MSP430 TI 官方C语言例程代码

File Name Description ---------------------------------------------------------------------------------------- fet140_1.c Software Toggle P1.0 fet140_adc12_01.c ADC12, Sample A0, Set P1.0 if A0 > 0.5*AVcc fet140_adc12_02.c ADC12, Using the Internal Reference fet140_adc12_03.c ADC12, Sample A10 Temp, Set P1.0 if Temp ++ ~2C fet140_adc12_04.c ADC12, Extend Sampling Period with SHT Bits fet140_adc12_05.c ADC12, Using an External Reference fet140_adc12_06.c ADC12, Repeated Sequence of Conversions fet140_adc12_07.c ADC12, Repeated Single Channel Conversions fet140_adc12_08.c ADC12, Using 10 External Channels for Conversion fet140_adc12_09.c ADC12, Sequence of Conversions (non-repeated) fet140_adc12_10.c ADC12, Sample A10 Temp and Convert to oC and oF fet140_adc12_11.c ADC12, Single Channel Rpt Mode, TA1 as Sample Trigger fet140_clks.c Basic Clock, Output Buffered SMCLK, ACLK and MCLK fet140_dac12_01.c DAC12_0, Output 1.0V on DAC0 fet140_dac12_02.c DAC12_1, Output 2.0V on DAC1 fet140_dac12_03.c DAC12_0, Output Voltage Ramp on DAC0 fet140_dma_01.c DMA0, Repeated Burst to-from RAM, Software Trigger fet140_dma_02.c DMA0, Repeated Block To P1OUT, TACCR2, DCO fet140_dma_03.c DMA0, Repeated Block UART1 9600, TACCR2, ACLK fet140_dma_04.c DMA0, Block Mode UART1 9600, 32kHz ACLK fet140_dma_05.c DMA0, Rpt'd Blk to DAC0, Sine Output, TACCR1, DCO fet140_dma_06.c DMA2, Rpt'd Blk to DAC1, 8-Bit Sine, TBCCR2, DCO fet140_dma_07.c DMA0/1, Rpt'd Blk to DAC0/1, Sin/Cos, TACCR1, XT2 fet140_dma_08.c DMA0, Rpt'd Blk, I2C Master Interface to DAC8571 fet140_dma_09.c DMA0, ADC12 A10 Block Xfer to RAM, TBCCR1, DCO fet140_dma_10.c DMA0, ADC12 A10 Block Xfer to Flash, TBCCR1, DCO fet140_dma_11.c DMA0/1, ADC12 A10 Block Xfer to MPY/RAM, TBCCR1, DCO fet140_dma_12.c DMA1/0, Blk Mode UART1 9600 Auto RX/TX String, ACLK fet140_dma_13.c DMA0/1/2, USART0 UART 9600 Full-Duplex Transcvr, ACLK fet140_dma_14.c DMA0/1/2, USART0 SPI 3-Wire SPI Master P1.x Exchange fet140_dma_15.c DMA0/1/2, USART0 SPI 3-Wire SPI Slave P1.x Exchange fet140_dma_16.c DMA0/1/2, USART1 SPI 3-Wire Master P1.x Exchange fet140_flashwrite_01.c Flash In-System Programming, Copy SegA to SegB fet140_fll_01.c Basic Clock, Implement Auto RSEL SW FLL fet140_fll_02.c Basic Clock, Implement Cont. SW FLL with Auto RSEL fet140_hfxt2.c Basic Clock, MCLK Sourced from HF XTAL XT2 fet140_hfxtal.c Basic Clock, MCLK Sourced from HF XTAL fet140_i2c_01.c I2C, Master Intf. to TMP100, Set P1.0 if Temp > 28C fet140_i2c_02.c I2C, Master Interface to PCF8574, Read/Write fet140_i2c_03.c I2C, Master Interface to DAC8571 in Repeat Mode fet140_i2c_04.c I2C, Master Reads from MSP430 Slave fet140_i2c_05.c I2C, Slave Transmits to MSP430 Master fet140_i2c_06.c I2C, Master Transmits to MSP430 Slave RX fet140_i2c_07.c I2C, Slave Reads from MSP430 Master fet140_i2c_08.c I2C, Master Writes Multiple Bytes to MSP430 Slave fet140_i2c_09.c I2C, Master Reads from MSP430 Slave in Repeat Mode fet140_i2c_10.c I2C, Slave Writes to MSP430 Master RX in Repeat Mode fet140_i2c_12.c I2C, Master Interface to DAC8571, Write fet140_i2c_13.c I2C, Master Interface to DAC8571, Read/Write fet140_i2c_14.c Switch Between UART0 & Master I2C