sundance st201 网卡驱动 通用的

Tenda Tel8139d Based Fast Ethernet 10/100 Adapter Novell ODI Server Driver Contents: --------- 1. File Description 2. Driver Installation for NetWare Server 3. Parameters Description 1. File Description ------------------- Filename Description ================= ===================================================== README.TXT Presents a summary of the contents for NetWare Server driver installation. ST201.LAN ST201 based 32-bit ODI Driver This driver complies with NetWare ODI Server driver SPEC 3.00. ST201.LDI The ST201 driver installation file for Netware 6.x/ Netware 5.x/Netware 4.x. 2. Driver Installation for NetWare Server ----------------------------------------- ** Driver Installation for NetWare Server 4.X ** a. Update Netware Server to 4.2 . (If don't update to 4.2, use diskette update file "MSM.NLM, ETHERTSM.NLM") b. Run NetWare Server System . c. When the Server prompt appears, load the NetWare Server Installation Utility ==> "LOAD INSTALL" d. Select "Driver options" from the "Installtion Options" menu. e. Select "Configure network drivers" from the "Driver Options" menu. f. Select "Select a driver" from the "Additional Driver Actions" menu g. Press <Ins> to install a unlisted driver, then press <F3> to specify a different path. h. Insert Driver Diskette in your PC's floppy drive and specify the path A:\NOVELL\SERVER. i. Select "ST201.LAN" from the "Select a driver to install:" menu. j. If necessary, select "Select/Modify driver parameters and protocols" from the "Board ST201_3 (Driver ST201) Actions" memu. k. Follow instructions to complete driver installation. ** Driver Installation for NetWare Server 5.X/6.X ** a. Run NetWare Server System . b. When the Server prompt appears, load the NetWare Server Installation Utility ==> "LOAD NWCONFIG" c. Select "Driver options" from the "Installtion Options" menu. d. Select "Configure network drivers" from the "Driver Options" menu. e. Select "Select a driver" from the "Additional Driver Actions" menu f. Press <Ins> to install a unlisted driver, then press <F3> to specify a different path. g. Insert Driver Diskette in your PC's floppy drive and specify the path A:\NOVELL\SERVER. h. Select "ST201.LAN" from the "Select a driver to install:" menu. i. If necessary, select "Select/Modify driver parameters and protocols" from the "Board ST201_3 (Driver ST021) Actions" memu. j. Follow instructions to complete driver installation. Sample AUTOEXEC.NCF for NetWare Server AUTOEXEC.NCF (one board) ======================== LOAD ST201 SLOT=2 FRAME=ETHERNET_802.2 NAME=IP100_8022 LOAD ST201 SLOT=2 FRAME=ETHERNET_802.3 NAME=IP100_8023 LOAD ST201 SLOT=2 FRAME=ETHERNET_II NAME=IP100_II LOAD ST201 SLOT=2 FRAME=ETHERNET_SNAP NAME=IP100_SNAP BIND IPX IP100_8022 NET=10 BIND IPX IP100_8023 NET=20 BIND IPX IP100_II NET=30 BIND IPX IP100_SNAP NET=40 3. Parameter Description ------------------------ The following parameters are used in ST201.LAN. a. SLOT : Specifies which adapter is enabled when multiple ST201 based adapters are found in your computer. Ex: LOAD ST201 SLOT=3 FRAME=ETHERNET_802.2 LOAD ST201 SLOT=4 FRAME=ETHERNET_II b. FRAME : Specifies which frame type is used by the driver. Accepted values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and Ethernet_SNAP. Ex: LOAD ST201 FRAME=ETHERNET_802.2 LOAD ST201 FRAME=ETHERNET_802.3 LOAD ST201 FRAME=ETHERNET_II LOAD ST201 FRAME=ETHERNET_SNAP