PCM5242-TPA6120A2 PCB

Expedition PCB ODBPP Output --------------------------- 05:45 PM Tuesday, June 17, 2014 Job Name: C:\TempLayouts\PCM5242-TPA6120A2_QFN-REF2\PCB\PCM5242-TPA6120A2_QFN-REF2.pcb Output Dir: C:\TempLayouts\PCM5242-TPA6120A2_QFN-REF2\PCB\Output Output Job Name: odb+ Configuration file found. Using the following settings. Output User Layers Board Info mapped to board_info Using Placement Outline for package outline Remove NFP Pins: None Remove NFP Vias: None Export Mode: Full Neutralize nets Units: Imperial Read DRC Features Round Corners Read Net0 Info Read in Unplated Use Generate SilkScreen Data Processing Board Outline Processing Layer Information Processing Symbols Processing Packages Processing Components Changing Reference Designator MODE2/MS to MODE2_MS Changing Reference Designator SCL/MC/ATT1 to SCL_MC_ATT1 Changing Reference Designator ADR1/MISO/FMT to ADR1_MISO_FMT Changing Part Number 24LC256-I/MS to 24LC256-I_MS Changing Part Number PLR135/T10 to PLR135_T10 Changing Reference Designator SDA/MOSI/ATT2 to SDA_MOSI_ATT2 Changing Reference Designator GPIO4/MAST to GPIO4_MAST Changing Reference Designator GPIO6/FLT to GPIO6_FLT Changing Reference Designator GPIO2/GPO to GPIO2_GPO Changing Reference Designator GPIO5/ATT0 to GPIO5_ATT0 Changing Part Number 1239AS-H-2R2N=P2 to 1239AS-H-2R2N_P2 Changing Reference Designator GPIO3/AGNS to GPIO3_AGNS Processing Nets Processing Nets Processing Feature Section Processing Via Pads Processing Vias Processing Fiducials Processing Traces Processing Component Pads Processing Component Holes Processing Mounting Holes Processing Test Points Processing Component Holes Processing Positive Planes Processing Alternate Silkscreen Data WARNING: Since the starting (0.0534252,0.7049995)(in) and the ending (0.0534252,0.7049995)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.0320871,0.7114568)(in) and the ending (0.0320871,0.7114568)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.0451577,0.7028744)(in) and the ending (0.0451577,0.7028744)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.0320861,0.7114566)(in) and the ending (0.0320861,0.7114566)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.1231226,1.2000465)(in) and the ending (0.1231226,1.2000465)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.1296979,1.2119759)(in) and the ending (0.1296979,1.2119759)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.1607476,0.7670470)(in) and the ending (0.1607476,0.7670470)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.1127169,0.7756296)(in) and the ending (0.1127169,0.7756296)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.1271262,0.7018508)(in) and the ending (0.1271262,0.7018508)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.1609059,0.7156297)(in) and the ending (0.1609059,0.7156297)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.1608272,0.7154722)(in) and the ending (0.1608272,0.7154722)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.1531893,0.7086217)(in) and the ending (0.1531893,0.7086217)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.1132675,0.7082279)(in) and the ending (0.1132675,0.7082279)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.1129524,0.7084643)(in) and the ending (0.1129524,0.7084643)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.1802757,0.7019296)(in) and the ending (0.1802757,0.7019296)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.3206241,0.8090221)(in) and the ending (0.3206241,0.8090221)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.3575922,0.8092182)(in) and the ending (0.3575922,0.8092182)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.3737341,0.8266599)(in) and the ending (0.3737341,0.8266599)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.4206791,0.9443794)(in) and the ending (0.4206791,0.9443794)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.4236907,0.9311520)(in) and the ending (0.4236907,0.9311520)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. Hence this arc is approximated to a line. WARNING: Since the starting (0.4260528,0.9344294)(in) and the ending (0.4260528,0.9344294)(in) coordinates of the arc are same, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potenti