RFC1213-MIB DEFINITIONS ::= BEGIN
IMPORTS
mgmt, NetworkAddress, IpAddress, Counter, Gauge,
TimeTicks
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212;
-- This MIB module uses the extended OBJECT-TYPE macro as
-- defined in [14];
-- MIB-II (same prefix as MIB-I)
mib-2 OBJECT IDENTIFIER ::= { mgmt 1 }
-- textual conventions
DisplayString ::=
OCTET STRING
-- This data type is used to model textual information taken
-- from the NVT ASCII character set. By convention, objects
-- with this syntax are declared as having
--
-- SIZE (0..255)
PhysAddress ::=
OCTET STRING
-- This data type is used to model media addresses. For many
-- types of media, this will be in a binary representation.
-- For example, an ethernet address would be represented as
-- a string of 6 octets.
-- groups in MIB-II
system OBJECT IDENTIFIER ::= { mib-2 1 }
interfaces OBJECT IDENTIFIER ::= { mib-2 2 }
at OBJECT IDENTIFIER ::= { mib-2 3 }
ip OBJECT IDENTIFIER ::= { mib-2 4 }
icmp OBJECT IDENTIFIER ::= { mib-2 5 }
tcp OBJECT IDENTIFIER ::= { mib-2 6 }
udp OBJECT IDENTIFIER ::= { mib-2 7 }
egp OBJECT IDENTIFIER ::= { mib-2 8 }
-- historical (some say hysterical)
-- cmot OBJECT IDENTIFIER ::= { mib-2 9 }
transmission OBJECT IDENTIFIER ::= { mib-2 10 }
snmp OBJECT IDENTIFIER ::= { mib-2 11 }
-- the System group
-- Implementation of the System group is mandatory for all
-- systems. If an agent is not configured to have a value
-- for any of these variables, a string of length 0 is
-- returned.
sysDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A textual description of the entity. This value
should include the full name and version
identification of the system's hardware type,
software operating-system, and networking
software. It is mandatory that this only contain
printable ASCII characters."
::= { system 1 }
sysObjectID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The vendor's authoritative identification of the
network management subsystem contained in the
entity. This value is allocated within the SMI
enterprises subtree (1.3.6.1.4.1) and provides an
easy and unambiguous means for determining `what
kind of box' is being managed. For example, if
vendor `Flintstones, Inc.' was assigned the
subtree 1.3.6.1.4.1.4242, it could assign the
identifier 1.3.6.1.4.1.4242.1.1 to its `Fred
Router'."
::= { system 2 }
sysUpTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time (in hundredths of a second) since the
network management portion of the system was last
re-initialized."
::= { system 3 }
sysContact OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The textual identification of the contact person
for this managed node, together with information
on how to contact this person."
::= { system 4 }
sysName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An administratively-assigned name for this
managed node. By convention, this is the node's
fully-qualified domain name."
::= { system 5 }
sysLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The physical location of this node (e.g.,
`telephone closet, 3rd floor')."
::= { system 6 }
sysServices OBJECT-TYPE
SYNTAX INTEGER (0..127)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A value which indicates the set of services that
this entity primarily offers.
The value is a sum. This sum initially takes the
value zero, Then, for each layer, L, in the range
1 through 7, that this node performs transactions
for, 2 raised to (L - 1) is added to the sum. For
example, a node which performs primarily routing
functions would have a value of 4 (2^(3-1)). In
contrast, a node which is a host offering
application services would have a value of 72
(2^(4-1) + 2^(7-1)). Note that in the context of
the Internet suite of protocols, values should be
calculated accordingly:
layer functionality
1 physical (e.g., repeaters)
2 datalink/subnetwork (e.g., bridges)
3 internet (e.g., IP gateways)
4 end-to-end (e.g., IP hosts)
7 applications (e.g., mail relays)
For systems including OSI protocols, layers 5 and
6 may also be counted."
::= { system 7 }
-- the Interfaces group
-- Implementation of the Interfaces group is mandatory for
-- all systems.
ifNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of network interfaces (regardless of
their current state) present on this system."
::= { interfaces 1 }
-- the Interfaces table
-- The Interfaces table contains information on the entity's
-- interfaces. Each interface is thought of as being
-- attached to a `subnetwork'. Note that this term should
-- not be confused with `subnet' which refers to an
-- addressing partitioning scheme used in the Internet suite
-- of protocols.
ifTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of interface entries. The number of
entries is given by the value of ifNumber."
::= { interfaces 2 }
ifEntry OBJECT-TYPE
SYNTAX IfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An interface entry containing objects at the
subnetwork layer and below for a particular
interface."
