/**
******************************************************************************
* @file stm8l15x_tim1.c
* @author MCD Application Team
* @version V1.5.0
* @date 13-May-2011
* @brief This file provides firmware functions to manage the following
* functionalities of the TIM1 peripheral:
* - TimeBase management
* - Output Compare management
* - Input Capture management
* - Interrupts, DMA and flags management
* - Clocks management
* - Synchronization management
* - Specific interface management
*
* @verbatim
*
* ===================================================================
* How to use this driver
* ===================================================================
* This driver provides functions to configure and initialise the TIM1
* peripheral
* These functions are split in 7 groups:
*
* 1. TIM1 TimeBase management: this group includes all needed functions
* to configure the TIM Timebase unit:
* - Set/Get Prescaler
* - Set/Get Autoreload
* - Counter modes configuration
* - Select the One Pulse mode
* - Update Request Configuration
* - Update Disable Configuration
* - Auto-Preload Configuration
* - Enable/Disable the counter
*
* 2. TIM1 Output Compare management: this group includes all needed
* functions to configure the Capture/Compare unit used in Output
* compare mode:
* - Configure each channel, independently, in Output Compare mode
* - Select the output compare modes
* - Select the Polarities of each channel
* - Set/Get the Capture/Compare register values
* - Select the Output Compare Fast mode
* - Select the Output Compare Forced mode
* - Output Compare-Preload Configuration
* - Clear Output Compare Reference
* - Select the OCREF Clear signal
* - Enable/Disable the Capture/Compare Channels
*
* 3. TIM1 Input Capture management: this group includes all needed
* functions to configure the Capture/Compare unit used in
* Input Capture mode:
* - Configure each channel in input capture mode
* - Configure Channel1/2 in PWM Input mode
* - Set the Input Capture Prescaler
* - Get the Capture/Compare values
*
* 4. TIM1 interrupts, DMA and flags management
* - Enable/Disable interrupt sources
* - Get flags status
* - Clear flags/ Pending bits
* - Enable/Disable DMA requests
* - Configure DMA burst mode
* - Select CaptureCompare DMA request
*
* 5. TIM1 clocks management: this group includes all needed functions
* to configure the clock controller unit:
* - Select internal/External clock
* - Select the external clock mode: ETR(Mode1/Mode2) or TIx
*
* 6. TIM1 synchronization management: this group includes all needed
* functions to configure the Synchronization unit:
* - Select Input Trigger
* - Select Output Trigger
* - Select Master Slave Mode
* - ETR Configuration when used as external trigger
*
* 7. TIM1 specific interface management, this group includes all
* needed functions to use the specific TIM1 interface:
* - Encoder Interface Configuration
* - Select Hall Sensor
*
* @endverbatim
*
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm8l15x_tim1.h"
/** @addtogroup STM8L15x_StdPeriph_Driver
* @{
*/
/** @defgroup TIM1
* @brief TIM1 driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/** @defgroup TIM1_Private_Functions_Prototypes
* @{
*/
static void TI1_Config(uint8_t TIM1_ICPolarity, uint8_t TIM1_ICSelection,
uint8_t TIM1_ICFilter);
static void TI2_Config(uint8_t TIM1_ICPolarity, uint8_t TIM1_ICSelection,
uint8_t TIM1_ICFilter);
static void TI3_Config(uint8_t TIM1_ICPolarity, uint8_t TIM1_ICSelection,
uint8_t TIM1_ICFilter);
static void TI4_Config(uint8_t TIM1_ICPolarity, uint8_t TIM1_ICSelection,
uint8_t TIM1_ICFilter);
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup TIM1_Private_Functions
* @{
*/
/** @defgroup TIM1_Group1 TimeBase management functions
* @brief TimeBase management functions
*
@verbatim
===============================================================================
TimeBase management functions
===============================================================================
===================================================================
TIM1 Driver: how to use it in Timing(Time base) Mode
===================================================================
To use the Timer in Timing(Time base) mode, the following steps are mandatory:
1. Enable TIM1 clock using CLK_PeripheralClockConfig(CLK_Peripheral_TIM1, ENABLE) function.
2. Call TIM1_TimeBaseInit() to configure the Time Base unit with the
corresponding configuration.
3. Enable global interrupts if you need to generate the update interrupt.
4. Enable the corresponding interrupt using the function TIM1_ITConfig(TIM1_IT_Update)
5. Call the TIM1_Cmd(ENABLE) function to enable the TIM1 counter.
Note1: All other functions can be used separately to modify, if needed,
a specific feature of the Timer.
@endverbatim
* @{
*/
/**
* @brief Deinitializes the TIM1 peripheral registers to their default reset values.
