下载 >  操作系统 >  Linux > linux-0.96c.tar

linux-0.96c.tar

linux-0.96c.tar linux-0.96c.tar linux-0.96c.tar linux-0.96c.tar
2011-11-16 上传大小:235KB
分享
收藏 举报
linux 内核0.96版

linux 非常原始的内核。

立即下载
easygui-0.96.zip

easygui是python的一个模块,利用它可以简单快速的建立GUI。 解压缩后将里面的内容复制到python安装目录下就可以。

立即下载
0.96寸OLED测试程序(STM32)

0.96寸OLED测试程序(STM32),包含寄存器版本和库函数版本。测试通过。

立即下载
easygui-docs-0.96.zip

easygui-docs-0.96.zip,在windows下的文档说明,很好用!

立即下载
stm32的0.96寸oled使用例程

stm32的0.96寸oled使用例程,需要的可以下载,学习stm32的新手可以参考

立即下载
0.96OLED显示屏数据手册

Pin Number Symbol I/O Function P Po o we er r S Su up pp pl ly y 9 VDD P P Po o we er r S Su up pp pl ly y f fo or r L Lo og gi ic c This is a voltage supply pin. It must be connected to external source. 8 VSS P G Gr ro ou un nd d o of f L Lo og gi ic c C Ci ir rc cu ui it t This is a ground pin. It acts as a reference for the logic pins. It must be connected to external ground. 28 VCC P P Po o we er r S Su up pp pl ly y f fo or r OE EL L P Pa an ne el l This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and V SS when the converter is used. It must be connected to external source when the converter is not used. 29 VLSS P G Gr ro ou un nd d o of f A An na al lo og g C Ci ir rc cu ui it t This is an analog ground pin. It should be connected to V SS externally. D Dr ri iv ve er r 26 IREF I C Cu ur rr re en nt t R Re ef fe er re en nc ce e f fo or r B Br ri ig gh ht tn ne es ss s A Ad dj ju us st t me en nt t This pin is segment current reference pin. A resistor should be connected between this pin and V SS . Set the current at 12.5μA maximum. 27 VCOMH O V Vo ol lt ta ag ge e Ou ut tp pu ut t Hi ig gh h L Le ev ve el l f fo or r C C O M S Si ig gn na al l This pin is the input pin for the voltage output high level for COM signals. A capacitor should be connected between this pin and V SS . D DC C/ /D DC C C Co on nv ve er rt te er r 6 VDDB P P Po o we er r S Su up pp pl ly y f fo or r DC C/ / DC C C Co on nv ve er rt te er r C Ci ir rc cu ui it t This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to V DD when the converter is not used. 4 / 5 2 / 3 C1P / C1N C2P / C2N I P Po os si it ti iv ve e T Te er r mi in na al l o of f t th he e F Fl ly yi in ng g I In nv ve er rt ti in ng g C Ca ap pa ac ci it to or r Ne eg ga at ti iv ve e T Te er r mi in na al l o of f t th he e F Fl ly yi in ng g B Bo oo os st t C Ca ap pa ac ci it to or r The charge-pump capacitors are required between the terminals. They must be floated when the converter is not used. I In nt te er rf fa ac ce e 10 11 12 BS0 BS1 BS2 I C Co o m mu un ni ic ca at ti in ng g P Pr ro ot to oc co ol l S Se el le ec ct t These pins are MCU interface selection input. See the following table: BS0 BS1 BS2 I 2 C 0 1 0 3-wire SPI 1 0 0 4-wire SPI 0 0 0 8-bit 68XX Parallel 0 0 1 8-bit 80XX Parallel 0 1 1 14 RES# I P Po o we er r R Re es se et t f fo or r C Co on nt tr ro ol ll le er r a an nd d Dr ri iv ve er r This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin pull high during normal operation. 13 CS# I C Ch hi ip p S Se el le ec ct t This pin is the chip select input. The chip is enabled for MCU communication only when CS# is pulled low. 15 D/C# I Da at ta a/ /C Co o m ma an nd d C Co on nt tr ro ol l This pin is Data/Command control pin. When the pin is pulled high, the input at D7~D0 is treated as display data. When the pin is pulled low, the input at D7~D0 will be transferred to the command register. When the pin is pulled high and serial interface mode is selected, the data at SDIN will be interpreted as data. When it is pulled low, the data at SDIN will be transferred to the command register. In I 2 C mode, this pin acts as SA0 for slave address selection. For detail relationship to MCU interface signals, please refer to the Timing Characteristics Diagrams. 17 E/RD# I R Re ea ad d/ / Wr ri it te e E En na ab bl le e o or r R Re ea ad d This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled high and the CS# is pulled low. When connecting to an 80XX-microprocessor, this pin receives the Read (RD#) signal. Data read operation is initiated when this pin is pulled low and CS# is pulled low. When serial or I 2 C mode is selected, this pin must be connected to V SS . GoldenMorning Electronic 4 1.5 Pin Definition (Continued) Pin Number Symbol I/O Function I In nt te er rf fa ac ce e ( (C Co on nt ti in nu ue ed d) ) 16 R/W# I R Re ea ad d/ / Wr ri it te e S Se el le ec ct t o or r Wr ri it te e This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as Read/Write (R/W#) selection input. Pull this pin to “High” for read mode and pull it to “Low” for write mode. When 80XX interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled low and the CS# is pulled low. When serial or I 2 C mode is selected, this pin must be connected to V SS . 18~25 D0~D7 I/O Ho os st t Da at ta a I In np pu ut t/ / Ou ut tp pu ut t B Bu us s These pins are 8-bit bi-directional data bus to be connected to the microprocessor’s data bus. When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK. When I 2 C mode is selected, D2 & D1 should be tired together and serve as SDA out & SDA in in application and D0 is the serial clock input SCL. Unused pins must be connected to V SS except for D2 in serial mode. R Re es se er rv ve e 7 N.C. - R Re es se er rv ve ed d P Pi in n The N.C. pin between function pins are reserved for compatible and flexible design. 1, 30 N.C. (GND) - R Re es se er rv ve ed d P Pi in n ( (S Su up pp po or rt ti in ng g P Pi in n) ) The supporting pins can reduce the influences from stresses on the function pins. These pins must be connected to external ground as the ESD protection circuit.

