jacob.jar jacob-1.19-x64.dll jacob-1.19-x86.dll

jacob-1.19-x64.dll jacob-1.19-x86.dll jacob.jar LICENSE.TXT BuildingJacobFromSource.html EventCallbacks.html JacobComLifetime.html JacobThreading.html ReleaseNotes.html UsingJacob.html allclasses-frame.html allclasses-noframe.html constant-values.html deprecated-list.html help-doc.html index-all.html index.html overview-frame.html overview-summary.html overview-tree.html package-list script.js serialized-form.html stylesheet.css ComException.html ComFailException.html ComThread.html Currency.html DateUtilities.html Dispatch.html DispatchEvents.html DispatchIdentifier.html DispatchProxy.html EnumVariant.html InvocationProxy.html InvocationProxyAllVariants.html JacobException.html JacobObject.html JacobReleaseInfo.html LibraryLoader.html MainSTA.html NotImplementedException.html package-frame.html package-summary.html package-tree.html package-use.html ROT.html SafeArray.html STA.html Variant.html VariantUtilities.html VariantViaEvent.html WrongThreadException.html ComException.html ComFailException.html ComThread.html Currency.html DateUtilities.html Dispatch.html DispatchEvents.html DispatchIdentifier.html DispatchProxy.html EnumVariant.html InvocationProxy.html InvocationProxyAllVariants.html JacobException.html JacobObject.html JacobReleaseInfo.html LibraryLoader.html MainSTA.html NotImplementedException.html ROT.html SafeArray.html STA.html Variant.html VariantUtilities.html VariantViaEvent.html WrongThreadException.html ActiveXComponent.html ActiveXDispatchEvents.html ActiveXInvocationProxy.html package-frame.html package-summary.html package-tree.html package-use.html ActiveXComponent.html ActiveXDispatchEvents.html ActiveXInvocationProxy.html

c2960-lanbasek9-tar.150-2.SE10a.tar

c2960-lanbasek9-tar.150-2.SE10a.tar Release Notes for the Catalyst 3750, 3560, 3560-C, 2960, 2960-S, 2960-C, and 2960-Plus Switches, Cisco IOS Release 15.0(2)SE and Later 30/Aug/2018UPDATED

cmake-3.9.2.tar.gz

https://cmake.org/download/ CMake下载 About Resources Developer Resources Download Search … Get the Software You can either download binaries or source code archives for the latest stable or previous release or access the current development (aka nightly) distribution through Git. This software may not be exported in violation of any U.S. export laws or regulations. For more information regarding Export Control matters please go to https://www.kitware.com/legal. Join the mailing list CMake success stories Attend a training course Buy the book Purchase support Latest Release (3.9.2) The release was packaged with CPack which is included as part of the release. The .sh files are self extracting gziped tar files. To install a .sh file, run it with /bin/sh and follow the directions. The OS-machine.tar.gz files are gziped tar files of the install tree. The OS-machine.tar.Z files are compressed tar files of the install tree. The tar file distributions can be untared in any directory. They are prefixed by the version of CMake. For example, the Linux-x86_64 tar file is all under the directory cmake–Linux-x86_64. This prefix can be removed as long as the share, bin, man and doc directories are moved relative to each other. To build the source distributions, unpack them with zip or tar and follow the instructions in Readme.txt at the top of the source tree. See also the CMake 3.9 Release Notes. Source distributions: Platform Files Unix/Linux Source (has \n line feeds) cmake-3.9.2.tar.gz cmake-3.9.2.tar.Z Windows Source (has \r\n line feeds) cmake-3.9.2.zip https://cmake.org/files/v3.9/cmake-3.9.2.tar.gz

c2918-lanlitek9-mz.122-58.SE2.bin

思科C2918交换机IOS文件，版本12.2(58)SE2,支持ip dhcp snooping，思科官网已经停止下载支持，2020年10月底关闭思科TAC支持，具体详细情况可以参见以下官方网址进一步查看ios明细功能支持 https://www.cisco.com/c/dam/en/us/td/docs/switches/lan/catalyst2918/software/release/12-2_55_se/release/notes/OL23020.pdf

ap3g2-k9w8-tar.153-3.JF10.tar

Lightweight AP IOS Software - 15.3.3-JF10(ED) Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Release 15.3(3)JF, 15.3(3)JF1, 15.3(3)JF4, 15.3(3)JF5, 15.3(3)JF7, 15.3(3)JF8, 15.3(3)JF9, and 15.3(3)JF10

