// TI File $Revision: /main/1 $
// Checkin $Date: August 18, 2006 13:46:06 $
//###########################################################################
//
// FILE: DSP2833x_DefaultIsr.c
//
// TITLE: DSP2833x Device Default Interrupt Service Routines.
//
// This file contains shell ISR routines for the 2833x PIE vector table.
// Typically these shell ISR routines can be used to populate the entire PIE
// vector table during device debug. In this manner if an interrupt is taken
// during firmware development, there will always be an ISR to catch it.
//
// As develpment progresses, these ISR rotuines can be eliminated and replaced
// with the user's own ISR routines for each interrupt. Since these shell ISRs
// include infinite loops they will typically not be included as-is in the final
// production firmware.
//
//###########################################################################
// $TI Release: DSP2833x Header Files V1.01 $
// $Release Date: September 26, 2007 $
//###########################################################################
#include "..\INCLUDE\DSP2833x_Device.h" // DSP2833x Headerfile Include File
#include "..\INCLUDE\DSP2833x_Examples.h" // DSP2833x Examples Include File
// Connected to INT13 of CPU (use MINT13 mask):
// Note CPU-Timer1 is reserved for TI use, however XINT13
// ISR can be used by the user.
interrupt void INT13_ISR(void) // INT13 or CPU-Timer1
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// Note CPU-Timer2 is reserved for TI use.
interrupt void INT14_ISR(void) // CPU-Timer2
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void DATALOG_ISR(void) // Datalogging interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void RTOSINT_ISR(void) // RTOS interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void EMUINT_ISR(void) // Emulation interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void NMI_ISR(void) // Non-maskable interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void ILLEGAL_ISR(void) // Illegal operation TRAP
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm(" ESTOP0");
for(;;);
}
interrupt void USER1_ISR(void) // User Defined trap 1
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER2_ISR(void) // User Defined trap 2
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER3_ISR(void) // User Defined trap 3
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER4_ISR(void) // User Defined trap 4
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER5_ISR(void) // User Defined trap 5
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER6_ISR(void) // User Defined trap 6
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER7_ISR(void) // User Defined trap 7
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER8_ISR(void) // User Defined trap 8
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER9_ISR(void) // User Defined trap 9
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER10_ISR(void) // User Defined trap 10
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER11_ISR(void) // User Defined trap 11
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER12_ISR(void) // User Defined trap 12
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// -----------------------------------------------------------
// PIE Group 1 - MUXed into CPU INT1
// -----------------------------------------------------------
// INT1.1
interrupt void SEQ1INT_ISR(void) //SEQ1 ADC
