RTX5在GD32F407上的移植模板

/*! \file gd32f4xx_enet.c \brief ENET driver \version 2024-01-15, V3.2.0, firmware for GD32F4xx */ /* Copyright (c) 2024, GigaDevice Semiconductor Inc. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "gd32f4xx_enet.h" #if defined (__CC_ARM) /*!< ARM compiler */ __align(4) enet_descriptors_struct rxdesc_tab[ENET_RXBUF_NUM]; /*!< ENET RxDMA descriptor */ __align(4) enet_descriptors_struct txdesc_tab[ENET_TXBUF_NUM]; /*!< ENET TxDMA descriptor */ __align(4) uint8_t rx_buff[ENET_RXBUF_NUM][ENET_RXBUF_SIZE]; /*!< ENET receive buffer */ __align(4) uint8_t tx_buff[ENET_TXBUF_NUM][ENET_TXBUF_SIZE]; /*!< ENET transmit buffer */ #elif defined ( __ICCARM__ ) /*!< IAR compiler */ #pragma data_alignment=4 enet_descriptors_struct rxdesc_tab[ENET_RXBUF_NUM]; /*!< ENET RxDMA descriptor */ #pragma data_alignment=4 enet_descriptors_struct txdesc_tab[ENET_TXBUF_NUM]; /*!< ENET TxDMA descriptor */ #pragma data_alignment=4 uint8_t rx_buff[ENET_RXBUF_NUM][ENET_RXBUF_SIZE]; /*!< ENET receive buffer */ #pragma data_alignment=4 uint8_t tx_buff[ENET_TXBUF_NUM][ENET_TXBUF_SIZE]; /*!< ENET transmit buffer */ #elif defined (__GNUC__) /* GNU Compiler */ enet_descriptors_struct rxdesc_tab[ENET_RXBUF_NUM] __attribute__((aligned(4))); /*!< ENET RxDMA descriptor */ enet_descriptors_struct txdesc_tab[ENET_TXBUF_NUM] __attribute__((aligned(4))); /*!< ENET TxDMA descriptor */ uint8_t rx_buff[ENET_RXBUF_NUM][ENET_RXBUF_SIZE] __attribute__((aligned(4))); /*!< ENET receive buffer */ uint8_t tx_buff[ENET_TXBUF_NUM][ENET_TXBUF_SIZE] __attribute__((aligned(4))); /*!< ENET transmit buffer */ #endif /* __CC_ARM */ /* global transmit and receive descriptors pointers */ enet_descriptors_struct *dma_current_txdesc; enet_descriptors_struct *dma_current_rxdesc; /* structure pointer of ptp descriptor for normal mode */ enet_descriptors_struct *dma_current_ptp_txdesc = NULL; enet_descriptors_struct *dma_current_ptp_rxdesc = NULL; /* init structure parameters for ENET initialization */ static enet_initpara_struct enet_initpara = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; static uint32_t enet_unknow_err = 0U; /* array of register offset for debug information get */ static const uint16_t enet_reg_tab[] = { 0x0000, 0x0004, 0x0008, 0x000C, 0x0010, 0x0014, 0x0018, 0x001C, 0x0028, 0x002C, 0x0034, 0x0038, 0x003C, 0x0040, 0x0044, 0x0048, 0x004C, 0x0050, 0x0054, 0x0058, 0x005C, 0x1080, 0x0100, 0x0104, 0x0108, 0x010C, 0x0110, 0x014C, 0x0150, 0x0168, 0x0194, 0x0198, 0x01C4, 0x0700, 0x0704, 0x0708, 0x070C, 0x0710, 0x0714, 0x0718, 0x071C, 0x0720, 0x0728, 0x072C, 0x1000, 0x1004, 0x1008, 0x100C, 0x1010, 0x1014, 0x1018, 0x101C, 0x1020, 0x1024, 0x1048, 0x104C, 0x1050, 0x1054 }; /* initialize ENET peripheral with generally concerned parameters, call it by enet_init() */ static void enet_default_init(void); #ifdef USE_DELAY /* user can provide more timing precise _ENET_DELAY_ function */ #define _ENET_DELAY_ delay_ms #else /* insert a delay time */ static void enet_delay(uint32_t ncount); /* default _ENET_DELAY_ function with less precise timing */ #define _ENET_DELAY_ enet_delay #endif /*! \brief deinitialize the ENET, and reset structure parameters for ENET initialization \param[in] none \param[out] none \retval none */ void enet_deinit(void) { rcu_periph_reset_enable(RCU_ENETRST); rcu_periph_reset_disable(RCU_ENETRST); enet_initpara_reset(); } /*! \brief configure the parameters which are usually less cared for initialization note -- this function must be called before enet_init(), otherwise configuration will be no effect \param[in] option: different function option, which is related to several parameters, refer to enet_option_enum only one parameter can be selected which is shown as below \arg FORWARD_OPTION: choose to configure the frame forward related parameters \arg DMABUS_OPTION: choose to configure the DMA bus mode related parameters \arg DMA_MAXBURST_OPTION: choose to configure the DMA max burst related parameters \arg DMA_ARBITRATION_OPTION: choose to configure the DMA arbitration related parameters \arg STORE_OPTION: choose to configure the store forward mode related parameters \arg DMA_OPTION: choose to configure the DMA descriptor related parameters \arg VLAN_OPTION: choose to configure vlan related parameters \arg FLOWCTL_OPTION: choose to configure flow control related parameters \arg HASHH_OPTION: choose to configure hash high \arg HASHL_OPTION: choose to configure hash low \arg FILTER_OPTION: choose to configure frame filter related parameters \arg HALFDUPLEX_OPTION: choose to configure halfduplex mode related parameters \arg TIMER_OPTION: choose to configure time counter related parameters \arg INTERFRAMEGAP_OPTION: choose to configure the inter frame gap related parameters \param[in] para: the related parameters according to the option all the related parameters should be configured which are shown as below FORWARD_OPTION related parameters: - ENET_AUTO_PADCRC_DROP_ENABLE/ ENET_AUTO_PADCRC_DROP_DISABLE ; - ENET_TYPEFRAME_CRC_DROP_ENABLE/ ENET_TYPEFRAME_CRC_DROP_DISABLE ; - ENET_FORWARD_ERRFRAMES_ENABLE/ ENET_FORWARD_ERRFRAMES_DISABLE ; - ENET_FORWARD_UNDERSZ_GOODFRAMES_ENABLE/ ENET_FORWARD_UNDERSZ_GOODFRAMES_DISABLE . DMABUS_OPTION related parameters: - ENET_ADDRESS_ALIGN_ENABLE/ ENET_ADDRESS_ALIGN_DISABLE ; - ENET_FIXED_BURST_ENABLE/ ENET_FIXED_BURST_DISABLE ; - ENET_MIXED_BURST_ENABLE/ ENET_MIXED_BURST_DISABLE ; DMA_MAXBURST_OPTION related parameters: - ENET_RXDP_1BEAT/ ENET_RXDP_2BEAT/ ENET_RXDP_4BEAT/ ENET_RXDP_8BEAT/ ENET_RXDP_16BEAT/ ENET_RXDP_32BEAT/