Red_Hat_Enterprise_Linux-6-Technical_Notes-en-US.pdf

Red_Hat_Enterprise_Linux-6-Technical_Notes-en-US.pdf

moozat-pyv8-binaries-master.zip

yV8 Binaries ============= Archive of pre-compiled PyV8 binaries, used by Emmet for Sublime Text plugin. ## Manual installation If you experience issues with automatic PyV8 download of [Emmet for Sublime Text plugin](https://github.com/sergeche/emmet-sublime), you can manually install it: 1. Download PyV8 binary for your OS version (see notes below). 2. For Sublime Text 2 Unpack contents of downloaded archive into `PyV8/%filename%` folder inside Sublime Text Packages (find `Browse Packages...` menu item in ST2 editor to get into Packages folder), where `%filename%` is the name of downloaded file (e.g. it will be `pyv8-win64-p3` if you download `pyv8-win64-p3.zip` file). 3. For Sublime Text 3 Unpack contents of downloaded archive into `PyV8/%filename%` folder inside Sublime Text Installed Packages (find `Browse Packages...` menu item under preferences in ST3 editor to get into Packages folder, go up one level and go into Installed Packages), where `%filename%` is the name of downloaded file (e.g. it will be `pyv8-win64-p3` if you download `pyv8-win64-p3.zip` file). 4. Restart ST editor. ## Download For Sublime Text 2 (Python 2.6): * [Windows x32](https://github.com/emmetio/pyv8-binaries/raw/master/pyv8-win32.zip) * [Windows x64](https://github.com/emmetio/pyv8-binaries/raw/master/pyv8-win64.zip) * [OSX 10.7+](https://github.com/emmetio/pyv8-binaries/raw/master/pyv8-osx.zip) * [OSX 10.6](https://github.com/emmetio/pyv8-binaries/raw/master/pyv8-mac106.zip) * [Linux x32](https://github.com/emmetio/pyv8-binaries/raw/master/pyv8-linux32.zip) * [Linux x64](https://github.com/emmetio/pyv8-binaries/raw/master/pyv8-linux64.zip) For Sublime Text 3 (Python 3.3): * [Windows x32](https://github.com/emmetio/pyv8-binaries/raw/master/pyv8-win32-p3.zip) * [Windows x64](https://github.com/emmetio/pyv8-binaries/raw/master/pyv8-win64-p3.zip) * [OSX 10.7+](https://github.com/emmetio/pyv8-binaries/raw/master/pyv8-osx-p3.zip) * [Linux x32](https://github.com/emmetio/pyv8-binaries/raw/master/pyv8-linux32-p3.zip) * [Linux x64](https://github.com/emmetio/pyv8-binaries/raw/master/pyv8-linux64-p3.zip)

rabbitmq-server-3.8.8-1.el6.noarch.rpm

对应的erlang环境的版本如下： Erlang/OTP 23 compatibility notes Erlang 22.x or 23.x is recommended Erlang 22.x dropped support for HiPE

BatteryManagementStudio-1.3.86_Build6-windows-installer.exe

bqSBB Version 1.3.86 Release Notes ---------------------------------- Reverted chemistry changes for hex ID support Programming: Resolved possible issue with programming error DataFlash: Resolved issue of negative floats not accepted Commands: Resolved issue with seal/unseal

JavaObjectModel-notes.pdf

JavaObjectModel-notes.pdfJavaObjectModel-notes.pdfJavaObjectModel-notes.pdfJavaObjectModel-notes.pdf

yasm-1.3.0.tar.gz

http://www.linuxfromscratch.org/blfs/view/svn/general/yasm.html Introduction to yasm Yasm is a complete rewrite of the NASM-2.14.02 assembler. It supports the x86 and AMD64 instruction sets, accepts NASM and GAS assembler syntaxes and outputs binary, ELF32 and ELF64 object formats. This package is