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.2
interrupt void SEQ2INT_ISR(void) //SEQ2 ADC
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm(" ESTOP0");
for(;;);
}
// INT1.3 - Reserved
// INT1.4
interrupt void XINT1_ISR(void)
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.5
interrupt void XINT2_ISR(void)
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.6
interrupt void ADCINT_ISR(void) // ADC
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.7
interrupt void TINT0_ISR(void) // CPU-Timer 0
{
// Insert IS
没有合适的资源?快使用搜索试试~ 我知道了~
资源推荐
资源详情
资源评论
收起资源包目录
CCS6.2版本Dsp28335工程(包含基本模块的源文件和头文件) (102个子文件)
DSP2833x_CodeStartBranch.asm 3KB
DSP2833x_usDelay.asm 3KB
DSP2833x_ADC_cal.asm 1KB
DSP2833x_DefaultIsr.c 30KB
DSP2833x_ECan.c 18KB
DSP2833x_SysCtrl.c 12KB
DSP2833x_GlobalVariableDefs.c 11KB
DSP2833x_Xintf.c 9KB
DSP2833x_PieVect.c 7KB
DSP2833x_Adc.c 5KB
DSP2833x_Spi.c 4KB
DSP2833x_CpuTimers.c 4KB
DSP2833x_PieCtrl.c 3KB
main.c 2KB
.ccsproject 327B
DSP2833x_Headers_nonBIOS.cmd 8KB
F28335.cmd 5KB
28335_RAM_lnk.cmd 4KB
.cproject 31KB
DSP2833x_SWPrioritizedIsrLevels.h 142KB
DSP2833x_ECan.h 44KB
DSP2833x_Mcbsp.h 31KB
DSP2833x_EPwm.h 16KB
DSP2833x_Gpio.h 16KB
DSP2833x_DMA.h 13KB
DSP2833x_SysCtrl.h 13KB
DSP2833x_Adc.h 10KB
DSP2833x_EQep.h 10KB
DSP2833x_GlobalPrototypes.h 8KB
DSP2833x_Sci.h 8KB
DSP2833x_I2c.h 7KB
DSP2833x_PieVect.h 6KB
DSP2833x_DefaultIsr.h 6KB
DSP2833x_Spi.h 6KB
DSP2833x_ECap.h 6KB
DSP2833x_PieCtrl.h 6KB
DSP2833x_CpuTimers.h 6KB
DSP2833x_Device.h 6KB
DSP2833x_Examples.h 5KB
DSP2833x_I2c_defines.h 4KB
DSP2833x_EPwm_defines.h 4KB
DSP2833x_Xintf.h 4KB
DSP2833x_DevEmu.h 3KB
DSP2833x_XIntrupt.h 2KB
DSP2833x_Dma_defines.h 2KB
DSP2833x_Project.h 720B
x_Dsp28335_Template.launch 4KB
Debug.lkf 3KB
project.log 324B
cc_build_Debug.log 135B
makefile 6KB
Gotten_DA_AD.map 28KB
subdir_rules.mk 8KB
subdir_vars.mk 4KB
subdir_rules.mk 2KB
sources.mk 2KB
subdir_rules.mk 1002B
subdir_vars.mk 592B
subdir_vars.mk 556B
objects.mk 261B
DSP2833x_GlobalVariableDefs.obj 119KB
AD.obj 118KB
Cap_Init.obj 114KB
CKalmanFilter.obj 111KB
EPwm.obj 110KB
Init.obj 42KB
Can_Read.obj 41KB
DSP2833x_DefaultIsr.obj 34KB
Can.obj 30KB
DSP2833x_PieVect.obj 18KB
SCI.obj 17KB
DSP2833x_SysCtrl.obj 16KB
DSP2833x_Xintf.obj 16KB
main.obj 13KB
Butterworth_IIR.obj 10KB
Signal_generate.obj 10KB
Kalman.obj 10KB
DA_Out.obj 8KB
SPI.obj 8KB
39VF1601.obj 7KB
DSP2833x_CpuTimers.obj 6KB
DSP2833x_PieCtrl.obj 6KB
PID.obj 4KB
DSP2833x_CodeStartBranch.obj 2KB
DSP2833x_usDelay.obj 1KB
DSP2833x_ADC_cal.obj 1KB
ccsObjs.opt 884B
Gotten_DA_AD.out 130KB
x_Dsp28335_Template.pjt 3KB
DSP2833x_DefaultIsr.pp 5KB
DSP2833x_CpuTimers.pp 5KB
DSP2833x_SysCtrl.pp 5KB
DSP2833x_PieVect.pp 5KB
DSP2833x_PieCtrl.pp 5KB
DSP2833x_Xintf.pp 5KB
DSP2833x_GlobalVariableDefs.pp 4KB
main.pp 3KB
org.eclipse.core.resources.prefs 378B
org.eclipse.cdt.debug.core.prefs 123B
org.eclipse.cdt.codan.core.prefs 62B
共 102 条
- 1
- 2
Dexter_Dream
- 粉丝: 9
- 资源: 7
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- NetOps-py通过sftp替换网络设备启动文件
- STM32单片机FPGA毕设电路原理论文报告任务驱动教学法在单片机课程教学中的应用
- STM32单片机FPGA毕设电路原理论文报告任务驱动法在单片机教学中的应用
- STM32单片机FPGA毕设电路原理论文报告人造金刚石压机智能化压力测控系统设计
- 以某列为依据匹配多项(Excel版)
- STM32单片机FPGA毕设电路原理论文报告人体短臂离心机实验台的显示控制系统
- STM32单片机FPGA毕设电路原理论文报告人工气候室监控系统的环境控制器研究
- STM32单片机FPGA毕设电路原理论文报告染整自动线张力控制系统的设计
- 数据挖掘与机器学习-实验
- 基于Linux系统Nginx的动态网站的LNMP环境源码包
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功
- 1
- 2
前往页