USB Digital Microscope
(20x-200x)
User instructions
z Introduction
Thank you for your choice of our product - it is a high-tech while easy
to use Digital Microscope. With this unit you will see a unique and
“bigger” world.
It’s easy to zoom in on stamps, coins, paper currency, plants, insects,
rocks and minerals, and so much more.
We recommend reading this manual first to get the best out of this unit.
Computer System Requirements:
Windows 2000/XP/VISTA/WIN7&Mac
P4 1.8 or above
RAM: 256M
Video Memory: 32M
USB port: 2.0
CD-ROM Drive
z Technical Specifications
Image sensor 1.3 Mega Pixels
Still capture resolution
1600x1200, 1280x1024, 1280x960, 1024x768, 800x600,
640x480, 352x288, 320x240, 160x120
Video capture resolution
1600x1200, 1280x1024, 1280x960, 1024x768, 800x600,
640x480, 352x288, 320x240, 160x120
Focus Range Manual focus from 10mm to 500mm
Frame Rate Max 30f/s under 600 Lus Brightness
Magnification Ratio 20x to 200x
Video format AVI
Photo format JPEG or BMP
Light source 8 LED (adjustable by control wheel)
PC interface USB2.0
Power source 5V DC from USB port
Operation system Windows2000/XP/Vista/Win7/ Mac
OSD language English, German, Spanish, Korean, French, Russian
Bundle software MicroCapture
Size 110mm (L) x 33mm (R)
z Install the software
Connect the Microscope to Computer!! It is must to connect the
Microscope to Computer before software installation.
Insert the driver CD into CD-ROM Drive and this will automatically
display the following interface:
1. Install the driver by clicking install Microscope Driver
The Install Shield Wizard will walk you through the whole process.
Click on the “Next” button to continue.
2. Install the MicroCapture software
Click MicroCapture software and then reboot the system when asked.
3. You can also browse the User’s manual in PDF format and the CD
contents by choosing the corresponding menus.
A Quick Look at the Digital Microscope
1/ Remove protective lens cap from microscope before use.
2/ Use the FOCUS WHEEL to adjust focus on the subject.
3/ The SNAPSHOT BUTTON enables user to capture snapshots by
hardware; photo capture by software is discussed later on in this manual.
4/ Light control wheel enables you to adjust the LED light brightness
z Start Microscope
Connect your Microscope to your PC USB port, start the software by
clicking the
icon generated on the desktop after installation and
you will see the following screen pop up.
1. When the Microscope is disconnected from your PC USB port,
the screen will display “No Device detected, please connect your
Microscope directly to your PC USB port.”
- 1
- 2
- 3
- 4
- 5
- 6
前往页