ADS飞思卡尔库库

RF Power Design Kit for ADS 2009, ADS 2011, ADS 2012, ADS 2014, ADS 2015, ADS 2016 and ADS 2017 version: 1.9 Overview: This kit is for simulation only for our external library and Single Part Design Kits (SPDKs). The simulation components were compiled for use within ADS2016 within MS Windows 64-bit machines and linux 64-bit machines. Components: METMOS: Simulator id is 'FSLRFPK_METMOS_v1' Description: Standard LDMOS file based model used within our external libraries and SPDKs. LDMOS: Simulator id is 'FSLRFPK_LDMOS_v1' Description: Standard LDMOS parameter based model used within our external libraries and SPDKs. FET2: Simulator id is 'FSLRFPK_FET2_v1 and FSLRFPK_FET2' Description: Standard LDMOS FET2 parameter based model used within our external libraries and SPDKs. FET2_INT: Simulator id is 'FSLRFPK_FET2_INT' Description: Standard LDMOS FET2 parameter based model with access to internal current and charge sources on both gate and drain used within our internal process design kits and SPDKs. FET2_WFE: Simulator id is 'FSLRFPK_FET2_WFE' Description: Standard LDMOS FET2 parameter based model with access to on drain used within our internal process design kits and SPDKs. MUC2: Simulator id is 'FSLRFPK_MUC2_v1' Description: Standard 2 Mutually Coupled coil parameter based model used within our external libraries and SPDKs. MUC3: Simulator id is 'FSLRFPK_MUC3_v1' Description: Standard 3 Mutually Coupled coil parameter based model used within our external libraries and SPDKs. LDMOS(mint): Simulator id is 'FSLRFPK_LDMOS_mint_v1' Description: Standard LDMOS parameter based model compiled using the MINT interface. This model is not fully supported or tested. version: 1.1 Overview: Version 1.1 has added features to those above including the new FET2 model. Components: FET2 Simulator id is 'FSLRFPK_FET2_v1' Description: Standard FET2 file based model used within our external libraries and SPDKs. version: 1.2 Overview: Version 1.2 fixed scaling of RTH and CTH in the FET2 model. Components: FET2 Simulator id is 'FSLRFPK_FET2_v1' Description: Standard FET2 file based model used within our external libraries and SPDKs. version: 1.3 Overview: Version 1.3 fixed thermal subcircuit issues to use external RTH and CTH. Also fixed the QDS voltage referencing to Vggs instead of Vgs. Components: FET2 Simulator id is 'FSLRFPK_FET2_v1' Description: Standard FET2 file based model used within our external libraries and SPDKs. version: 1.4 Overview: Version 1.4 Found thermal subcircuit scaling issues of RTH and CTH in the FET2 model. These have been wrong since version 1.2. This version corrects this issue. In Version 1.3 and 1.2, the scaling was inverted so that: Rth_new = Rth*Area; and Cth_new = Cth/Area; Now, it is correct: Rth_new = Rth/Area; and Cth_new = Cth*Area; Where Area = New_Periphery/Base_Periphery; Also, the FET2 model has been enhanced for more robust convergence and increased speed. Components: FET2 Simulator id is 'FSLRFPK_FET2' which is now preferred, but the user can still use 'FSLRFPK_FET2_v1' to access the same model. Description: Standard FET2 file based model used within our external libraries and SPDKs. version: 1.5 Overview: Version 1.5 offers a convergence fix/improvement when the argument of the functions using exp() goes below -20.0 to limit the minimum to -20.0. Also, for ADS2011, removed the loading of the library and palette ael files from the CmdOp vocabulary which caused an issue. And, made the function name in the palette.ael file more unique to avoid namespace clashing. Components: FET2 Simulator id is 'FSLRFPK_FET2' which is now preferred, but the user can still use 'FSLRFPK_FET2_v1' to access the same model. Description: Standard FET2 file based model used within our external libraries and SPDKs. version: 1.6 Overview: Version 1.6 adds ADS2012 binaries without any model code changes. version: 1.7 Overview: Version 1.7 adds ADS2014 binaries without any model code changes. version: 1.7.1 Overview: Version 1.7.1 adds new model, 'FSLRFPK_FET2_INT', supporting internal drain access for existing FET2 in ADS2012 and ADS2014 binaries without any model code changes. version: 1.7.2 Overview: Version 1.7.2 adds internal gate access to, 'FSLRFPK_FET2_INT', model for existing FET2 in ADS2012, ADS2014 and ADS2015 binaries without any model code changes. version: 1.8 Overview: Version 1.8 adds new model, 'FSLRFPK_FET2_WFE', for waveform engineering supports access to the internal to drain-to-source and capacitive currents in ADS2016 only. This new model also supports multi-threading to decrease simulation time. Version 1.8 updates existing model, 'FSLRFPK_FET2_INT', to support multi-threading to decrease simulation time in ADS2016 only. version: 1.8.1 Overview: Version 1.8.1 adds new parameter, 'Intrinsic', to the 'FSLRFPK_FET2_WFE' model enabling access to the internal to drain-to-source and capacitive currents for waveform engineering. This new parameter is toggled between 1 and 0. Setting this parameter to 1 enables the internal intrinsic currents. These currents then return real values. Setting this parameter to 0 disables these internal intrinsic currents. Once disabled these currents return 0. version: 1.9 Overview: Version 1.9 adds ADS2017 binaries without any model code changes.