ProlificPL-2303驱动(官方驱动1.8支持Win764位)资源-CSDN文库

共5个文件

txt：2个

exe：2个

pdf：1个

Prolific

PL-2303

Driver

5星 · 超过95%的资源需积分: 38 87 浏览量 2013-02-28 08:57:30 上传评论收藏 3.86MB ZIP 举报

资源推荐

资源详情

资源评论

收起资源包目录

PL2303_Prolific_DriverInstaller_v1_8_0.zip （5个子文件）

PL2303CheckChipVersion_ReadMe.txt 2KB

PL2303_DriverInstallerv1.8.0_ReleaseNote.txt 9KB

PL2303 Windows Driver User Manual v1.8.0.pdf 1.55MB

PL2303_Prolific_DriverInstaller_v1.8.0.exe 3.06MB

checkChipVersion_v1006.exe 208KB

PL2303 Windows Driver User’s Manual

For Driver Installer v1.8.0 Release

For Microsoft Windows Operating Systems

Prolific Technology Inc. - 1 of 20 - February 26, 2013

All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding

the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial

damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be

reproduced or transmitted in any form by any means without the express written permission of the manufacturer.

PL2303 USB-to-Serial Bridge Chip Family

Windows Driver Installer User Manual

WHQL Driver Version Information

 Driver Installer & Build date: 1.8.0 (2013-2-26)

 GUID: ECC3713C-08A4-40E3-95F1-7D0704F1CE5E

 Windows 2000 / Windows XP (32 & 64-bit) WHQL Driver: v2.1.44.226 (2/5/2013)

 Compatible with Server 2003 (32 & 64-bit)

 Windows Vista / Windows 7 / Windows 8 (32 & 64-bit) WHQL Driver: v3.4.48.272 (2/5/2013)

 Compatible with Server 2008, Server 2008R2, Server 2012 (32 & 64-bit)

 Drivers can also automatically install via Windows Update (need Internet connection)

System Requirements

 PC with USB 1.1/2.0/3.0 Host Controller (USB Port) and following Windows OS Family:

 Windows 2000 SP4

 Windows XP SP2 or SP3 (32 & 64 bit)

 Windows Server 2003 (32 & 64 bit)

 Windows Vista (32 & 64 bit)

 Windows 7 (32 & 64 bit)

 Windows Server 2008 / 2008 R2 (32 & 64 bit)

 Windows 8 (32 & 64 bit)

 Windows Server 2012 (32 & 64 bit)

 USB Device with below PL-2303 chip versions and their supported OS Family:

Chip Version

Windows 2000 / XP

(32 & 64 bit)

Vista / Windows 7

(32 & 64 bit)

Windows 8

(32 & 64 bit)

PL-2303H

Yes

Not Supported*

PL-2303HX (Rev A) or HXA

Yes

Not Supported*

PL-2303X or XA

Yes

Not Supported*

PL-2303HX (Rev D) or HXD

Yes

PL2303TA

Yes

PL2303TB

Yes

PL2303EA

Yes

PL2303RA

Yes

PL2303SA

Yes

* - PL2303H, PL-2303HX (Rev A), and PL-2303X are EOL and discontinued chips and Prolific will not

provide Windows 8 driver support. New driver versions will show yellow mark (Error Code 10) in Device

Manager for these EOL chip versions under Windows 8. Prolific recommends using PL2303HXD chip.

PL2303 Windows Driver User’s Manual

For Driver Installer v1.8.0 Release

For Microsoft Windows Operating Systems

Prolific Technology Inc. - 2 of 20 - February 26, 2013

All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding

the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial

damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be

reproduced or transmitted in any form by any means without the express written permission of the manufacturer.

Counterfeit Warning!!!

Please be warned that counterfeit/fake PL-2303HX Rev A (or PL-2303HXA) USB-to-Serial Controller

ICs using Prolific's trademark logo, brandname, and drivers, are being sold in the China market.

Counterfeit IC products show exactly the same outside chip markings but generally are of poor quality

and causes Windows driver compatibility issues (Yellow Mark Error Code 10 in Device Manager under

WinXP, Vista, and 7). This warning is issued to all customers and consumers to avoid confusion and

false purchase. Please purchase only from stores or vendors providing technical and RMA support.

Windows 7 Driver Installation

This section will guide you on how to install the PL-2303 Windows Driver. You can download the latest

Driver Installer program from Prolific Support website:

http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41

Note: Please take notice of the installation order. First, run the Driver Installer Program before

plugging in the USB to Serial adapter. If you already plug the device during the driver installation, you

need to re-plug the device for Windows to enumerate the device and load the drivers installed. If your

device is embedded to the system, you might need to restart the system (or click rescan hardware

changes in Device Manager) to reload and install the driver.

