-------------------------------------------------------------------------------
aircrack documentation
-------------------------------------------------------------------------------
What is aircrack ?
aircrack is a set of tools for auditing wireless networks:
+ airodump: 802.11 packet capture program
+ aireplay: 802.11 packet injection program
+ aircrack: static WEP and WPA-PSK key cracker
+ airdecap: decrypts WEP/WPA capture files
It says "cygwin1.dll not found" when I start aircrack.exe.
You can download this library from: http://100h.org/wlan/aircrack/.
To use aircrack, drag&drop your .cap or .ivs capture file(s) over
aircrack.exe. If you want to pass options to the program you'll have to
start a shell (cmd.exe) and manually type the command line; there are no
plans to develop a GUI for aircrack.
C:\TEMP> aircrack.exe -n 64 -f 8 out1.cap out2.cap
See below for a list of options.
Note: you can also use Kismet .dump files for WEP cracking.
Where can I download peek.dll ?
Both peek.dll and peek5.sys are provided in Peek.zip. They should be put in
the same directory as airodump.exe. To use airodump, you must check your
hardware compatibility and install a supported driver.
Where to download aircrack ?
The official download location is http://www.cr0.net:8040/code/network/.
However, if you can't access port 8040 for some reason, you may use this
mirror instead: http://100h.org/wlan/aircrack/.
Also check this WEP cracking video, and this other WPA cracking video
(flash required).
Is there an aircrack discussion forum ?
There is no aircrack mailing-list, however you can post your bugreports and
feature requests on the netstumbler Linux forum which I read quite
regularly.
What is the song in that WEP cracking video ?
The name of the song is Moskau, performed by Dschinghis Khan.
How do I crack a static WEP key ?
The basic idea is to capture as much encrypted traffic as possible using
airodump. Each WEP data packet has an associated 3-byte Initialization
Vector (IV): after a sufficient number of data packets have been collected,
run aircrack on the resulting capture file. aircrack will then perform a
set of statistical attacks developped by a talented hacker named KoreK.
How many IVs are required to crack WEP ?
WEP cracking is not an exact science. The number of required IVs depends on
the WEP key length, and it also depends on your luck. Usually, 40-bit WEP
can be cracked with 300.000 IVs, and 104-bit WEP can be cracked with
1.000.000 IVs; if you're out of luck you may need two million IVs, or more.
There's no way to know the WEP key length: this information is kept hidden
and never announced, either in management or data packets; as a
consequence, airodump can not report the WEP key length. Thus, it is
recommended to run aircrack twice: when you have 250.000 IVs, start
aircrack with "-n 64" to crack 40-bit WEP. Then if the key isn't found,
restart aircrack (without the -n option) to crack 104-bit WEP.
I can't seem to capture any IVs !
Possible reasons:
+ You are standing too far from the access point.
+ There is no traffic on the target wireless network.
+ There is some G traffic but you're capturing in B mode.
+ Something is wrong with your card (firmware problem ?)
By the way, beacons are just unencrypted announcement packets. They're
totally useless for WEP cracking.
Why is there no Windows version of aireplay ?
The PEEK driver doesn't support 802.11 packet injection. In fact, there are
no windows drivers supporting injection AT ALL. And I am NOT going to write
one, so don't bother asking me.
Also, the PEEK driver is only compatible with Windows 2000 / XP. It will
not work under Windows 9x.
Is my card compatible with airodump / aireplay ?
First of all, search Google to find which chipset your card has. For
example, if you have a Linksys WPC54G search for "wpc54g chipset linux".
+-------------------------------------------------------------------+
| | Supported by | Supported by | Supported by |
| Chipset | airodump for | airodump for | aireplay for |
| | Windows ? | Linux ? | Linux ? |
|------------+----------------+-------------------+-----------------|
| | YES (Agere | YES (patched | NO (firmware |
| HermesI | driver) | orinoco driver) | corrupts the |
| | | | MAC header) |
|------------+----------------+-------------------+-----------------|
| | | YES (HostAP or | YES (either |
| | NO, but see | wlan-ng driver), | with HostAP or |
| Prism2/3 | LinkFerret for | STA firmware | wlan-ng, driver |
| | an alternative | 1.5.6 or newer | patching |
| | | required | required) |
|------------+----------------+-------------------+-----------------|
| | NO, but see | YES (prism54 | YES (driver |
| PrismGT | LinkFerret for | driver, FullMAC | patching |
| | an alternative | cards only!) | recommended) |
| | (FullMAC only) | | |
|------------+----------------+-------------------+-----------------|
| | YES (Atheros | YES (madwifi | YES (driver |
| Atheros | driver) | driver) | patching |
| | | | required) |
|------------+----------------+-------------------+-----------------|
| | | | YES (driver |
| | YES (Realtek | YES ( | patching |
| RTL8180 | driver) | rtl8180-sa2400 | required), but |
| | | driver) | somewhat |
| | | | unreliable |
|------------+----------------+-------------------+-----------------|
| | YES (Cisco | YES (airo driver, | |
| Aironet | driver) | firmware 4.25.30 | NO |
| | | recommended) | |
|------------+----------------+-------------------+-----------------|
| | | | YES (driver |
| Ralink | NO | YES (rt2500 / | patching |
| | | rt2570 driver) | required for |
| | | | rt2570) |
|------------+----------------+-------------------+-----------------|
| | | PARTIAL: the | |
| Centrino b | NO | ipw2100 driver | NO |
| | | doesn't discard | |
| | | corrupted packets | |
|------------+----------------+-------------------+-----------------|
| Centrino b | NO | YES (ipw2200 | NO (firmware |
| /g | | driver) | drops packets) |
|------------+----------------+-------------------+-----------------|
| | | NO (and by the | |
| Br
没有合适的资源?快使用搜索试试~ 我知道了~
无线网络破解软件,破解WEB、WAP2

有笔记本电脑的朋友可以免费上网了,破解无线网络的密码的软件 如果大家现在没有笔记本电脑的话,可以先下载收藏着,以后有了笔记本再使用. 启用无线网卡打开软件就可以看到无线路由器的密码(是一列复杂的号)然后复制粘贴在无线网登陆的密码处就可以了。 WirelessKeyView 让你可以恢复 Windows 操作系统(非第三方产品)存储的无线网络密匙(WEP/WPA)。该软件采用十六进制和 Ascii (如果提供)码显示带有适配器名称和用户图形界面的密匙。该信息可以被拷贝到剪贴板或者导出为 Text/HTML/XML 文件格式。该软件不需要进行安装 经使用可以正常使用.我的路由是D LINK的,测试可以使用。 只设置了密码,没有其他设置(比如绑定。。。。等)现在推荐给大家。欢迎大家继续研究开发。看看是否其他路由器是否适应。 扫描802.11无线网络,并显示并检测每个网络信息,其中包括接收信号强度指示、渠道、电源模式、安全模式和传输率等。在这个新的版本中,你可以通过扫描很方便的发现每个网络的接入点位置,信号强度,并可以自动选择信号最有的网络。
资源推荐
资源详情
资源评论





















收起资源包目录


























共 21 条
- 1
- 2
- 3
- 4
- 5
pyc120
- 粉丝: 0
- 资源: 3

上传资源 快速赚钱
我的内容管理 收起
我的资源 快来上传第一个资源
我的收益
登录查看自己的收益我的积分 登录查看自己的积分
我的C币 登录后查看C币余额
我的收藏
我的下载
下载帮助

会员权益专享
安全验证
文档复制为VIP权益,开通VIP直接复制

- 1
- 2
- 3
- 4
前往页