/**
@page RTC_Calendar RTC_Calendar
@verbatim
******************** (C) COPYRIGHT 2009 STMicroelectronics *******************
* @file RTC/Calendar/readme.txt
* @author MCD Application Team
* @version V3.0.0
* @date 04/06/2009
* @brief Description of the RTC Calendar Example.
******************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
******************************************************************************
@endverbatim
@par Example Description
This example demonstrates and explains how to use the RTC peripheral.
As an application example, it demonstrates how to setup the RTC peripheral, in terms
of prescaler and interrupts, to be used to keep time and to generate Second interrupt.
The Low Speed External (LSE) clock is used as RTC clock source.
The RTC clock can be output on the Tamper pin (PC.13). To enable this functionality,
uncomment the corresponding line: #define RTCClockOutput_Enable in the main.c file.
The RTC is in the backup (BKP) domain, still powered by VBAT when VDD is switched off,
so the RTC configuration is not lost if a battery is connected to the VBAT pin.
A key value is written in backup data register1 (BKP_DR1) to indicate if the RTC
is already configured.
The program behaves as follows:
1. After startup the program checks the backup data register1 value:
- register1 value not correct: (BKP_DR1 value is not correct or has not yet
been programmed when the program is executed for the first time) the RTC is
configured and the user is asked to set the time (entered on HyperTerminal).
- register1 value correct: this means that the RTC is configured and the time
is displayed on HyperTerminal.
2. When an External Reset occurs the BKP domain is not reset and the RTC configuration
is not lost.
3. When power on reset occurs:
- If a battery is connected to the VBAT pin: the BKP domain is not reset and
the RTC configuration is not lost.
- If no battery is connected to the VBAT pin: the BKP domain is reset and the
RTC configuration is lost.
In the RTC interrupt service routine, a specific GPIO pin toggles every 1 s.
The C library printf function is retargeted to the USART1, that is, the printf
message is output to the HyperTerminal using USART1.
@par Directory contents
- RTC/Calendar/platform_config.h Evaluation board specific configuration file
- RTC/Calendar/stm32f10x_conf.h Library Configuration file
- RTC/Calendar/stm32f10x_it.c Interrupt handlers
- RTC/Calendar/stm32f10x_it.h Header for stm32f10x_it.c
- RTC/Calendar/main.c Main program
@par Hardware and Software environment
- This example runs on STM32F10x High-Density, STM32F10x Medium-Density and
STM32F10x Low-Density Devices.
- This example has been tested with STMicroelectronics STM3210E-EVAL (STM32F10x
High-Density) and STM3210B-EVAL (STM32F10x Medium-Density) evaluation boards
and can be easily tailored to any other supported device and development
board.
To select the STMicroelectronics evaluation board used to run the example,
uncomment the corresponding line in platform_config.h file.
- STM3210E-EVAL Set-up
- Use LD1 led connected to PF.06.
- The USART1 signals (Rx, Tx) must be connected to a DB9 connector using a RS232
transceiver.
- Connect a null-modem female/female RS232 cable between the DB9 connector
(CN12 on STM3210B-EVAL board) and PC serial port.
- Hyperterminal configuration:
- Word Length = 8 Bits
- One Stop Bit
- No parity
- BaudRate = 115200 baud
- flow control: None
- Connect a 3V battery on Vbat pin (already mounted on STM3210E-EVAL board)
- STM3210B-EVAL Set-up
- Use LD1 led connected to PC.06.
- The USART1 signals (Rx, Tx) must be connected to a DB9 connector using a RS232
transceiver.
- Connect a null-modem female/female RS232 cable between the DB9 connector
(CN6 on STM3210B-EVAL board) and PC serial port.
- Hyperterminal configuration:
- Word Length = 8 Bits
- One Stop Bit
- No parity
- BaudRate = 115200 baud
- flow control: None
- Connect a 3V battery on Vbat pin (already mounted on STM3210B-EVAL board)
@par How to use it ?
