STM32F103RCT6在IIC的OLED显示屏显示大气传感器GYBMP280的大气压数据

/** ****************************************************************************** * @file stm32f10x_tim.c * @author MCD Application Team * @version V3.6.2 * @date 17-September-2021 * @brief This file provides all the TIM firmware functions. ****************************************************************************** * @attention * * Copyright (c) 2012 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f10x_tim.h" #include "stm32f10x_rcc.h" /** @addtogroup STM32F10x_StdPeriph_Driver * @{ */ /** @defgroup TIM * @brief TIM driver modules * @{ */ /** @defgroup TIM_Private_TypesDefinitions * @{ */ /** * @} */ /** @defgroup TIM_Private_Defines * @{ */ /* ---------------------- TIM registers bit mask ------------------------ */ #define SMCR_ETR_Mask ((uint16_t)0x00FF) #define CCMR_Offset ((uint16_t)0x0018) #define CCER_CCE_Set ((uint16_t)0x0001) #define CCER_CCNE_Set ((uint16_t)0x0004) /** * @} */ /** @defgroup TIM_Private_Macros * @{ */ /** * @} */ /** @defgroup TIM_Private_Variables * @{ */ /** * @} */ /** @defgroup TIM_Private_FunctionPrototypes * @{ */ static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter); static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter); static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter); static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter); /** * @} */ /** @defgroup TIM_Private_Macros * @{ */ /** * @} */ /** @defgroup TIM_Private_Variables * @{ */ /** * @} */ /** @defgroup TIM_Private_FunctionPrototypes * @{ */ /** * @} */ /** @defgroup TIM_Private_Functions * @{ */ /** * @brief Deinitializes the TIMx peripheral registers to their default reset values. * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. * @retval None */ void TIM_DeInit(TIM_TypeDef* TIMx) { /* Check the parameters */ assert_param(IS_TIM_ALL_PERIPH(TIMx)); if (TIMx == TIM1) { RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE); RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE); } else if (TIMx == TIM2) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE); } else if (TIMx == TIM3) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE); } else if (TIMx == TIM4) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE); } else if (TIMx == TIM5) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE); } else if (TIMx == TIM6) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE); } else if (TIMx == TIM7) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE); } else if (TIMx == TIM8) { RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE); RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE); } else if (TIMx == TIM9) { RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE); RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE); } else if (TIMx == TIM10) { RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE); RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE); } else if (TIMx == TIM11) { RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE); RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE); } else if (TIMx == TIM12) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE); } else if (TIMx == TIM13) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE); } else if (TIMx == TIM14) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE); } else if (TIMx == TIM15) { RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, ENABLE); RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, DISABLE); } else if (TIMx == TIM16) { RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, ENABLE); RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, DISABLE); } else { if (TIMx == TIM17) { RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, ENABLE); RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, DISABLE); } } } /** * @brief Initializes the TIMx Time Base Unit peripheral according to * the specified parameters in the TIM_TimeBaseInitStruct. * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. * @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef * structure that contains the configuration information for the * specified TIM peripheral. * @retval None */ void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) { uint16_t tmpcr1 = 0; /* Check the parameters */ assert_param(IS_TIM_ALL_PERIPH(TIMx)); assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode)); assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision)); tmpcr1 = TIMx->CR1; if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM2) || (TIMx == TIM3)|| (TIMx == TIM4) || (TIMx == TIM5)) { /* Select the Counter Mode */ tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS))); tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode; } if((TIMx != TIM6) && (TIMx != TIM7)) { /* Set the clock division */ tmpcr1 &= (uint16_t)(~((uint16_t)TIM_CR1_CKD)); tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision; } TIMx->CR1 = tmpcr1; /* Set the Autoreload value */ TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ; /* Set the Prescaler value */ TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler; if ((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| (TIMx == TIM16) || (TIMx == TIM17)) { /* Set the Repetition Counter value */ TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter; } /* Generate an update event to reload the Prescaler and the Repetition counter values immediately */ TIMx->EGR = TIM_PSCReloadMode_Immediate; } /** * @brief Initializes the TIMx Channel1 according to the specified * parameters in the TIM_OCInitStruct. * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure * that contains the configuration information for the specified TIM peripheral. * @retval None */ void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) { uint16_t tmpccmrx =