Readme - Hello World Software Example
DESCRIPTION:
Simple program that prints "Hello from Nios II"
REQUIREMENTS:
This example will run on the following Nios II designs, targeting the Nios
Stratix & Cyclone development boards:
- Standard
- Full Featured
- Fast
- Low Cost
The memory footprint of this hosted application is ~69 kbytes by default
using the standard reference deisgn.
For a reduced footprint version of this template, and an explanation of how
to reduce the memory footprint for a given application, see the
"small_hello_world" template.
PERIPHERALS USED:
This example exercises the following peripherals:
- STDOUT device (UART or JTAG UART)
SOFTWARE SOURCE FILES:
This example includes the following software source files:
- hello_world.c: Everyone needs a Hello World program, right?
BOARD/HOST REQUIREMENTS:
This example requires only a JTAG connection with a Nios Development board. If
the host communication settings are changed from JTAG UART (default) to use a
conventional UART, a serial cable between board DB-9 connector and the host is
required.
没有合适的资源?快使用搜索试试~ 我知道了~
温馨提示
SD卡和AIC23数字音频输出实验, FreeDev Audio Dsp Board采用了TI公司的TVL320AIC23 1、控制接口使用I2C,Quartus中将CS置低(器件地址0011010)。 2、数字音频接口使用了组件FreeDev_aic23,有三种测试和应用 模式,中断结合DMA方式能在NIOS II中采集和发送数据。中断信号 产生于模块中FIFO缓冲区的半满信号,读取数据端口自动清除中断 请求信号。 3、I2C IP 和FreeDev_aic23 IP分别在Quartus 工程目录中 4、SD卡读写通过SD_DAT0、SD_CLK、SD_CMD三个PIO信号线用软件 控制时序。 5、该范例读SD卡数据,通过DMA将Buffer数据送到FreeDev_aic23的 FIFO中实现数据播放。 6、SD卡中的数据必须是以48K*16bit保存的采样数据。数据可以通过SD读卡器写入。
资源推荐
资源详情
资源评论
收起资源包目录
73462708sd_audio_aic23.rar (12个子文件)
sd_audio_aic23
fast_dma.c 5KB
fast_dma.h 497B
i2c.c 8KB
aic23_lib.c 8KB
sd_audio_aic23.c 3KB
tlv320aic23.h 6KB
Debug
basic_io.h 1KB
i2c_master.h 3KB
readme.txt 1KB
SD_Card.h 6KB
menu.c 3KB
www.pudn.com.txt 218B
共 12 条
- 1
Lix_fatsnow
- 粉丝: 2
- 资源: 26
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功
- 1
- 2
前往页