DCL代码生成器 (DCG)

DCL代码生成器 (DCG) v1.01 版权所有 (c) 1994, Carlos Legarreta Novemeber 8, 1994 汉化信息 ~~~~~~~~ 本程序由明经通道汉化并独家发布 明经通道：http://www.mjtd.com http://www.mccad.com E-mail: mccad@mjtd.com 版本信息 ~~~~~~~~~~~~~ 版本 说明 ------------------------------------------------------------------------ 1.00 * This version was written for and tested with AutoCAD R12 for DOS. It has been tested for a short period of time with AutoCAD R12 for Windows, without any noticiable problems found. 1.01 * Update. Fixed "DCG-ERROR-SYS: bad argument type." error and the "PROTECTED" tiles found in .DCG files. These errors were caused by the AutoLISP encription utility used to protect the shareware version of DCG. * Updated DCG.DCL, and optmized various segments of code in DCG.LSP. :NOTE: If you are using the Windows version of AutoCAD, the [HELP] function of DCG will not work properly unless you you have Release 12c3 or greater. DCG's [PRINT] command is not supported under the Windows version of AutoCAD. 许可协议 ~~~~~~~~~~~~~~~~~ DCG is not a Public Domain program and is not free. DCG is Copyright (c) 1994 by Carlos Legarreta. Non-registered users of DCG are granted a limited four-week license to evaluate the program's suitability for their requirements. Any usage of DCG beyond the evaluation time period requires registration. Use of non-registered copies of DCG beyond the original evaluation period is prohibited. DCG may NOT be modified in any respect, for any reason, including but not limited to, de-compiling, disassembling, or reverse engineering of the program. The opening title screen, help screens, and all other proprietary program output must never be altered, removed, bypassed or modified by any means. You are free to distribute the PUBLICLY AVAILABLE shareware version of DCG to others subject to the above restrictions and also the following: a) No fee is charged for its use. b) DCG must be copied in unaltered form, complete with files containing license information, documentation and all accompanying files. c) DCG may not be distributed in conjunction with any other product without the written permission from the author. System Operators may make DCG available for download only if the above conditions are met. Refer to section DISTRIBUTION FILES to verify complete package contents. Commercial distributors of "Public Domain", "Shareware", and/or user supported software may distribute DCG subject to the above conditions, and with a written permission from the author. Please refer to the registration/ordering section (ORDER.TXT) for additional information on registration. The above license statement does not apply to the REGISTERED version of DCG. For more information on registration benefits, see ORDER.TXT. 发行文件 ~~~~~~~~~~~~~~~~~~ DCG.LSP - 主程序 DCG.DCL - 对话框定义 DCG.HLP - 帮助文件 DCG.HDX - 帮助文件索引 DCG.SLD - 图标文件 DCG.PS - 文件 (PostScript(R) 格式) ORDER.TXT - 注册表格 (打印并邮寄) SAMPLE.DCG - 对话框示例 README.TXT - 说明文件 FILE_ID.DIZ - 在BBS上的程序说明。 安装 ~~~~~~~~~~~~ AutoCAD R12 for DOS ~~~~~~~~~~~~~~~~~~~ There are two ways DCG can be installed on a system. The first and most simple is by copying the distribution files to one of AutoCAD's directories (e.g., \ACAD12 or \ACAD12\SUPPORT). Make sure the directory you choose is included in the AutoCAD search path environment variable. (e.g., SET ACAD=C:\ACAD12;C:\ACAD12\SUPPORT; ... ). The second, is by creating a directory for DCG, and copying the distribution files to it. Since DCG needs to find its files during execution, this new directory must be included in the AutoCAD search path environment variable. (e.g., SET ACAD=C:\ACAD12;C:\ACAD12\SUPPORT; ... ;C:\DCG) Once installed, go into AutoCAD and from the "Command:" prompt type: Command: (load "DCG") <RETURN> Command: DCG <RETURN> AutoCAD R12 for Windows ~~~~~~~~~~~~~~~~~~~~~~~ Create a directory for DCG (e.g. C:\DCG), and copy all the distribution files to it. Go into Windows and AutoCAD, and from the "File" menu, select "Preferen- ces". Then select the "Environment" button, and include the directory where DCG is located in the "Support Dirs:" option. (e.g., c:\acadwin\support;c:\acadwin\fonts;c:\acadwin\sample;C:\DCG ) From the "Command:" prompt type: Command: (load "DCG") <RETURN> Command: DCG <RETURN> AutoCAD R13及以上版本 ~~~~~~~~~~~~~~~~~~~~~~ 你可创建一个目录(如：c:\dcg)，并将压缩的文件解压到该目录下。 在AutoCAD的工具菜单->选项->文件选项卡->支持文件搜索路径中添加你DCG文件的目录。 在命令行中输入: Command: (load "DCG") <回车> Command: DCG <回车> 即可运行该程序。 怎样与作者联系... ~~~~~~~~~~~~~~~~~~ 写信: Carlos Legarreta 14 Beacon St. Apt. #14 Lawrence, MA 01843 E-mail: legarret@titan.ucs.umass.edu (until Jan. '95)