下载  >  行业  >  制造  > 紧凑型激光焊接系统 LSS-5M-1FIP

紧凑型激光焊接系统 LSS-5M-1FIP 评分

IPG laser 本操作手册是根据指示2006/42/ EC创建的。采用集成激光冷冻机LSS-5M(以下简称产品),实现了不完整的机器激光焊接系统的安全高效运行。 激光焊接系统由以下主要部件组成。 •LSS- 5m控制器(以下简称LSS控制器) •LSS-5M激光焊接工具(以下简称激光焊接工具)
LASER Table of contents 1 General information∴…::::::8 Manufacturer 1.2 EC Declaration of Conformity and Declaration of Incorp ration 1.3 Target groups for this operating manua 1.4 Warranty 1.5 Formal information about the operating manual 1.6 Presentation of safety instructions 12 1.7 ayout conventions 14 1.8 List of abbreviations 2 Safety....ameeeeeeo. 17 2.1 Safety instructions 17 2.2 Intended use 2.3 Non-intended use 2.4 Obligations of the system owner 18 2.5 Responsibility of the operating personnel.....19 2.6 Personnel qualifications 20 2.7 Safety- conscious working.…… 21 2.8 Personal protective gear 21 2.9 Specific dangers 21 2.9.1 Electrical energy 22 2.9.2 Laser radiation 22 2.9.3 Gas and particle emission 23 2.94 Operating media and auxiliary substances... 23 2.9.5 Mechanical movement 24 2.10 Safety features… 25 2.10.1E- Stop button……,,,, 29 2.10.2 Operator protection 2.10.3 Safety interfaces..... 32 2.10.4 Fiber break monitoring 33 210.5 Leakage sensors…… 33 2.10.6 High pressure switch 34 2.10.7 Laser welding tool safety circuit. mmmm.35 2.11 Information and warning signs.m. mmm. 37 2.12 Independent alteration or replacement parts procure- ment …40 3 System description..mcmmmmm... 41 LSS-5M-1F LASER 3.1 Functional principle 3.2 LSS controll 44 3.2.1 Main components… 44 3.2.2 Operating elements and displays.....45 3.2.3 Interfaces and connections .mm,.m,m,47 3.24 Integrated laser chiller. 47 3.2.5 Electrical mounting plates in the LSS controller..48 3.2.6 Mobile control panel… 51 3.2.7 Laser 52 3.3 Laser welding to 53 3.3.1 Interfaces and connections 54 3.3.2 Axes of motion…156 3.3.3 Pressure pieces… 57 3.3.4 Z-drive 62 3.3.5 Seam drive…… …62 3.3.6 Wobble drive 63 3.3.7 Welding optics… …64 3.3.8 Scattered light detector 65 3.4 Tube package 66 Supplemental equipment 68 3.5.1 Cleaning station 68 3.5.2 Suction system 4 Delivery and transport mmmm.. mmm...mmm...71 4.1 Scope of delivery 71 4.2 Delivery and transport 74 4.2.1 Unload 75 4.2.2 Unpacking the product.mm.m...m..75 4.2.3 Transport to the installation site.m..m.m..m.76 4.3 Returning the product 77 5 Assembly and installation 79 5.1 Space requirements and room conditions 80 5.2 Supply connections. 81 5.2.1 upply voltage 81 5.2.2 Cooling water supply… 82 52.3 Compressed air supply 83 5.2.4 Suction system. 83 3 Setting up the lss controlle 84 4 Running lines and fibers 85 Connecting the controller…… 88 5.5.1 Connecting the supply voltage 88 5.5.2 Connecting the water supply 89 5.5.3 Connecting the compressed air. 92 LASER 5.54 Connecting interfaces 93 5.6 Assembling the laser welding tool 95 5.6.1 Connecting the laser welding tool 7 5.6.2 Connecting the process fiber to the laser welding tool …………9 5.7 Installation supplemental equipment..... 101 5.7,1 Suction system….…….,101 5.7.2 Cleaning station 103 6 Acceptance and commissioning n1105 6.1 Visual inspection 105 6.2 Technical inspection 106 6.3 Work to be performed before commissioning... 106 6.3.1 Welding test…,, 107 6.3.2 Adjustment work 107 6.4 Transfer to operation 108 6 Recommissioning…… 画画画 109 7 Operation,,,,,,,,,,m,m,,,m,,,:110 7.1 Operating mode 111 7,1.1 Operating mode TESt.…,...… 111 7.1.2 Operating mode proce 111 7.13 Operating mode service 画量 a0ddddn0a dE 112 7.2 Switching on/off 112 7.3 LSS operating software....... 113 7.3.1 Logging onto the system....... 113 7.3.2 Operating display and date/time.m. 115 7.33 Main status window 116 7.3.4 Menu buttons… …118 7.3.5 About menu window …120 7.3.6 Menu window safety 121 7.3.7 Welding tool menu window 123 7.3.8 Controller menu window……1128 7.3.9 External menu window……130 7.3.10 Config menu window 131 7.3.11 Overview menu window 136 7.3.12 Events menu window …137 7.3.13 Programs menu window 139 73.14 Test menu window 140 7.3.15 Maintenance menu window,……… 141 7.3. 