Page 5
STM32407_ETH_RMII Project
Configuration Report
5. IPs and Middleware Configuration
5.1. ETH
Mode: RMII
5.1.1. Parameter Settings:
Advanced : Ethernet Media Configuration:
Auto Negotiation Enabled
General : Ethernet Configuration:
Ethernet MAC Address 00:80:E1:00:00:00
PHY Address 1
Ethernet Basic Configuration:
Rx Mode Polling Mode
TX IP Header Checksum Computation By hardware
5.1.2. Advanced Parameters:
External PHY Configuration:
PHY
user PHY *
PHY Address Value 1
PHY name
LAN8720A *
PHY Reset delay these values are based on a 1 ms
Systick interrupt
0x000000FF *
PHY Configuration delay
0x00000FFF *
PHY Read TimeOut
0x0000FFFF *
PHY Write TimeOut
0x0000FFFF *
Common : External PHY Configuration:
Transceiver Basic Control Register
0x00 *
Transceiver Basic Status Register
0x01 *
PHY Reset
0x8000 *
Select loop-back mode
0x4000 *
Set the full-duplex mode at 100 Mb/s
0x2100 *
Set the half-duplex mode at 100 Mb/s
0x2000 *
Set the full-duplex mode at 10 Mb/s
0x0100 *
Set the half-duplex mode at 10 Mb/s
0x0000 *