D-LINK驱动D-LINK驱动

D-Link DFE-530TX PCI Fast Ethernet Adapter Packet Driver Installation Overview User's Guide ------------ File Description ------------ ---------------------------------------------------- PCNFS.TXT Sun PC-NFS installation document PCTCP.TXT FTP PC/TCP installation document PDIPX.TXT IPX SHELL installation document NCSA.TXT NCSA installation document WINSOCK.TXT Winsock installation document The following syntax keywords are for driver v4.10 or latter only. ------------------------------------------------------------------- Installation Packet Driver: ---------------------------- 1) Copy the Packet driver to your HardDisk, suppose you copy it to C:\PACKET directory. EX: copy a:\packet\dlkfet.com c:\packet\dlkfet.com 2) Add the following line to C:\AUTOEXEC.BAT C:\PACKET\DLKFET -n 0x60 or 1) Copy the Packet driver to your HardDisk, suppose you copy it to C:\PACKET directory. EX: copy a:\packet\dlkfet.sys c:\packet\dlkfet.sys 2) Add the following line to C:\CONFIG.SYS DEVICE=C:\PACKET\DLKFET.SYS -n 0x60 Sample of configuration file: ---------------------------------------------------------------- (Suppose PACKET driver is copied to C:\PACKET directory) File Name: C:\AUTOEXEC.BAT ---------- C:\PACKET\DLKFET -n -w 0x60 0x60 is software vector number this driver uses. -n means Novell packets can be transmitted across this driver -w means Window compatible. if you want to link to N-way Device and use auto mode, you can add parameter as follow: C:\PACKET\DLKFET -a -n0x60 if you want to force assigning pci slot number you can add parameter as follow: C:\PACKET\DLKFET -l10 -n 0x60 (pci slot number=10) if you want to set up your connection type, you can add parameter as follow: C:\PACKET\DLKFET -connectiontype=autosense 0x60 (Auto mode, default value) C:\PACKET\DLKFET -connectiontype=10baset 0x60 (speed=10Mbs, halfduplex) C:\PACKET\DLKFET -connectiontype=10basetfd 0x60 (speed=10Mbs, fullduplex) C:\PACKET\DLKFET -connectiontype=100basetx 0x60 (speed=100Mbs, halfduplex) C:\PACKET\DLKFET -connectiontype=100basetxfd 0x60 (speed=100Mbs, fullduplex) if you want to set up your flow control ability, you can add parameter as follow: C:\PACKET\DLKFET -flow_control=hardware_default 0x60 (use hardware value, default) C:\PACKET\DLKFET -flow_control=enable 0x60 (enable flow control) C:\PACKET\DLKFET -flow_control=disable 0x60 (disable flow control) if you want to use installable device driver (dlkfet.sys), you should add these configuration in CONFIG.SYS and add "DEVICE=" before "C:\PACKET\DLKFET". The following syntax and keywords are for driver v4.10 previously(v4.10 not included). -------------------------------------------------------------------------------------- syntax: DEVICE = DLKFET.SYS [/option] <packet_int_no> DLKFET.COM [/option] <packet_int_no> Parameters: <packet_int_no> is the software interrupt vector number used by the packet driver program, which can be from 96 to 128. Note: <packet_int_no> can be hex or decimal number. hex - start with '0x'. ex. >DLKFET 0x62 dec - start with nonzero digit. ex. >DLKFET 98 </slot=##> is the number of assigned slot, which is from 1 to f. Note: '##' can be hex number only. ex:>DLKFET /slot=1 >DLKFET /slot=2 >DLKFET /slot=f </d> Delay Initial - The driver program will not initialize the network interface card until the packet driver program is accessed by its upper layer program first time. </w> the /w parameter is used only in the Windows environment. </u> unload the driver program from memory. The program will automatically search for Packet driver to unload. </n> NetWare conversion To select media type, you can use : </autosense> this is the default setting. It let you be able to change media without restart the driver. </100BaseTXFD> Force the driver to select 100Mbps full duplex mode. </100BaseTX> Force the driver to select 100Mbps half duplex mode. </10BaseTFD> Force the driver to select 10Mbps full duplex mode. </10BaseT> Force the driver to select 10Mbps half duplex mode. </flow_control> Set flow_control function.