16 Monitoring menu windo 142 7.4 Home position of the laser welding tool 145 7.5 Working in operating mode TEST…… 145 7.5.1 Positions of the z-drive 146 LASER 7.52 Welding parameters 148 7.5.3 Welding profile…… 149 7.5.4 Welding test g 151 7.6 Working in operating mode process 153 7.6.1 Welding sequence.m....153 7.6.2 Manual mode 154 7.6.3 Time sequence diagrams ...................154 8 Service and maintenance 158 8.1 Operating mode service 158 8.2 Maintenance schedules 159 8.2.1 Maintenance schedule: lss controller 159 8.2.2 Laser welding tool maintenance schedule....163 8.2.3 Maintenance schedule: Wearing safety-related compo- nents 165 8.3 Maintenance and adjustment work 166 8.3.1 Automatic pressure piece cleaning…… 166 8.3.2 Manually clean the pressure piece and suction pipe 173 8.3.3 Cleaning the shaft 口1日日日日 …174 8.3.4 Air filter in the air maintenance unit 8.3.5 Air systems 175 8.3.6 Referencing the Z-driv 175 8.3.7 Referencing the seam drive……… 177 8.3.8 Setting the wobble unit 179 8.3.9 Clean fiber connectors 8.3.10 Z-drive- greasing the drive spindle …4190 8.3.11 Cooling water fill level...m...m....191 8.3.12 Cooling water contamination Broad-spectrum bio cide treatment 192 8.3.13 Cooling water replacement 193 8.3.14 Refrigerant filling quantity.........194 8.3.15 Moisture content of the refrigerant 194 8.3.16 Leaks in the refrigerant circuit.……… 195 8.3.17 Motor protection switch on the integrated laser chiller 196 8.3.18 Cleaning the strainer.m198 8.4 Replacement and repair work 1aa着画 199 8.4.1 Replacing the pressure piece.......199 8.4.2 Replacing the optics protective glass 201 8.4.3 Changing the laser welding tool 204 8.4.4 Replacing the welding optics....207 8.5 Spare parts and consumables 213 9 Messages and troubleshooting 214 9. 1 Information about message displays ............214 9.2 Status messages, warnings and alarms 215 LSS- 5M-1F LASER 9.3 Troubleshooting 215 9.4 Manufacturer's service .215 9.4.1 Behavior in the event of malfunctions 215 9.4.2 Downloading the event and log files 217 94.3 Resetting critical errors…,,… 221 9.4.4 Updating the firmware and product configuration. 222 9.4.5 Operating parameter settings 224 10 Decommissioning and disposal 225 10.1 Shutting down the system........... 225 10.2 Disassembly 226 10.3 Disposal. 227 11 Appendix mammmmmmmmmammmmmmmm 229 11.1 Status messages, warnings and alarms 229 11.1.1 Status messages …230 11.1.2 Warning messages 234 11.1.3 Alarms 244 11.2 Technical data,mmmmmmm 279 11.2.1 Scale drawings….,..……,279 11.2.2 Water specification 283 11.2.3 Dew point temperatures m.m...... 284 11. 2. 4 Compressed air supply......... 285 11.2.5 LSS controller….. 285 11.2.6 Laser welding tool 285 11.3 Interfaces 286 11.3.1 Description of interfaces 286 11.3.2 Contact assignment of the customer interfaces.287 113.3 LSS field bus logs mm 289 11.4 Rating plates and type keys 295 11.5 EC Declaration of Incorporation 298 LASER I General information 1 General information This operating manual was created according to the directive 2006/42/ EC. It enables safe and efficient operation of the incomplete machine Compact laser welding system with integrated laser chiller lss-5M Thereafter referred to as the product) The laser welding system consists of the following main components LSS-5M controller (hereafter referred to as LSS controller) sS-5M laser welding tool (hereafter referred to as laser welding tool) This operating manual is an integral part of the product and contains all important information about the assembly start-up operation and maintenance of the product. The operating and maintenance personnel must have carefully read and understood this operating manual before beginning any work. The safety instructions in this operating manual must be followed. Fail ure to follow the safety instructions can lead to personal injuries, dam age to the device or environmental damage This operating manual must be kept in the product's immediate vicinity and accessible to the operating personnel at all times. 