buildroot-5.10 gt928驱动

/* drivers/input/touchscreen/gt9xx_update.c * * 2010 - 2012 Goodix Technology. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be a reference * to you, when you are integrating the GOODiX's CTP IC into your system, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * Latest Version: 2.2 * Author: andrew@goodix.com * Revision Record: * V1.0: * first release. By Andrew, 2012/08/31 * V1.2: * add force update,GT9110P pid map. By Andrew, 2012/10/15 * V1.4: * 1. add config auto update function; * 2. modify enter_update_mode; * 3. add update file cal checksum. * By Andrew, 2012/12/12 * V1.6: * 1. replace guitar_client with i2c_connect_client; * 2. support firmware header array update. * By Meta, 2013/03/11 * V2.2: * 1. multi-system supported * 2. flashless update no pid vid compare * By Meta, 2014/01/14 */ #include <linux/kthread.h> #include "gt9xx.h" #include <linux/namei.h> #include <linux/mount.h> #if ((GTP_AUTO_UPDATE && GTP_HEADER_FW_UPDATE) || GTP_COMPATIBLE_MODE) #include "gt9xx_firmware.h" #endif #define GUP_REG_HW_INFO 0x4220 #define GUP_REG_FW_MSG 0x41E4 #define GUP_REG_PID_VID 0x8140 #define GUP_SEARCH_FILE_TIMES 50 #define UPDATE_FILE_PATH_1 "/data/_goodix_update_.bin" #define UPDATE_FILE_PATH_2 "/sdcard/_goodix_update_.bin" #define CONFIG_FILE_PATH_1 "/data/_goodix_config_.cfg" #define CONFIG_FILE_PATH_2 "/sdcard/_goodix_config_.cfg" #define FW_HEAD_LENGTH 14 #define FW_SECTION_LENGTH 0x2000 // 8K #define FW_DSP_ISP_LENGTH 0x1000 // 4K #define FW_DSP_LENGTH 0x1000 // 4K #define FW_BOOT_LENGTH 0x800 // 2K #define FW_SS51_LENGTH (4 * FW_SECTION_LENGTH) // 32K #define FW_BOOT_ISP_LENGTH 0x800 // 2k #define FW_GLINK_LENGTH 0x3000 // 12k #define FW_GWAKE_LENGTH (4 * FW_SECTION_LENGTH) // 32k #define PACK_SIZE 256 #define MAX_FRAME_CHECK_TIME 5 #define _bRW_MISCTL__SRAM_BANK 0x4048 #define _bRW_MISCTL__MEM_CD_EN 0x4049 #define _bRW_MISCTL__CACHE_EN 0x404B #define _bRW_MISCTL__TMR0_EN 0x40B0 #define _rRW_MISCTL__SWRST_B0_ 0x4180 #define _bWO_MISCTL__CPU_SWRST_PULSE 0x4184 #define _rRW_MISCTL__BOOTCTL_B0_ 0x4190 #define _rRW_MISCTL__BOOT_OPT_B0_ 0x4218 #define _rRW_MISCTL__BOOT_CTL_ 0x5094 #define AUTO_SEARCH_BIN 0x01 #define AUTO_SEARCH_CFG 0x02 #define BIN_FILE_READY 0x80 #define CFG_FILE_READY 0x08 #define HEADER_FW_READY 0x00 #pragma pack(1) typedef struct { u8 hw_info[4]; //hardware info// u8 pid[8]; //product id // u16 vid; //version id // }st_fw_head; #pragma pack() typedef struct { u8 force_update; u8 fw_flag; struct file *file; struct file *cfg_file; st_fw_head ic_fw_msg; mm_segment_t old_fs; u32 fw_total_len; u32 fw_burned_len; }st_update_msg; st_update_msg update_msg; u16 show_len; u16 total_len; u8 got_file_flag = 0; u8 searching_file = 0; extern u8 config[GTP_CONFIG_MAX_LENGTH + GTP_ADDR_LENGTH]; extern void gtp_reset_guitar(struct i2c_client *client, s32 ms); extern s32 gtp_send_cfg(struct i2c_client *client); extern s32 gtp_read_version(struct i2c_client *, u16* ); extern struct i2c_client * i2c_connect_client; extern void gtp_irq_enable(struct goodix_ts_data *ts); extern void gtp_irq_disable(struct goodix_ts_data *ts); extern