INDEX { ifIndex }
::= { ifTable 1 }
IfEntry ::=
SEQUENCE {
ifIndex
INTEGER,
ifDescr
DisplayString,
ifType
INTEGER,
ifMtu
INTEGER,
ifSpeed
Gauge,
ifPhysAddress
PhysAddress,
ifAdminStatus
INTEGER,
ifOperStatus
INTEGER,
ifLastChange
TimeTicks,
ifInOctets
Counter,
ifInUcastPkts
Counter,
ifInNUcastPkts
Counter,
ifInDiscards
Counter,
ifInErrors
Counter,
ifInUnknownProtos
Counter,
ifOutOctets
Counter,
ifOutUcastPkts
Counter,
ifOutNUcastPkts
Counter,
ifOutDiscards
Counter,
ifOutErrors
Counter,
ifOutQLen
Gauge,
ifSpecific
OBJECT IDENTIFIER
}
ifIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each interface. Its value
ranges between 1 and the value of ifNumber. The
value for each interface must remain constant at
least from one re-initialization of the entity's
network management system to the next re-
initialization."
::= { ifEntry 1 }
ifDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DE
没有合适的资源?快使用搜索试试~ 我知道了~
mib 文件库(我自己在网上收集并放在一起)
共77个文件
my:18个
txt:18个
mib:11个
需积分: 45 24 下载量 141 浏览量
2014-08-29
11:30:28
上传
评论
收藏 762KB ZIP 举报
温馨提示
mib 文件库(我自己在网上收集并放在一起)
资源推荐
资源详情
资源评论
收起资源包目录
mibs.zip (77个子文件)
mibs
JUNIPER-SMI 9KB
ISIS-MIB.mib 146KB
JUNIPER-JS-SMI.mib 2KB
MIB-Dell-10892 605KB
RFC1406-MIB.my 55KB
NETAPP-MIB 940KB
RFC-1215.txt 1KB
NET-SNMP-MIB.txt 2KB
CISCO-TC.my 91KB
root_mib.txt 633B
CISCO-ST-TC.my 17KB
RFC1269-MIB.txt 10KB
CPQHLTH-MIB 205KB
OPMANAGER-MIB 5KB
RFC1398-MIB.my 22KB
CISCO-RTTMON-MIB 302KB
RFC1315-MIB.my 21KB
RFC-1212.txt 3KB
IANAifType-MIB.txt 29KB
HOST-RESOURCES-MIB 50KB
RFC1213-MIB 101KB
SONUS-COMMON-MIB.txt 24KB
Clavister-MIB.mib 70KB
SNMPv2-CONF.txt 8KB
RFC1229-MIB.my 21KB
JUNIPER-IF-MIB.mib 17KB
RFC1213-MIB.txt 78KB
CISCO-ENVMON-MIB 36KB
RFC1155-SMI.txt 3KB
Clavister-SMI.mib 2KB
SNMPv2-SMI 2KB
Printer-MIB 133KB
CISCO-RTTMON-TC-MIB.my 26KB
CISCO-VSAN-MIB.my 62KB
RFC1315-MIB 21KB
CPQSINFO-MIB 140KB
BRIDGE-MIB 46KB
CPQHOST-MIB 89KB
APPLICATION-MIB 15KB
JUNIPER-MIB 65KB
RFC1158-MIB 52KB
RFC1231-MIB.my 39KB
RDBMS-MIB 46KB
IF-MIB-BAD.txt 70KB
SNMP-FRAMEWORK-MIB.my 22KB
CISCO-SMI.my 16KB
CPQSTSYS-MIB 132KB
JUNIPER-LSYS-SECURITYPROFILE-MIB.mib 2KB
JUNIPER-SMI.mib 8KB
RFC1285-MIB.my 78KB
ORADB-MIB 30KB
RFC1243-MIB.my 41KB
SNMPv2-TC.txt 37KB
INET-ADDRESS-MIB.txt 16KB
DIFFSERV-DSCP-TC.mib 2KB
SNMPv2-SMI.txt 9KB
DELL-RAC-MIB 45KB
SNMPv2-TM 4KB
SNMPv2-TC 38KB
RFC1271-MIB.my 145KB
RFC1382-MIB.my 113KB
RFC1213-MIB.my 100KB
RFC1253-MIB.my 52KB
oracle-database.mib 46KB
INTEGRATED-SERVICES-MIB.mib 27KB
CISCO-MIB 128KB
RFC1215-TRAP 3KB
IF-MIB.txt 70KB
mib_core.txt 7KB
CPQSTDEQ-MIB 178KB
RFC1381-MIB.my 42KB
SNMP-FRAMEWORK-MIB.txt 22KB
DIFFSERV-MIB.mib 128KB
RFC1155-SMI 717B
SNMPv2-MIB.txt 29KB
StorageManagement-MIB 157KB
MSSQL-MIB 26KB
共 77 条
- 1
资源评论
仦石頭
- 粉丝: 12
- 资源: 46
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功