1.1 Manufacturer Registered office IPG Laser gmbh in Germany Siemensstrasse 7 57299 Burbach Tele- +49(0)273644208100 phone: F; +49(0)273644208160 Internetwww.ipgphotonics.com Sales Tele +49(0)273644208340 phone E-mail saleseurope@ipgphotonics.com Customer service Tele- +49(0)273644208451 hone E-mail support.europe@ipgphotonics.com 1F LASER I General information 1.2 EC Declaration of Conformity and Declaration of Incorporation The product is an incomplete machine as defined by the ec machinery Directive and may only be put into operation under the following condi- tions The product forms a complete machine or system in conjunction with other machines The complete machine or system complies with the EC Machin ery Directive. This was determined through a conformity evalua tion procedure Declaration of The system integrator must create a declaration of Conformity accord- Conformity ing to the machinery Directive for the complete machine or the com- plete system. The Declaration of Conformity is the basis for the ce label ing of the system. The product may only be operated in compliance with national laws, regulations and standards Declaration of In- As an incomplete machine, this product is delivered with a declaration corporation of incorporation according to Annex Il b of the machinery directive 2006/42/EC. A list with the fundamental requirements complied with according to Annex I and the assembly manual are components of the declaration of incorporation. The assembly manual is part of the operat- ing manual The Declaration of Incorporation declares that the start-up of the in complete machine remains invalid until it is installed into a machine or assembled with other parts into a machine that satisfies the provisions of the ec machinery directive and the ec declaration of conformity ex ists in accordance with annex iia The declaration of incorporation for the product is included in annex EC Declaration of Incorporation of this operating manual 1.3 Target groups for this operating manual The translation of the original operating manual for the product was created by IPG Laser gmbh for the operating and maintenance person- nel of the system owner The operating personnel must have corresponding vocational training and be trained in the operation of the product (see Personnel qualifica tions[ 20]) LSS-5M-1F 9 LASER I General information The maintenance personnel are responsible for the assembly/installa- tion, maintenance and repair. The personnel must have heen trained in maintenance of the product by IPG Laser gmbh or another competent IPG branch office. Successful participation in the training is confirmed with a certificate (see Personnel qualifications[ 20]) 1. 4 arrant IPG Laser gmbh offers a warranty for all of its products with regard to material and manufacturing defects for the period specified in the appli- cable purchase contract or in the specifications. The warranty period begins on the date of delivery agreed upon in the purchase contract. In addition, IPG Laser Gmbh guarantees that this product satisfies all applicable specifications in normal operation During the warranty period, IPG Laser gmbh may choose to repair or replace a product that is found to be defective in the opinion of IPG Laser gmbh with regard to material and manufacturing defects Warranty period The warranty period for all products repaired or replaced during the ranty period and is only offered for the individual defective produc ar warranty period is limited to the remaining period of the original wi IPG Laser Gmbh reserves the right to issue a credit for all defective products that have proven to be faulty during normal operation Contact qualified IPG personnel for all maintenance work. All in quiries in connection with repairs or replacements within the framework of this warranty must be made imme diately after the defect was discovered; such inquiries must be made directly to IPG Laser gmbh or its local representative Driver software Current and future software is subject to the non-exclusive licensing conditions of IPG Laser gmbH. Using the software automatically consti tutes acceptance of the licensing conditions Service and re- When sending back components/ products, observe the following in- pairs structions Never send the product back to lPG Laser GmbH without enclos ing a valid RMa number (return Material Authorization). The RMA number can be obtained from the Service department of IPG Laser gmbh The costs for repair of the product will be invoiced to the cus tomer if the product or repair is not covered under the warranty Articles that are sent back to IPG Laser GmbH upon request must be shipped in a suitable container/packaging 10 LSS-5M-1F

