SecureCRT(R) 6.1.4 (Official) -- February 24, 2009
Copyright (C) 1995-2009 VanDyke Software, Inc.
All rights reserved.
This file contains a SecureCRT product history. It includes lists
of new features, changes, and bug fixes sorted by release. For a
product description, installation notes, registration information,
and contact information, please refer to Readme.txt (downloaded
with this installation).
Changes in SecureCRT 6.1.4 (Official) -- February 24, 2009
----------------------------------------------------------
Bug fixes:
- If a custom menu file that contained MENU_SCRIPT_MRU_FILE1 was
used, selecting a script from the recently used script list could
launch the wrong script.
- If the "User Arranged Tree" option was set in the Connect dialog
and sessions were rearranged, the changes were not saved.
- If two sessions had different color schemes and a session was
sent to a new window, and then a session was dragged into the
other window, it had the first tabbed session's color scheme.
- Selecting "Print Setup" from the File menu always displayed the
printer settings for the first tabbed session.
- RLogin: RLogin sessions could disconnect after a large amount of
data was received.
- SSH1/SSH2: An X11 forwarding request succeeded when it should have
failed because a different user connected.
Changes in SecureCRT 6.1.3 (Official) -- December 2, 2008
---------------------------------------------------------
Changes:
- SSH2: The default cipher list has been modified to prefer the AES
ciphers in CTR mode. This change was made to address a potential
vulnerability. See the following web page for more information.
http://www.vandyke.com/support/advisory/2008/12/cpni-957037.html
Bug fixes:
- SecureCRT could crash if the "Auto reconnect" option was set
and the username was changed when attempting to connect to a
server that does not allow the username to change.
- If the INI-file-only global option "Disable Close" was set and
SecureCRT was closed using the red "X", SecureCRT hung.
- If a script was specified on the command line and the "Show
connect dialog on startup" option was set, the Connect dialog
was displayed.
- If there was an error during script recording and the error
message was longer than 64K, the message could not be displayed.
Changes in SecureCRT 6.1.2 (Official) -- November 6, 2008
---------------------------------------------------------
Changes:
- SSH2: In the session .INI file, if the GEX Preferred Size was
set to 2046, it will be changed to 2048 in order to be compatible
with Cisco IOS 12.4 or later.
Bug fixes:
- If a script was specified on the command line, SecureCRT was
in a hung state after the script executed.
- With ANSI color enabled, if a color escape sequence was
received, only the portion of the row that contained characters
was correctly displayed.
- SSH2: In an SFTP tab, if the connection was lost and a put
command was issued, SecureCRT crashed.
Changes in SecureCRT 6.1.1 (Official) -- October 2, 2008
--------------------------------------------------------
Bug fixes:
- If the auto-reconnect option was set for a session and the
connection was lost, an error dialog was displayed. The 5.5
behavior of not displaying a dialog was restored.
- If the session option "Display logon prompts in terminal window"
was not set and a logon script was specified, the script was
started before the connection was established. The 6.0 behavior
of starting the script after the connection is established was
restored.
- Logon scripts were run when the administrative option to disallow
scripts from being run in SecureCRT was set.
- If the global option "Show confirm disconnect dialog" was set and
multiple sessions were open in different windows, exiting the
Activator could cause SecureCRT to crash.
- SecureCRT crashed when cancelling out of the select log file
dialog if the session tab no longer existed.
- In the Connect dialog, doing a Find Next after deleting a session
that had been found using Find caused SecureCRT to crash.
- In the Global Options dialog, on the Firewall page, double-
clicking the empty space below the firewall list or pressing the
DEL key when no firewall was selected caused SecureCRT to crash.
- After answering "No" to the confirm disconnect dialog, SecureCRT
became unresponsive.
- Under certain circumstances, if there were multiple SecureCRT
windows and the menu bar was toggled, SecureCRT could become
unresponsive.
- After selecting text in the scrollback buffer using a triple-
click, it was no longer possible to select text in the scrollback
buffer.
- If the SecureCRT window was maximized after scrolling up, garbage
was displayed in the session window.
- If an "exit" command was sent to a session in a script and then
another connection was immediately attempted, it could cause the
script to hang.
- If a session was connected using the Session.Connect(/s <session>)
scripting method, the initial position specified in the session
options was not honored.
- SSH2: The TCP connection associated with a dynamic port forward
could get stuck in a CLOSE_WAIT state after the session was
disconnected.
- SSH2: Under certain circumstances, dynamic port forwarding was not
started when a session was connected.
- SSH1/SSH2: If the session option "Start log upon connect" was set
and no log file was specified, when connecting to the session,
after entering the password, focus went to the session window
instead of the Select Log File dialog.
- Global Secure Shell configuration information was not being
migrated.
- If two sessions had the same name, hostname, and username, they
were combined during migration, but only the terminal protocol
was set.
Changes in SecureCRT 6.1 (Official) -- August 21, 2008
------------------------------------------------------
Bug fixes:
- Under certain circumstances, SecureCRT could not write log files
to a mapped drive.
- Under certain circumstances, when Quick Connect was used to make
multiple connections, the authentication dialog was associated
with the initial session window.
- If nothing had previously been typed into the session window,
pressing ALT+<numeral> sent the number to the session rather than
switching to the specified tab.
- When Windows was configured to use large fonts (120 DPI), some
text in the Session Options dialog did not fit in the dialog.
- If a URL that spanned multiple lines had extra spaces at the end
of a line, the extra spaces were not removed when the URL was
opened.
- Serial: After a serial session was disconnected, the tab connec-
tion status indicator was not updated to reflect that the session
had been disconnected.