Transmitter fet140_i2c_15.c I2C, Slave TMP100 Emulation II fet140_i2c_16.c I2C, Master Writes/Reads with Slave, Rptd Start fet140_i2c_17.c I2C, Slave Reads/Writes with Master, Rptd Start fet140_lpm3.c Basic Clock, LPM3 Using WDT ISR, 32kHz ACLK fet140_nmi.c Basic Clock, Configure RST/NMI as NMI fet140_rosc.c DCOCLK Biased with External Resistor Rosc fet140_spi0_03.c USART0, SPI Interface to HC165/164 Shift Registers fet140_spi0_04.c USART0, SPI Interface to TLV5616 DAC fet140_spi0_05.c USART0, SPI 3-Wire Master fet140_spi0_06.c USART0, SPI 3-Wire Slave fet140_spi0_07.c USART0, SPI Full-Duplex 3-Wire Master P1.x Exchange fet140_spi0_08.c USART0, SPI Full-Duplex 3-Wire Slave P1.x Exchange fet140_spi1_03.c USART1, SPI Interface to TLV5616 DAC fet140_spi1_04.c USART1, SPI Full-Duplex 3-Wire Master P1.x Exchange fet140_svs_01.c SVS, POR @ 2.5V Vcc fet140_ta0_ta1_uart2400.c Timer_A software UART 2400 Echo using CCR0 and CCR1, 32kHz ACLK fet140_ta_01.c Timer_A, Toggle P1.0, CCR0 Cont. Mode ISR, DCO SMCLK fet140_ta_02.c Timer_A, Toggle P1.0, CCR0 Up Mode ISR, DCO SMCLK fet140_ta_03.c Timer_A, Toggle P1.0, Overflow ISR, DCO SMCLK fet140_ta_04.c Timer_A, Toggle P1.0, Overflow ISR, 32kHz ACLK fet140_ta_05.c Timer_A, Toggle P1.0, CCR0 Up Mode ISR, 32kHz ACLK fet140_ta_06.c Timer_A, Toggle P1.0, CCR1 Cont. Mode ISR, DCO SMCLK fet140_ta_07.c Timer_A, Toggle P1.0-3, Cont. Mode ISR, DCO SMCLK fet140_ta_08.c Timer_A, Toggle P1.0-3, Cont. Mode ISR, 32kHz ACLK fet140_ta_09.c Timer_A, Toggle P1.0-3, Cont. Mode ISR, HF XTAL ACLK fet140_ta_10.c Timer_A, Toggle P1.1/TA0, Up Mode, DCO SMCLK fet140_ta_11.c Timer_A, Toggle P1.1/TA0, Up Mode, 32kHz ACLK fet140_ta_12.c Timer_A, Toggle P1.1/TA0, Up Mode, HF XTAL ACLK fet140_ta_13.c Timer_A, Toggle P1.1/TA0, Up/Down Mode, DCO SMCLK fet140_ta_14.c Timer_A, Toggle P1.1/TA0, Up/Down Mode, 32kHz ACLK fet140_ta_15.c Timer_A, Toggle P1.1/TA0, Up/Down Mode, HF XTAL ACLK fet140_ta_16.c Timer_A, PWM TA1-2, Up Mode, DCO SMCLK fet140_ta_17.c Timer_A, PWM TA1-2, Up Mode, 32kHz ACLK fet140_ta_18.c Timer_A, PWM TA1-2, Up Mode, HF XTAL ACLK fet140_ta_19.c Timer_A, PWM TA1-2, Up/Down Mode, DCO SMCLK fet140_ta_20.c Timer_A, PWM TA1-2, Up/Down Mode, 32kHz ACLK fet140_ta_21.c Timer_A, PWM TA1-2, Up/Down mode, HF XTAL ACLK fet140_ta_22.c Timer_A0, Capture of ACLK/8 using SMCLK fet140_ta_23.c Timer_A, Toggle P1.0, Overflow ISR, HF XTAL ACLK fet140_ta_24.c Timer_A, Toggle P1.0, CCR0 Up Mode ISR, 32kHz INCLK fet140_tb_01.c Timer_B, Toggle P1.0, CCR0 Cont. Mode ISR, DCO SMCLK fet140_tb_02.c Timer_B, Toggle P1.0, CCR0 Up Mode ISR, DCO SMCLK fet140_tb_03.c Timer_B, Toggle P1.0, Overflow ISR, DCO SMCLK fet140_tb_04.c Timer_B, Toggle P1.0, Overflow ISR, 32kHz ACLK fet140_tb_05.c Timer_B, Toggle P1.0, CCR0 Up Mode ISR, 32kHz ACLK fet140_tb_06.c Timer_B, PWM TB1-6, Up Mode, DCO SMCLK fet140_tb_07.c Timer_B, PWM TB1-6, Up Mode, 32kHz ACLK fet140_tb_08.c Timer_B, PWM TB1-2, Up Mode, HF XTAL ACLK fet140_tb_09.c Timer_B, PWM TB1-2, Up/Down Mode, DCO SMCLK fet140_tb_10.c Timer_B, PWM TB1-2, Up/Down Mode, 32kHz ACLK fet140_tb_11.c Timer_B, PWM TB1-2, Up/Down Mode, HF XTAL ACLK fet140_uart01_0115k.c USART0, UART 115200 Echo ISR, HF XTAL ACLK fet1