PPAGE_ADDR
#ifdef __PPAGE_ADR__
#define PPAGE_ADDR __PPAGE_ADR__
#else
#define PPAGE_ADDR (0x30 + REGISTER_BASE)
#endif
#endif
#ifndef __PPAGE__ /* may be set already by option -CPPPAGE */
#define __PPAGE__
#endif
/* Compile with option -DDG128 to activate this code */
#elif defined DG128 /* HC912DG128 derivative has PPAGE register only at 0xFF */
#ifndef PPAGE_ADDR
#define PPAGE_ADDR (0xFF+REGISTER_BASE)
#endif
#ifndef __PPAGE__ /* may be set already by option -CPPPAGE */
#define __PPAGE__
#endif
#elif defined(HC812A4)
/* all setting default to A4 already */
#endif
#if !defined(__EPAGE__) && !defined(__PPAGE__) && !defined(__DPAGE__)
/* as default use all page registers */
#define __DPAGE__
#define __EPAGE__
#define __PPAGE__
#endif
/* modify the following defines to your memory configuration */
#define EPAGE_LOW_BOUND 0x400u
#define EPAGE_HIGH_BOUND 0x7ffu
#define DPAGE_LOW_BOUND 0x7000u
#define DPAGE_HIGH_BOUND 0x7fffu
#define PPAGE_LOW_BOUND (DPAGE_HIGH_BOUND+1u)
#define PPAGE_HIGH_BOUND 0xBFFFu
#ifndef REGISTER_BASE
#define REGISTER_BASE 0x0u
#endif
#ifndef DPAGE_ADDR
#define DPAGE_ADDR (0x34u+REGISTER_BASE)
#endif
#ifndef EPAGE_ADDR
#define EPAGE_ADDR (0x36u+REGISTER_BASE)
#endif
#ifndef PPAGE_ADDR
#define PPAGE_ADDR (0x35u+REGISTER_BASE)
#endif
/*
The following parts about the defines are assumed in the code of _GET_PAGE_REG :
- the memory region controlled by DPAGE is above the area controlled by the EPAGE and
below the area controlled by the PPAGE.
- the lower bound of the PPAGE area is equal to be the higher bound of the DPAGE area + 1
*/
#if (EPAGE_LOW_BOUND >= EPAGE_HIGH_BOUND) || (EPAGE_HIGH_BOUND >= DPAGE_LOW_BOUND) || (DPAGE_LOW_BOUND >= DPAGE_HIGH_BOUND) || (DPAGE_HIGH_BOUND >= PPAGE_LOW_BOUND) || (PPAGE_LOW_BOUND >= PPAGE_HIGH_BOUND)
#error /* please adapt _GET_PAGE_REG for this non default page configuration */
#endif
#if (DPAGE_HIGH_BOUND+1u) != PPAGE_LOW_BOUND
#error /* please adapt _GET_PAGE_REG for this non default page configuration */
#endif
/* this module does either control if any access is in the bounds of the specified page or */
/* ,if only one page is specified, just use this page. */
/* This behavior is controlled by the define USE_SEVERAL_PAGES. */
/* If !USE_SEVERAL_PAGES does increase the performance significantly */
/* NOTE : When !USE_SEVERAL_PAGES, the page is also set for accesses outside of the area controlled */
/* by this single page. But this is should not cause problems because the page is restored to the old value before any other access could occur */
#if !defined(__DPAGE__) && !defined(__EPAGE__) && !defined(__PPAGE__)
/* no page at all is specified */
/* only specifying the right pages will speed up these functions a lot */
#define USE_SEVERAL_PAGES 1
#elif (defined(__DPAGE__) && defined(__EPAGE__)) || (defined(__DPAGE__) && defined(__PPAGE__)) || (defined(__EPAGE__) && defined(__PPAGE__))
/* more than one page register is used */
#define USE_SEVERAL_PAGES 1
#else
#define USE_SEVERAL_PAGES 0
#if defined(__DPAGE__) /* check which pages are used */
#define PAGE_ADDR PPAGE_ADDR
#elif defined(__EPAGE__)
#define PAGE_ADDR EPAGE_ADDR
#elif defined(__PPAGE__)
#define PAGE_ADDR PPAGE_ADDR
#else /* we do not know which page, decide it at runtime */
#error /* must not happen */
#endif
#endif
#if USE_SEVERAL_PAGES /* only needed for several pages support */
/*--------------------------- _GET_PAGE_REG --------------------------------
Runtime routine to detect the right register depending on the 16 bit offset part
of an address.
This function is only used by the functions below.
Depending on the compiler options -Cp different versions of _GET_PAGE_REG are produced.
