/**
@page GPIO_IOToggle GPIO_IOToggle
@verbatim
******************** (C) COPYRIGHT 2010 STMicroelectronics *******************
* @file GPIO/IOToggle/readme.txt
* @author MCD Application Team
* @version V3.3.0
* @date 04/16/2010
* @brief Description of the GPIO IOToggle Example.
******************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
******************************************************************************
@endverbatim
@par Example Description
This example describes how to use GPIO BSRR (Port bit set/reset register) and
BRR (Port bit reset register) for IO toggling.
These registers allow modifying only one or several GPIO pins in a single atomic
write access.
Four LEDs are toggled in an infinite loop.
@par Directory contents
- GPIO/IOToggle/stm32f10x_conf.h Library Configuration file
- GPIO/IOToggle/stm32f10x_it.c Interrupt handlers
- GPIO/IOToggle/stm32f10x_it.h Header for stm32f10x_it.c
- GPIO/IOToggle/main.c Main program
@par Hardware and Software environment
- This example runs on STM32F10x Connectivity line, High-Density, Medium-Density,
XL-Density, Medium-Density Value line, Low-Density and Low-Density Value line Devices.
- This example has been tested with STMicroelectronics STM32100B-EVAL (Medium-Density
Value line), STM3210C-EVAL (Connectivity line), STM3210E-EVAL (High-Density and
XL-Density) and STM3210B-EVAL (Medium-Density) evaluation boards and can be easily
tailored to any other supported device and development board.
To select the STMicroelectronics evaluation board used to run the example,
uncomment the corresponding line in stm32_eval.h file (under Utilities\STM32_EVAL)
- STM32100B-EVAL Set-up
- Use LED1, LED2, LED3 and LED4 connected respectively to PC.06, PC.07, PC.08
and PC.09 pins
- STM3210C-EVAL Set-up
- Use LED1, LED2, LED3 and LED4 connected respectively to PD.07, PD.13, PF.03
and PD.04 pins
- STM3210E-EVAL Set-up
- Use LED1, LED2, LED3 and LED4 connected respectively to PF.06, PF0.7, PF.08
and PF.09 pins
- STM3210B-EVAL Set-up
- Use LED1, LED2, LED3 and LED4 connected respectively to PC.06, PC.07, PC.08
and PC.09 pins
@par How to use it ?
In order to make the program work, you must do the following:
- Create a project and setup all project configuration
- Add the required Library files:
- stm32f10x_gpio.c
- stm32f10x_exti.c
- stm32f10x_rcc.c
- stm32f10x_usart.c
- misc.c
- stm32f10x_i2c.c
- stm32f10x_spi.c
- stm32_eval.c (under Utilities\STM32_EVAL)
- system_stm32f10x.c (under Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x)
- Edit stm32f10x.h file to select the device you are working on.
- Edit stm32_eval.h file to select the evaluation board you will use.
@b Tip: You can tailor the provided project template to run this example, for
more details please refer to "stm32f10x_stdperiph_lib_um.chm" user
manual; select "Peripheral Examples" then follow the instructions
provided in "How to proceed" section.
- Link all compiled files and load your image into target memory
- Run the example
@note
- Low-density Value line devices are STM32F100xx microcontrollers where the
Flash memory density ranges between 16 and 32 Kbytes.
- Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx
microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
- Medium-density Value line devices are STM32F100xx microcontrollers where
the Flash memory density ranges between 64 and 128 Kbytes.
- Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx
microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
- High-density devices are STM32F101xx and STM32F103xx microcontrollers where
the Flash memory density ranges between 256 and 512 Kbytes.
- XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
the Flash memory density ranges between 512 and 1024 Kbytes.
- Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
* <h3><center>© COPYRIGHT 2010 STMicroelectronics</center></h3>
*/
没有合适的资源?快使用搜索试试~ 我知道了~
STM32串口通信协议和状态机模式程序
共557个文件
h:92个
c:87个
d:84个
4星 · 超过85%的资源 需积分: 48 182 下载量 105 浏览量
2017-11-24
16:06:01
上传
评论 19
收藏 11.75MB RAR 举报
温馨提示
STM32串口通信协议和状态机模式程序,亲测能用。内有详细的讲解文档,很好的学习资料。
资源推荐
资源详情
资源评论
收起资源包目录
STM32串口通信协议和状态机模式程序 (557个子文件)
stm32f10x_it.__i 773B
systick.__i 755B
printf.__i 751B
stop.__i 743B
nvic.__i 743B
spi_flash.__i 652B
init.__i 632B
tft.__i 628B
printf.__i 503B
main.__i 493B
AA 3KB
demo_2.axf 589KB
stm32_can.axf 322KB
demo_2_uvopt.bak 87KB
stm32_can_uvopt.bak 66KB
demo_2_uvproj.bak 23KB
stm32_can_uvproj.bak 21KB
DelAll.BAT 375B
DelAll.BAT 375B
stm32f10x_tim.c 105KB
stm32f10x_tim.c 105KB
TFT_2.c 63KB
stm32f10x_flash.c 62KB
stm32f10x_flash.c 62KB
stm32f10x_rcc.c 50KB
stm32f10x_rcc.c 50KB
fonts.c 46KB
stm32f10x_adc.c 46KB
stm32f10x_adc.c 46KB
stm32f10x_i2c.c 43KB
stm32f10x_i2c.c 43KB
stm32f10x_usart.c 37KB
stm32f10x_usart.c 37KB
stm32f10x_fsmc.c 34KB
stm32f10x_fsmc.c 34KB
TFT.c 33KB
system_stm32f10x.c 31KB
system_stm32f10x.c 31KB
stm32f10x_can.c 31KB
stm32f10x_can.c 31KB
stm32f10x_spi.c 29KB
stm32f10x_spi.c 29KB
stm32f10x_sdio.c 28KB
stm32f10x_sdio.c 28KB
stm32f10x_dma.c 27KB
stm32f10x_dma.c 27KB
stm32f10x_gpio.c 19KB
stm32f10x_gpio.c 19KB
stm32f10x_dac.c 19KB
stm32f10x_dac.c 19KB
SPI_FLASH.c 17KB
core_cm3.c 17KB
core_cm3.c 17KB
stm32f10x_cec.c 11KB
stm32f10x_cec.c 11KB
stm32f10x_it.c 11KB
Printf.c 10KB
stm32f10x_pwr.c 9KB
stm32f10x_pwr.c 9KB
Printf.c 9KB
stm32f10x_rtc.c 8KB
stm32f10x_rtc.c 8KB
stm32f10x_bkp.c 8KB
stm32f10x_bkp.c 8KB
nRF24L01.c 7KB
misc.c 7KB
misc.c 7KB
stm32f10x_exti.c 7KB
stm32f10x_exti.c 7KB
key.c 6KB
Protocol.c 6KB
stm32f10x_wwdg.c 6KB
stm32f10x_wwdg.c 6KB
Timer3_Cap.c 5KB
Can.c 5KB
stm32f10x_dbgmcu.c 5KB
stm32f10x_dbgmcu.c 5KB
stm32f10x_iwdg.c 5KB
stm32f10x_iwdg.c 5KB
can_lp.c 4KB
ADXL345.c 4KB
stm32f10x_crc.c 3KB
stm32f10x_crc.c 3KB
key.c 3KB
ADC.c 3KB
STOP.c 3KB
ADXL345.c 3KB
SPI.c 3KB
can1.c 2KB
SPI.c 2KB
stm32f10x_it.c 2KB
NVIC.c 2KB
led.c 2KB
main.c 1KB
led.c 1KB
Queue.c 1KB
TIMER.c 1KB
TIMER.c 1KB
RCC_CONFIG.C 1KB
main.c 1KB
共 557 条
- 1
- 2
- 3
- 4
- 5
- 6
资源评论
- root.love2018-05-29好东西值得分享
- rucefan2021-05-23骗分的,哪有状态机。。
- maomaola20142018-01-14好东西值得分享
- 小枝E2019-01-13一般,没讲什么东西
吃土10086
- 粉丝: 11
- 资源: 41
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- STM32单片机FPGA毕设电路原理论文报告汽车电动助力转向单片机控制系统设计与试验研究
- STM32单片机FPGA毕设电路原理论文报告气压传感器神经网络算法及单片机实现
- STM32单片机FPGA毕设电路原理论文报告频率的测量在单片机设计中的应用
- 音频转码工具(用于将微信语音 amr 格式转换为 mp3 格式以便在 html5 的 audio 标签中进行播放).zip
- RDK-Web-Performance-Node
- STM32单片机FPGA毕设电路原理论文报告片式电容器浪涌及老化测试系统的设计与实现
- 一个简易的贪吃蛇小游戏(C语言作业).zip
- 国家游戏防沉迷系统接口(php)
- STM32单片机FPGA毕设电路原理论文报告片剂硬度测试仪的液晶显示界面设计
- STM32单片机FPGA毕设电路原理论文报告偏磁式消弧线圈的动态调谐装置
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功