* @param None
* @retval None
*/
void TIM1_DeInit(void)
{
TIM1->CR1 = TIM1_CR1_RESET_VALUE;
TIM1->CR2
没有合适的资源?快使用搜索试试~ 我知道了~
资源推荐
资源详情
资源评论
收起资源包目录
STM8L--IIC通信--AT24C02 模拟IIC+库函数IIC (116个子文件)
Demo.Debug.cspy.bat 2KB
Demo.cspy.bat 1KB
stm8l15x_tim1.c 101KB
stm8l15x_tim5.c 76KB
stm8l15x_tim2.c 76KB
stm8l15x_tim3.c 76KB
stm8l15x_rtc.c 73KB
stm8l15x_i2c.c 48KB
stm8l15x_usart.c 45KB
stm8l15x_adc.c 40KB
stm8l15x_clk.c 39KB
stm8l15x_flash.c 33KB
stm8l15x_dac.c 32KB
stm8l15x_spi.c 30KB
stm8l15x_dma.c 28KB
stm8l15x_tim4.c 25KB
stm8l15x_lcd.c 24KB
stm8l15x_comp.c 24KB
stm8l15x_exti.c 20KB
stm8l15x_syscfg.c 19KB
stm8l15x_aes.c 14KB
stm8l15x_gpio.c 14KB
stm8l15x_wfe.c 13KB
stm8l15x_itc.c 11KB
stm8l15x_it.c 11KB
stm8l15x_pwr.c 11KB
stm8l15x_wwdg.c 8KB
stm8l15x_iwdg.c 8KB
stm8l15x_beep.c 8KB
myiic.c 7KB
24c0x.c 7KB
stm8l15x_irtim.c 6KB
stm8l15x_rst.c 5KB
main.c 3KB
stm8l15x-16x_stdperiph_drivers_um.chm 5MB
stm8l15x_gpio.pbi.cout 10KB
stm8l15x_i2c.pbi.cout 10KB
stm8l15x_clk.pbi.cout 10KB
24c0x.pbi.cout 10KB
main.pbi.cout 10KB
Demo.dbgdt 61KB
Demo.dep 12KB
Demo.dni 972B
Demo.dnx 3KB
Demo.ewd 16KB
Backup of Demo.ewd 11KB
Demo.ewp 58KB
Backup (2) of Demo.ewp 44KB
Backup of Demo.ewp 42KB
Demo.ewt 158KB
Demo.eww 158B
stm8l15x.h 130KB
stm8l15x_rtc.h 37KB
stm8l15x_tim1.h 37KB
stm8l15x_i2c.h 35KB
stm8l15x_tim2.h 28KB
stm8l15x_tim3.h 28KB
stm8l15x_tim5.h 28KB
stm8l15x_lcd.h 22KB
stm8l15x_syscfg.h 21KB
stm8l15x_clk.h 19KB
stm8l15x_adc.h 17KB
stm8l15x_spi.h 14KB
stm8l15x_flash.h 14KB
stm8l15x_itc.h 14KB
stm8l15x_dma.h 13KB
stm8l15x_usart.h 13KB
stm8l15x_tim4.h 11KB
stm8l15x_dac.h 10KB
stm8l15x_comp.h 10KB
stm8l15x_exti.h 10KB
stm8l15x_wfe.h 8KB
stm8l15x_gpio.h 6KB
stm8l15x_aes.h 5KB
stm8l15x_iwdg.h 5KB
stm8l15x_pwr.h 4KB
stm8l15x_it.h 4KB
stm8l15x_beep.h 3KB
stm8l15x_conf.h 3KB
stm8l15x_rst.h 3KB
stm8l15x_wwdg.h 3KB
stm8l15x_irtim.h 2KB
myiic.h 713B
24c0x.h 512B
Demo.hex 6KB
Release_Notes.html 39KB
Demo.pbd.linf 616B
BuildLog.log 3B
stm8l15x_i2c.o 73KB
stm8l15x_clk.o 57KB
stm8l15x_usart.o 56KB
myiic.o 34KB
stm8l15x_gpio.o 27KB
24c0x.o 17KB
main.o 14KB
Demo.out 71KB
Demo.pbd 674KB
stm8l15x_i2c.pbi 615KB
stm8l15x_clk.pbi 610KB
stm8l15x_usart.pbi 610KB
共 116 条
- 1
- 2
资源评论
- 幻空镜2019-05-28所以模拟IIC需不需要配传感器什么的默然_无畏2019-05-31可以配对应接口的IIC器件啊,我是用AT24C02的。你也可以换成其他的。时序对上就好
- terrymtyterry2019-03-06STM8L--IIC通信--AT24C02 模拟IIC+库函数IIC
默然_无畏
- 粉丝: 47
- 资源: 22
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- tensorflow-2.7.3-cp39-cp39-manylinux2010-x86-64.whl
- tensorflow-2.7.2-cp39-cp39-manylinux2010-x86-64.whl
- Python版本快速排序源代码
- Python 语言版的快速排序算法实现
- 450815388207377安卓_base.apk
- 超微主板 X9DRE-TF+ bios 支持 nvme启动
- 基于Python通过下载气象数据和插值拟合离散数据曲线实现对寒潮过程的能量分析
- 健身房系统的设计与实现论文Java项目
- 使用TCP实现的搜索可用服务器
- 使用贪心算法解决会议时间安排问题的 Java 示例代码
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功