The following steps will show how to install the device under Windows 7 (64-bit) OS as this is the most

inquired driver installation support received by Prolific. The procedures are the same and straight-

forward for all other supported Windows operating system versions.

PL2303 Windows Driver User’s Manual

For Driver Installer v1.8.0 Release

For Microsoft Windows Operating Systems

Prolific Technology Inc. - 3 of 20 - February 26, 2013

All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding

the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial

damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be

reproduced or transmitted in any form by any means without the express written permission of the manufacturer.

1. Power on your computer and boot to Windows. Run or double-click the PL-2303 Windows Driver

Installer program.

2. The InstallShield Wizard will be displayed to inform you that the PL-2303 USB-to-Serial driver

will be installed on your computer. Click Next to continue.

PL2303 Windows Driver User’s Manual

For Driver Installer v1.8.0 Release

For Microsoft Windows Operating Systems

Prolific Technology Inc. - 4 of 20 - February 26, 2013

All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding

the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial

damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be

reproduced or transmitted in any form by any means without the express written permission of the manufacturer.

3. The PL-2303 Driver Installer program will then start to install the drivers needed.

4. Click the Finish button to close the InstallShield program. If you have plugged the cable into the

PC while running the setup installation, please unplug and replug the cable for the system to

detect the device.

PL2303 Windows Driver User’s Manual

For Driver Installer v1.8.0 Release

For Microsoft Windows Operating Systems

Prolific Technology Inc. - 5 of 20 - February 26, 2013

All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding

the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial

damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be

reproduced or transmitted in any form by any means without the express written permission of the manufacturer.

5. Plug in the USB to Serial adapter to the PC USB port. Windows should detect the driver as

Prolific USB-to-Serial Comm Port. Go to Device Manager and check for the “Prolific

USB-to-Serial Comm Port” device and the COM port number assigned by Windows.

6. You can also check the driver version by right-clicking on the “Prolific USB-to-Serial Comm Port”

device and select Properties and Driver tab.

评论收藏

内容反馈

zzbob

2013-08-30

我得也是win7 64位装不上
zp4206366

2013-07-12

不好用啊，囧……
zhxl852000

2014-03-07

不好用，不知道怎么回事。
zealpoon

2013-11-12

可以使用，不错，谢谢！
yasin_y

2013-08-14

电脑问题，装了没有反应。

前往

页

gz_SkyWin

粉丝: 142
资源: 74

Prolific PL-2303 驱动 (官方驱动1.8支持Win7 64位)

最新资源

Prolific PL-2303 驱动 (官方驱动1.8支持Win7 64位)

PL2303HXA驱动-解决串口不能使用的问题

Z-TEK USB转串口驱动

ztek串口驱动，usb转串口驱动

XILINX VITIS HLS 2021.2例程

PL2303GT/PL2303 驱动

串口驱动PL-2303 Driver Installer.rar

Prolific PL-2528量产工具V1.8.rar

Prolific USB-To-Serial PL-2303 for Linux.rar

PL-2303 USB转串口驱动

PL-2303 Vista专用驱动＋win７驱动

pl2303适合win7x64的驱动

PL2303HXA驱动(支持win10).7z

pl2303 win7驱动绝对可用，亲测

PL2303HX USB转TTL rs232 模块升级模块 USB转串口

PL2303_Prolific_DriverInstaller_v1_12_0

pl2303驱动-pl2303串口驱动2023 年最新版支持 Win11

PL-2303_Drivers+-+Generic_Windows_PL2303_Prolific_GPS_1013_20090319

win10 usb转串口的驱动，Prolific串口小板的驱动（PL2303）

PL2303_Prolific usb-to-serial DriverInstaller

prolific usb-to-serial 驱动

PL2303串口驱动.7z

PL2102官方最新驱动6.5，xp win7 vista 32 64位

Prolific_USB_TO_SERIAL_COMM_PORT_PL2303_FOR_WIN7_64 driver

PL2303 win10 驱动

Z-TEK(力特)USB转RS232驱动(PL2303)

WIN10平台下Prolific USB-to-Serial Comm Port驱动程序及安装方法

串口驱动 PL2303/PL2303GT

PL2303驱动 不蓝屏 支持win11-prolific usb-to-serial comm port

Prolific PL2303串口线驱动3.3.2.102版 (支持win10)下载官方最新

PL2303驱动 支持XP/WIN7/VISTA,版本较新

最新资源

PL2303驱动不蓝屏支持win11-prolific usb-to-serial comm port

PL2303驱动支持XP/WIN7/VISTA,版本较新