...展开详情
所需积分/C币:7 上传时间:2019-03-02 资源大小:11.15MB
举报 举报 收藏 收藏
分享 分享
紧凑型激光焊接系统 LSS-5M-1FIP

IPG laser 本操作手册是根据指示2006/42/ EC创建的。采用集成激光冷冻机LSS-5M(以下简称产品),实现了不完整的机器激光焊接系统的安全高效运行。 激光焊接系统由以下主要部件组成。 •LSS- 5m控制器(以下简称LSS控制器) •LSS-5M激光焊接工具(以下简称激光焊接工具)

立即下载
紧凑型脉冲电流源的研究

讲述了PFN中各个元器件的作用及模块时序触发放电

立即下载
能够发布ArcGIS紧凑型切片的改进版Geoserver

该Geoserver可以发布ArcGIS的紧凑型切片,并且可以使用OpenLayer以WMS方式加载数据

立即下载
用于紧凑型无极灯的新型电子镇流器电路

为解决紧凑型无极灯的安全启动问题,提出一种新型的电子整流器电路。它通过所设置的慢升 压整流电路与定压触发电路的配合,成功地实现了紧凑型无极灯的安全启动。该电子整流器电路结 构简单、工作可靠、成本低廉,适合于小功率的紧凑型无极灯。

立即下载
支持预搜索的面积紧凑型BCH并行译码电路

支持预搜索的面积紧凑型BCH并行译码电路

立即下载
ZXC10 CBTS I2 CDMA2000紧凑型基站2型技术手册

移动通信系统的组成和发展的历史,CDMA2000的演进,CDMA的基本原理,CDMA20001x和1xEV-DO网络的基本概念.....

立即下载
对紧凑型二进制文件描述符的高效有区别预测

对紧凑型二进制文件描述符的高效有区别预测

立即下载
Vacon NXL紧凑型变频器样本(中文版).rar

Vacon NXL紧凑型变频器样本(中文版)rar,Vacon NXL紧凑型变频器样本(中文版)

立即下载
ABB IRC5 工业机器人紧凑型控制器产品手册.pdf

ABB IRC5 工业机器人紧凑型控制器产品手册pdf,ABB IRC5 工业机器人紧凑型控制器产品手册

立即下载
论文研究-一款紧凑型终端分集天线的设计 .pdf

一款紧凑型终端分集天线的设计,王青青,张东,提出并设计了一款紧凑型终端分集天线。该天线由印制在FR4板上的两个辐射单元和底面倒L接T型接地板结构构成。辐射单元采用变形单极�

立即下载
ZXONE M721城域传送平台紧凑型波分复用设备 硬件描述

ZXONE M721城域传送平台紧凑型波分复用设备 硬件描述

立即下载
海德汉 TNC 320适用于镗铣类机床的紧凑型数控系统.rar

海德汉 TNC 320适用于镗铣类机床的紧凑型数控系统rar,海德汉 TNC 320适用于镗铣类机床的紧凑型数控系统

立即下载
S7-1200紧凑型交换机模块CSM 1277操作说明.pdf

S7-1200紧凑型交换机模块CSM 1277操作说明pdf,西门子S7-1200紧凑型交换机模块CSM 1277操作说明

立即下载
瑞士瑞诺 紧凑型交流伺服驱动器 PAC系列样本下载(英文).pdf

瑞士瑞诺 紧凑型交流伺服驱动器 PAC系列样本下载(英文)pdf,瑞士瑞诺 紧凑型交流伺服驱动器 PAC系列样本下载(英文)

立即下载
Unitrans_ZXSM-600(V2)紧凑型同步数字传输设备维护手册

Unitrans_ZXSM-600(V2)紧凑型同步数字传输设备维护手册

立即下载
OptiX Metro 500 紧凑型STM-1 多业务传输平台 技术手册

华为optix metro 500 STM-1技术手册。

立即下载
施耐德RM6中压开关柜SF6绝缘环网柜和紧凑型开关柜.pdf

施耐德RM6中压开关柜SF6绝缘环网柜和紧凑型开关柜pdf,施耐德RM6中压开关柜SF6绝缘环网柜和紧凑型开关柜3~24kV产品目录:RM6为紧凑型中压开关柜系列产品,组合了所有中压功能单元,能够对开放式环网或辐射式电网上的一台或多台变压器进行连接、供电和保护

立即下载
移远L76-C超低功耗、紧凑型 多系统联合定位GNSS 模块规格书

L76C 是一款支持多卫星系统(GPS、BeiDou),可多系统联合定位,支持SBAS 信号接收处理,可向用户提供快速、精准、高性能定位体验的GNSS 模块。其尺寸超小,并拥有74 个通道同时跟踪;内置LNA 确保在弱信号环境下能有更好的性能。另外,L76C 采用LCC 封装,便于客户焊接。 通过内置Sensor Hub,L76C 模块可接入陀螺仪、加速度计、磁力计、气压计等多种传感器进行融合定位,通过精准的场景及模式识别,在恶劣信号环境下仍能保证快速、精准的定位效果,并显著降低平均运行功耗,大幅提升如手机、穿戴设备及物联网设备的待机时间。

立即下载
wordpress模板wood3简约紧凑SEO友好型内容模板

暂时只有英文版本.没还没汉化 demo:http://www.yd631.com 紧凑简约的内容型博客模板.

立即下载