Changes in SecureCRT 6.1 (Beta 4) -- July 31, 2008
--------------------------------------------------
Changes:
- SSH2: Because of a limitation in some recent versions of Cisco's
IOS which resulted in SecureCRT not being able to connect, the
diffie-hellman-group-exchange key exchange algorithm was modified
to send a different maximum size for the modulus.
Bug fixes:
- SecureCRT crashed when running a script that attempted to connect
to multiple sessions.
- Calling Config.GetOption("Password") in a script caused SecureCRT
to crash.
- After calling the script Session object method Connect, execution
of the script continued regardless of whether or not
authentication had completed.
- When the global option "CTRL+TAB switches to mo
没有合适的资源?快使用搜索试试~ 我知道了~
资源推荐
资源详情
资源评论
收起资源包目录
SecureCRTchs (191个子文件)
session1.bmp 1KB
session2.bmp 1KB
session3.bmp 1KB
send.bmp 346B
SecureCRT.chm 744KB
cryptocme2.dll 3.11MB
SSH2Core61U.dll 1.27MB
ConnectDialog61U.dll 1.11MB
mfc80u.dll 1.04MB
SSH2.dll 717KB
License44U.dll 689KB
SSH2Client61U.dll 613KB
msvcr80.dll 612KB
msvcp80.dll 536KB
TelnetSsl.dll 221KB
Tapi.dll 205KB
Serial.dll 169KB
Telnet.dll 169KB
Rlogin.dll 153KB
MFC80ENU.dll 56KB
SSH1.enable 16B
SecureCRT.exe 3.93MB
migrate.exe 1.16MB
Activator.exe 253KB
VT100W.FON 62KB
VT100DT.FON 62KB
VT100DB.FON 62KB
VT100.FON 44KB
南京C2-CRS.ini 9KB
东大楼核心ddl-cisco-hexin.ini 9KB
长乐路GSR.ini 9KB
无锡D4.ini 9KB
仪征yzh-cisco-huiju.ini 9KB
Global.ini 9KB
JS-HA-SDJ-A-2.CN2.ini 9KB
JS-YZ-DBL-A-1.CN2.ini 9KB
JS-WX-GM-A-1.CN2.ini 9KB
南京C3-CRS.ini 9KB
南京D4.ini 9KB
JS-HA-GCJ-S-1.CN2.ini 9KB
JS-HA-GCJ-A-1.CN2.ini 9KB
连云港JS-LYG-HLJ-A-1.CN2.ini 9KB
JS-SQ-XFLJ-A-1.CN2.ini 9KB
南京JS-NJ-YFXJ-S-1.CN2.ini 9KB
JS-NT-CQ-A-1.CN2.ini 9KB
JS-YZ-DBL-S-2.CN2.ini 9KB
开发区汇聚02kfq-cisco-huiju.ini 9KB
JS-YZ-ZHL-A-2.CN2.ini 9KB
YFXJ-IDC汇聚12816.ini 9KB
南京JS-NJ-GL-C-1.CN2.ini 9KB
Global.ini 9KB
Global.ini 9KB
JS-YZ-ZHL-S-1.CN2.ini 9KB
南京DXG-RR.ini 9KB
南京GL-RR.ini 9KB
5000E.ini 9KB
无锡IDC汇聚.ini 9KB
常州A1.ini 9KB
常州A2.ini 9KB
南京YFXJ-CRS-1.ini 9KB
南京GL-CRS-1.ini 9KB
南京RR.ini 9KB
南京D3-CRS.ini 9KB
无锡D3CRS.ini 9KB
南京D1.ini 9KB
无锡D1.ini 9KB
南京JS-NJ-GL-S-2.CN2.ini 9KB
无锡RR.ini 8KB
Default.ini 8KB
Default.ini 8KB
Default.ini 8KB
宝应by-cisco-huiju.ini 8KB
开发区核心kfq-cisco-hexin.ini 8KB
胥浦xp-cisco-huiju.ini 8KB
东大楼汇聚ddl-cisco-huiju.ini 8KB
开发区汇聚01kfq-cisco-huiju.ini 8KB
鼓楼GSR.ini 8KB
大行宫GSR.ini 8KB
新庄GSR.ini 7KB
汉中门GSR.ini 7KB
云南路GSR.ini 7KB
高邮gy-cisco-huiju.ini 7KB
221.231.205.12.ini 7KB
东大楼核心ddl-cisco-hexin (1).ini 7KB
三元路syl-cisco-huiju.ini 7KB
江都jd02-cisco-huiju688.ini 7KB
江都jd-cisco-huiju.ini 7KB
JS-SZ-LQF-A-1.CN2.ini 7KB
JS-SZ-CX-A-2.CN2.ini 7KB
JS-NT-CQ-S-1.CN2.ini 7KB
JS-YC-836J-S-1.CN2.ini 7KB
JS-SQ-XDL-A-2.CN2.ini 7KB
连云港JS-LYG-LHJ-A-2.CN2.ini 7KB
JS-SZ-LQF-S-2.CN2.ini 7KB
JS-SZ-CX-S-1.CN2.ini 7KB
连云港JS-LYG-HLJ-S-1.CN2.ini 7KB
南京JS-NJ-YFXJ-S-3.CN2.ini 7KB
JS-WX-HG-A-2.CN2.ini 7KB
JS-NT-YJQ-S-2.CN2.ini 7KB
JS-ZJ-ZHL-A-2.CN2.ini 7KB
共 191 条
- 1
- 2
资源评论
angelafly415
- 粉丝: 15
- 资源: 9
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功