In order to make the program work, you must do the following :
- Create a project and setup all project configuration
- Add the required Library files :
- stm32f10x_gpio.c
- stm32f10x_rcc.c
- stm32f10x_rtc.c
- stm32f10x_bkp.c
- stm32f10x_pwr.c
- misc.c
- stm32f10x_usart.c
- system_stm32f10x.c
- Edit stm32f10x.h file to select the device you are working on.
@b Tip: You can tailor the provided project template to run this example, for
more details please refer to "stm32f10x_stdperiph_lib_um.chm" user
manual; select "Peripheral Examples" then follow the instructions
provided in "How to proceed" section.
- Link all compiled files and load your image into target memory
- Run the example
@note
- Low-density devices are STM32F101xx and STM32F103xx microcontrollers where
the Flash memory density ranges between 16 and 32 Kbytes.
- Medium-density devices are STM32F101xx and STM32F103xx microcontrollers where
the Flash memory density ranges between 32 and 128 Kbytes.
- High-density devices are STM32F101xx and STM32F103xx microcontrollers where
the Flash memory density ranges between 256 and 512 Kbytes.
* <h3><center>© COPYRIGHT 2009 STMicroelectronics</center></h3>
*/
stm32f10x_stdperiph_lib_v3.0.0.rar
需积分: 10 148 浏览量
2014-09-15
22:59:07
上传
评论
收藏 1.74MB RAR 举报
stm32f10x_stdperiph_lib_v3.0.0.rar （646个子文件） 
STM3210B-EVAL.sim._1 1KB STM3210E-EVAL.axf 232KB STM3210B-EVAL.axf 231KB Project_Uv2.Bak 7KB Project_Opt.Bak 5KB STM3210E-EVAL_sct.Bak 479B Project.cspy.bat 3KB
logo.bmp 7KB stm32f10x_tim.c 100KB sdcard.c 88KB stm32f10x_adc.c 46KB stm32f10x_i2c.c 36KB stm32f10x_fsmc.c 34KB stm32f10x_usart.c 34KB stm32f10x_rcc.c 33KB stm32f10x_can.c 30KB stm32f10x_sdio.c 28KB stm32f10x_spi.c 27KB stm32f10x_dma.c 27KB stm32f10x_flash.c 26KB system_stm32f10x.c 24KB fsmc_nand.c 18KB stm32f10x_gpio.c 17KB startup_stm32f10x_hd.c 16KB core_cm3.c 16KB spi_flash.c 15KB fsmc_nor.c 14KB fsmc_nor.c 14KB stm32f10x_dac.c 13KB main.c 13KB startup_stm32f10x_md.c 13KB startup_stm32f10x_ld.c 12KB main.c 12KB i2c_ee.c 12KB main.c 11KB main.c 11KB main.c 11KB main.c 10KB main.c 10KB main.c 10KB main.c 10KB main.c 10KB main.c 10KB main.c 10KB main.c 10KB main.c 10KB main.c 10KB stm3210_eval.c 9KB main.c 9KB lib_dbg.c 9KB main.c 9KB main.c 9KB main.c 9KB main.c 9KB main.c 9KB stm32f10x_it.c 9KB stm32f10x_it.c 9KB main.c 9KB stm32f10x_pwr.c 9KB main.c 9KB main.c 9KB main.c 9KB main.c 9KB stm32f10x_rtc.c 8KB main.c 8KB main.c 8KB main.c 8KB main.c 8KB stm32f10x_bkp.c 8KB main.c 8KB main.c 8KB main.c 8KB main.c 8KB main.c 8KB main.c 8KB main.c 7KB main.c 7KB main.c 7KB main.c 7KB main.c 7KB main.c 7KB main.c 7KB main.c 7KB main.c 7KB main.c 7KB main.c 7KB main.c 7KB main.c 7KB main.c 7KB fsmc_sram.c 7KB fsmc_sram.c 7KB main.c 7KB main.c 7KB main.c 7KB main.c 7KB misc.c 7KB main.c 7KB stm32f10x_exti.c 7KB stm32f10x_it.c 7KB main.c 6KB共 646 条
- 1
- 2
- 3
- 4
- 5
- 6
- 7
资源评论
