AdvancedToolKit1.71_Source_STD

编译所需环境:AdvancedToolKit1.71_Source_STD/ 1.Cygwin http://www.cygwin.com/ 2.GNU gcc toolchain for cygwin http://www.gnuarm.com/bu-2.17_gcc-4.1.1-c-c++_nl-1.14.0_gi-6.5.exe 操作步骤： 1.安装AdvancedToolKit1.71_Source_STD，根据AdvancedToolKit1.71_Source_STD/FSL_ATK_ReferenceManual_Std.pdf P15页说明安装GCC toolchain,Cygwin。 2.添加新的nand flash类型 ATK1.71版本需要修改device_program/flash/nand_flash/src/nand_device_info.c，对于之前的版本需要修改device_program/flash/nand_flash/src/nand_ids.c 例如：要添加K9F1G08R0A型号的nand flash, 查阅nand flash 芯片手册得知： 厂商ID(man_id)：0xec 设备ID(dev_id)：0xa1 芯片大小(chip_size_in_bytes)：128MB 每块页数(ppb):64 页大小(page_size):2KB OOB区域大小(oob_size):64B 所也在nand_device_info.c中添加nand结构信息如下： { .end_of_table = false, .man_id = 0xec, .dev_id = 0xa1, .cell_type = NAND_DEVICE_CELL_TECH_SLC, .chip_size_in_bytes = 128LL*SZ_1M, .ppb = 64, .page_size = 2*SZ_1K, .oob_size = 64, .bbm_offset = 0, .bbi_page_offset = 0, .bus_width = 8, .scan_pg_num = 1, .model = "K9F1G08R0A", }, 3.编译 启动Cygwin,进入目录AdvancedToolKit1.71_Source_STD/device_program 根据AdvancedToolKit1.71_Source_STD/FSL_ATK_ReferenceManual_Std.pdf P16页说明操作