Arguments :
- Y : offset part of an address
Result :
if address Y is controlled by a page register :
- X : address of page register if Y is controlled by an page register
- Zero flag cleared
- all other registers remain unchanged
if address Y is not controlled by a page register :
- Zero flag is set
- all registers remain unchanged
--------------------------- _GET_PAGE_REG ----------------------------------*/
#if defined(__DPAGE__)
#ifdef __cplusplus
extern "C"
#endif
#pragma NO_ENTRY
#pragma NO_EXIT
#pragma NO_FRAME
static void NEAR _GET_PAGE_REG(void) { /*lint -esym(528, _GET_PAGE_REG) used in asm code */
asm {
L_DPAGE:
CPY #DPAGE_LOW_BOUND ;/* test of lower bound of DPAGE */
#if defined(__EPAGE__)
BLO L_EPAGE ;/* EPAGE accesses are possible */
#else
BLO L_NOPAGE ;/* no paged memory below accesses */
#endif
CPY #DPAGE_HIGH_BOUND ;/* test of higher bound DPAGE/lower bound PPAGE */
#if defined(__PPAGE__)
BHI L_PPAGE ;/* EPAGE accesses are possible */
#else
BHI L_NOPAGE ;/* no paged memory above accesses */
#endif
FOUND_DPAGE:
LDX #DPAGE_ADDR ;/* load page register address and clear zero flag */
RTS
#if defined(__PPAGE__)
L_PPAGE:
CPY #PPAGE_HIGH_BOUND ;/* test of higher bound of PPAGE */
BHI L_NOPAGE
FOUND_PPAGE:
LDX #PPAGE_ADDR ;/* load page register address and clear zero flag */
RTS
#endif
#if defined(__EPAGE__)
L_EPAGE:
CPY #EPAGE_LOW_BOUND ;/* test of lower bound of EPAGE */
BLO L_NOPAGE
CPY #EPAGE_HIGH_BOUND ;/* test of higher bound of EPAGE */
BHI L_NOPAGE
FOUND_EPAGE:
LDX #EPAGE_ADDR ;/* load page register address and clear zero flag */
RTS
#endif
L_NOPAGE:
ORCC #0x04 ;/* sets zero flag */
RTS
}
}
#else /* !defined(__DPAGE__) */
#if defined( __PPAGE__ )
#ifdef __cplusplus
extern "C"
#endif
#pragma NO_ENTRY
#pragma NO_EXIT
#pragma NO_FRAME
static void NEAR _GET_PAGE_REG(void) { /*lint -esym(528, _GET_PAGE_REG) used in asm code */
asm {
L_PPAGE:
CPY #PPAGE_LOW_BOUND ;/* test of lower bound of PPAGE */
#if defined( __EPAGE__ )
BLO L_EPAGE
#else
BLO L_NOPAGE ;/* no paged memory below */
#endif
CPY #PPAGE_HIGH_BOUND ;/* test of higher bound PPAGE */
BHI L_NOPAGE
FOUND_PPAGE:
LDX #PPAGE_ADDR ;/* load page register address and clear zero flag */
RTS
#if defined( __EPAGE__ )
L_EPAGE:
CPY #EPAGE_LOW_BOUND ;/* test of lower bound of EPAGE */
没有合适的资源?快使用搜索试试~ 我知道了~
飞思卡尔 MC9S12XEP100 App Demo(用于Bootloader刷写程序)
共51个文件
h:11个
c:11个
o:8个
1星 需积分: 48 68 下载量 138 浏览量
2020-01-03
20:48:15
上传
评论 6
收藏 362KB 7Z 举报
温馨提示
飞思卡尔 MC9S12XEP100 App Demo,用于Bootloader刷写程序测试,生成s19文件可用上位机刷写测试
资源推荐
资源详情
资源评论
收起资源包目录
UserApp_GPIO.7z (51个子文件)
UserApp_GPIO
UserApp_GPIO.mcp 61KB
bin
Project.abs 411KB
Project.abs.glo 1KB
Project.map 235KB
Project.abs.s19 1KB
Sources
main.c 901B
Typedefs.h 3KB
datapage.c 68KB
Start12.c 23KB
McuDrivers
SPI
spi.h 2KB
spi.c 4KB
XGATE
xgate_init.c 2KB
xgate.cxgate 7KB
xgate.h 460B
xgate_init.h 207B
GPIO
gpio.c 8KB
gpio.h 702B
Flash
flash.c 15KB
flash.h 790B
CAN
CAN.c 23KB
CAN.h 1KB
ISR
isr.c 9KB
PIT
pit_isr.h 153B
pit.h 254B
pit_isr.cxgate 2KB
pit.c 2KB
SYSTEM
System.c 4KB
System.h 170B
derivative.h 264B
C_Layout.hwl 855B
Default.mem 161B
prm
Project.prm 13KB
burner.bbl 10KB
P&E_Multilink_USB.ini 1KB
cmd
P&E_Multilink_USB_Vppon.cmd 78B
P&E_Multilink_USB_Preload.cmd 60B
P&E_Multilink_USB_Erase_unsecure_hcs12xe.cmd 1KB
P&E_Multilink_USB_Reset.cmd 60B
P&E_Multilink_USB_Startup.cmd 59B
P&E_Multilink_USB_Postload.cmd 59B
P&E_Multilink_USB_Vppoff.cmd 77B
UserApp_GPIO_Data
Standard
ObjectCode
main.c.o 7KB
flash.c.o 16KB
gpio.c.o 22KB
Start12.c.o 6KB
CAN.c.o 28KB
System.c.o 9KB
datapage.c.o 14KB
MC9S12XEP100.c.o 406KB
TargetDataWindows.tdt 1.49MB
CWSettingsWindows.stg 4KB
共 51 条
- 1
资源评论
- yaowen16122022-01-06卵用都没的
Beatfan_N
- 粉丝: 677
- 资源: 28
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- 默写49个过程、查看工具与技术
- (资源包名是松下不必介意实际是台达)台达PLC例程源码污水处理(台达PLC+触摸屏程序)
- 开唛K歌(沫沫VIP会员版)无限唱_2.1.5_新稳定版.apk
- (资源包名是松下不必介意实际是台达)台达PLC例程源码台达与丹佛斯fc51modbus通信程序带注解
- (资源包名是松下不必介意实际是台达)台达PLC例程源码台达霓虹灯循环程序
- 多种液体自动混合系统.mwp
- (资源包名是松下不必介意实际是台达)台达PLC例程源码台达例程序
- (资源包名是松下不必介意实际是台达)台达PLC例程源码台达程序
- (资源包名是松下不必介意实际是台达)台达PLC例程源码台达PLC与英威腾变频器的通讯控制
- 微服务开发各种注册中心对比
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功