MegaCli8.07.10.tar.gz

查看配置管理raid Prerequisite for MegaCli installation ========================== The MegaRAID ® MegaCli application depends on few standard libraries. Please ensure that these libraries are present in the system before installing MegaCli rpm. MegaCli will not function without these libraries. For your convenience, above libraries are available in the rpm <Lib_Utils-1.xx-xx.noarch.rpm> and <Lib_Utils2-1.xx-xx.noarch.rpm>. <Lib_Utils-1.xx-xx.noarch.rpm> and <Lib_Utils2-1.xx-xx.noarch.rpm> are packaged in the MegaCli zip file. To install the <Lib_Utils-1.xx-xx.noarch.rpm> and <Lib_Utils2-1.xx-xx.noarch.rpm>, please follow below steps. 1) unzip the MegaCli package . 2) To install the Lib_Utils RPM, run the command "rpm -ivh <Lib_Utils-1.xx-xx.noarch.rpm>" 3) To install the Lib_Utils2 RPM, run the command "rpm -ivh <Lib_Utils2-1.xx-xx.noarch.rpm>" 4) To install the MegaCli RPM, run the comand "rpm -ivh <MegaCli-x.xx-x.noarch.rpm>" 5) To upgrade the MegaCli RPM, run the comand "rpm -Uvh <MegaCli-x.xx-x.noarch.rpm>" Installation of MegaCLI on Ubuntu (conversion of RPM to debian package) ======================================================================== 1) alien -k MegaCli-x.xx-x.noarch.rpm This command generates debian package <megacli_x.xx.xx-x_all.deb> 2) dpkg -i megacli_x.xx.xx-x_all.deb This command installs MegaCLI Debian package at /opt/MegaRAID/MegaCli directory. Notes: 1. If older version of the libutil or libutil2 rpm (i.e. <Lib_Utils-1.xx-xx.noarch.rpm> or <Lib_Utils2-1.xx-xx.noarch.rpm>) is installed on the system, please uninstall the older version of the RPM using the command "rpm -e <Lib_Utils-1.xx-xx>" or "rpm -e <Lib_Utils2-1.xx-xx>" and then install the latest libutil rpm <Lib_Utils-1.xx-xx.noarch.rpm> or <Lib_Utils-1.xx-xx> packaged in this zip file. 2. If older version of the libutil rpm <Lib_Utils-1.xx-xx.noarch.rpm> is installed on the system, To perform upgrade from previous version to latest version run the command "rpm -Uvh --nopostun <Lib_Utils-1.xx-xx.rpm> ". 3. If older version of the libutil rpm <Lib_Utils2-1.xx-xx.noarch.rpm> is installed on the system, To perform upgrade from previous version to latest version run the command "rpm -Uvh --nopostun <Lib_Utils2-1.xx-xx.rpm> ". Example: If "Lib_Utils-1.00-06.noarch.rpm" is installed on the target system to to perform upgrade to latest RPM "Lib_Utils-1.00-07.noarch.rpm" run the command "rpm -Uvh --nopostun Lib_Utils-1.00-07.noarch.rpm". 4. On RHEL-3 (X64) and SLES-9 (X64), MegaCli requires libstdc++.so.6. It is assumed that these standard libraries are present in the system.

BatteryManagementStudio-1.3.101_Build1-windows-installer.exe

bqSBB Version 1.3.101 Release Notes ---------------------------------- Calibration updates for BQ76942 and BQ76952 A3 Removed support for parameter view bqSBB Version 1.3.100 Release Notes ---------------------------------- SPI Master Configuration for bq769x2: Remove SPIMasterCfg class and keep

TortoiseSVN-1.11.1.28492-x64-svn-1.11.1.msi

当前版本是 1.11.1 最新更新内容，请查看 changelog and the release notes. 当前版本 1.11.1 连接的 Subversion 库是 1.11.1. l请确认你选择了恰当的安装程序，否则可能造成安装失败. win x64

gcc-10.1.0 .tar.gz

C++编译gcc系统升级，源码升级核心编译实现最新版本。This page is a &quot;brief&quot; summary of some of the huge number of improvements in GCC 10. You may also want to check out our Porting to GCC 10 page and the full GCC documentation.

[Lotus.Notes.学习资料].Sams.Lotus.Notes.And.Domino.6.Development.eBook-LiB.chm

学习domino编程的好书. 建议下载.

hadoop-2.2.0-src.tar

hadoop源码2.2.0 Apache Hadoop 2.2.0 is the GA release of Apache Hadoop 2.x. Users are encouraged to immediately move to 2.2.0 since this release is significantly more stable and is guaranteed to remain compatible in terms of both APIs and protocols. To recap, this release has a number of significant highlights compared to Hadoop 1.x: YARN - A general purpose resource management system for Hadoop to allow MapReduce and other other data processing frameworks and services High Availability for HDFS HDFS Federation HDFS Snapshots NFSv3 access to data in HDFS Support for running Hadoop on Microsoft Windows Binary Compatibility for MapReduce applications built on hadoop-1.x Substantial amount of integration testing with rest of projects in the ecosystem A couple of important points to note while upgrading to hadoop-2.2.0: HDFS - The HDFS community decided to push the symlinks feature out to a future 2.3.0 release and is currently disabled. YARN/MapReduce - Users need to change ShuffleHandler service name from mapreduce.shuffle to mapreduce_shuffle. Please see the Hadoop 2.2.0 Release Notes for details.

nexus-3.5.1-02-unix.part2

Nexus Repository Manager OSS 3.x The latest version of Nexus Repository OSS, providing cutting-edge support for the formats below. Note: More information can be found in the documentation, release notes, upgrade notes and the Support Knowledge Base. Manage these formats: Bower Docker