s32 gtp_i2c_read_dbl_check(struct i2c_client *, u16, u8 *, int); static u8 gup_burn_fw_gwake_section(struct i2c_client *client, u8 *fw_section, u16 start_addr, u32 len, u8 bank_cmd ); #define _CLOSE_FILE(p_file) if (p_file && !IS_ERR(p_file)) \ { \ filp_close(p_file, NULL); \ } #if GTP_ESD_PROTECT extern void gtp_esd_switch(struct i2c_client *, s32); #endif #if GTP_COMPATIBLE_MODE s32 gup_fw_download_proc(void *dir, u8 dwn_mode); #endif /******************************************************* Function: Read data from the i2c slave device. Input: client: i2c device. buf[0~1]: read start address. buf[2~len-1]: read data buffer. len: GTP_ADDR_LENGTH + read bytes count Output: numbers of i2c_msgs to transfer: 2: succeed, otherwise: failed *********************************************************/ s32 gup_i2c_read(struct i2c_client *client, u8 *buf, s32 len) { struct i2c_msg msgs[2]; s32 ret=-1; s32 retries = 0; GTP_DEBUG_FUNC(); msgs[0].flags = !I2C_M_RD; msgs[0].addr = client->addr; msgs[0].len = GTP_ADDR_LENGTH; msgs[0].buf = &buf[0]; #ifdef CONFIG_I2C_ROCKCHIP_COMPAT msgs[0].scl_rate=200 * 1000; //msgs[0].scl_rate = 300 * 1000; // for Rockchip, etc #endif msgs[1].flags = I2C_M_RD; msgs[1].addr = client->addr; msgs[1].len = len - GTP_ADDR_LENGTH; msgs[1].buf = &buf[GTP_ADDR_LENGTH]; #ifdef CONFIG_I2C_ROCKCHIP_COMPAT msgs[1].scl_rate=200 * 1000; //msgs[1].scl_rate = 300 * 1000; // for Rockchip, etc. #endif while(retries < 5) { ret = i2c_transfer(client->adapter, msgs, 2); if(ret == 2)break; retries++; } return ret; } /******************************************************* Function: Write data to the i2c slave device. Input: client: i2c device. buf[0~1]: write start address. buf[2~len-1]: data buffer len: GTP_ADDR_LENGTH + write bytes count Output: numbers of i2c_msgs to transfer: 1: succeed, otherwise: failed *********************************************************/ s32 gup_i2c_write(struct i2c_client *client,u8 *buf,s32 len) { struct i2c_msg msg; s32 ret=-1; s32 retries = 0; GTP_DEBUG_FUNC(); msg.flags = !I2C_M_RD; msg.addr = client->addr; msg.len = len; msg.buf = buf; #ifdef CONFIG_I2C_ROCKCHIP_COMPAT msg.scl_rate=200 * 1000; //msg.scl_rate = 300 * 1000; // for Rockchip, etc #endif while(retries < 5) { ret = i2c_transfer(client->adapter, &msg, 1); if (ret == 1)break; retries++; } return ret; } static s32 gup_init_panel(struct goodix_ts_data *ts) { s32 ret = 0; s32 i = 0; u8 check_sum = 0; u8 opr_buf[16]; u8 sensor_id = 0; u16 version = 0; u8 cfg_info_group1[] = CTP_CFG_GROUP1; u8 cfg_info_group2[] = CTP_CFG_GROUP2; u8 cfg_info_group3[] = CTP_CFG_GROUP3; u8 cfg_info_group4[] = CTP_CFG_GROUP4; u8 cfg_info_group5[] = CTP_CFG_GROUP5; u8 cfg_info_group6[] = CTP_CFG_GROUP6; u8 *send_cfg_buf[] = {cfg_info_group1, cfg_info_group2, cfg_info_group3, cfg_info_group4, cfg_info_group5, cfg_info_group6}; u8 cfg_info_len[] = { CFG_GROUP_LEN(cfg_info_group1), CFG_GROUP_LEN(cfg_info_group2), CFG_GROUP_LEN(cfg_info_group3), CFG_GROUP_LEN(cfg_info_group4), CFG_GROUP_LEN(cfg_info_group5), CFG_GROUP_LEN(cfg_info_group6)}; if ((!cfg_info_len[1]) && (!cfg_info_len[2]) && (!cfg_info_len[3]) && (