立即下载
0.96'' 128*64单色OLED驱动板

0.96'' 128*64单色OLED驱动板 0.96'' 128*64单色OLED驱动板 0.96'' 128*64单色OLED驱动板

立即下载
0.96寸OLED_IIC_arduino例程

0.96寸OLED_IIC_arduino例程

立即下载
STM32f103驱动SSD1306的OLED(0.96寸)演示动画驱动

使用基于STM32f103驱动SSD1306的OLED(0.96寸)演示动画驱动,包含整个工程文件-Based STM32f103 drive SSD1306 of OLED (0.96 inch) driven animation, contains the entire project file

立即下载
0.96寸12864 OLED资料

0.96寸 12864 oled资料包含各种例程 OLED(Organic Light-Emitting Diode):有机发光二极管又称为有机电激光显示,由美籍 华裔教授邓青云在实验室中发现,由此展开了对 OLED 的研究。OLED 显示技术具有自发 光的特性,采用非常薄的有机材料涂层和玻璃基板,当有电流通过时,这些有机材料就会发 光,而且 OLED 显示屏幕可视角度大,并且能够节省电能。OLED 由于同时具备自发光、 不需背光源、对比度高、厚度薄、视角广、反应速度快、可用于挠曲面板、使用温度范围广、 结构及制程简单等优异之特性,被认为下一代平面显示器新兴应用技术。 最先接触的 12864 屏都是 LCD 的,需要背光,功耗较高,而 OLED 的功耗低,更加适 合小系统;由于两者发光材料的不同,在不同的环境中,OLED 的显示效果更佳。更多的 OLED 与 LCD 的比较,可以百度,了解更多信息。

立即下载
中景园电子0.96OLED显示屏 IIC接口资料

中景园电子0.96OLED显示屏 IIC接口资料

立即下载
0.96 OLED显示程序,只需要调用,就能显示

0.96OLED 屏幕显示函数,只需要调用,就能显示。C语言。

立即下载
STM32上驱动基于IIC协议的OLED 128664 0.96英寸

压缩包当中有一个STM32驱动0.96 OLED 12864(SSD1306)显示屏的例程,还包含了OLED的官方使用说明以及取字软件,适合买了4个脚的OLED只能用于IIC通信的也适合于6脚OLED为了省管脚选择IIC通信的。例程很详细,SCL-PB6,SDA-PB7

立即下载
The Django Book 0.96 中文版

The Django Book 0.96 中文版

立即下载
0.96寸OLED显示屏用户资料

0.96寸OLED显示屏用户资料,包含程序和技术资料。

立即下载
0.96寸OLED屏原理图

0.96OLED原理图 可以用于OLED的学习和开发。 

立即下载
hbase 的java代码 集合 hbase 0.96

hbase 的java代码 集合 hbase 0.96

立即下载
学习linux~shell编程~网络推荐书籍(大牛推荐哦)

大牛推荐学习linux~shell编程~网络推荐书籍

立即下载
Linux经典书籍合集(强烈推荐初学者)

Linux菜鸟过关.chm Linux基础命令课程.chm Linux实用培训学习教程1.0(最终版).chm 实用技术精华{面向初学Linux朋友的书籍}.CHM

立即下载
esp8266驱动 c语言版本

基于ucos平台开发esp8266驱动代码,独立驱动任务处理数据通讯判断断开重连,非阻塞的收发接口函数;

立即下载

热点文章

关闭
img

spring mvc+mybatis+mysql+maven+bootstrap 整合实现增删查改简单实例.zip

资源所需积分/C币 当前拥有积分 当前拥有C币
5 0 0
点击完成任务获取下载码
输入下载码
为了良好体验,不建议使用迅雷下载
img

linux-0.96c.tar

会员到期时间: 剩余下载个数: 剩余C币: 剩余积分:0
为了良好体验,不建议使用迅雷下载
VIP下载
您今日下载次数已达上限(为了良好下载体验及使用,每位用户24小时之内最多可下载20个资源)

积分不足!

资源所需积分/C币 当前拥有积分
您可以选择
开通VIP
4000万
程序员的必选
600万
绿色安全资源
现在开通
立省522元
或者
购买C币兑换积分 C币抽奖
img

资源所需积分/C币 当前拥有积分 当前拥有C币
5 4 45
为了良好体验,不建议使用迅雷下载
确认下载
img

资源所需积分/C币 当前拥有积分 当前拥有C币
5 0 0
为了良好体验,不建议使用迅雷下载
VIP和C币套餐优惠
img

资源所需积分/C币 当前拥有积分 当前拥有C币
5 4 45
您的积分不足,将扣除 10 C币
为了良好体验,不建议使用迅雷下载
确认下载
下载
您还未下载过该资源
无法举报自己的资源

兑换成功

你当前的下载分为234开始下载资源
你还不是VIP会员
开通VIP会员权限,免积分下载
立即开通

你下载资源过于频繁,请输入验证码

您因违反CSDN下载频道规则而被锁定帐户,如有疑问,请联络:webmaster@csdn.net!

举报

若举报审核通过,可返还被扣除的积分

  • 举报人:
  • 被举报人:
  • *类型:
    • *投诉人姓名:
    • *投诉人联系方式:
    • *版权证明:
  • *详细原因: